geutebruck/GeViScope_SDK_Docs/GscActionsOverview_EN.txt

GEUTEBRUCK
GEVISCOPE actions
overview
english
v. 2.95, September 5, 2013
Dmitri Schamschurko
DRAFT
for internal use only
GEUTEBR ¨UCK GmbH
Im Nassen 7–9
D–53578 Windhagen
Deutschland
Tel:
+49 (0) 2645/137–0
Fax:
+49 (0) 2645/137–999
Web: www.geutebrueck.de


Abstract
This document gives an overview about GEVISCOPE actions in the current version
2.95 from September 5, 2013.
This document is part of the GEVISCOPE SDK.
Disclaimer
All possible care has been used to assure the information contained in this speciﬁ-
cation is as accurate and complete as possible. However, the author reserves the
rights not to be responsible for the topicality, correctness, completeness or qual-
ity of the information provided, and therefore is not liable for any damage caused
by the use of any information provided, including any kind of information which is
incomplete or incorrect.
The author reserves the rights to extend, change or delete parts or the complete
publication without separate announcement.


GEUTEBRUCK
Contents
1
General
15
1.1
Used notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
1.2
Action classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
2
ATM/ACS
16
2.1
ACS access denied . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
2.2
ACS access granted . . . . . . . . . . . . . . . . . . . . . . . . . .
17
2.3
ACS raw answer
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
2.4
ACS raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
2.5
ATM raw answer
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
2.6
ATM raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
2.7
ATM transaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
3
Audio control
18
3.1
ABC connect
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
3.2
ABC disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
3.3
ABC play ﬁle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
3.4
Sensor audio alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
4
Backup actions
19
4.1
Abort all auto backups . . . . . . . . . . . . . . . . . . . . . . . . .
19
4.2
Abort auto backup
. . . . . . . . . . . . . . . . . . . . . . . . . . .
19
4.3
Auto backup capacity ﬁle auto deleted . . . . . . . . . . . . . . . .
19
4.4
Auto backup capacity out of disk space . . . . . . . . . . . . . . . .
20
4.5
Auto backup capacity warning . . . . . . . . . . . . . . . . . . . . .
20
4.6
Auto backup ﬁle done
. . . . . . . . . . . . . . . . . . . . . . . . .
21
4.7
Auto backup ﬁle progress
. . . . . . . . . . . . . . . . . . . . . . .
21
4.8
Auto backup ﬁle started
. . . . . . . . . . . . . . . . . . . . . . . .
22
4.9
Auto backup operation done . . . . . . . . . . . . . . . . . . . . . .
22
4.10
Auto backup operation started . . . . . . . . . . . . . . . . . . . . .
23
4.11
Auto backup schedule done . . . . . . . . . . . . . . . . . . . . . .
23
4.12
Auto backup schedule started . . . . . . . . . . . . . . . . . . . . .
23
4.13
Backup event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
4.14
Event backup done . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
3


GEUTEBRUCK
4.15
Event backup ﬁle done . . . . . . . . . . . . . . . . . . . . . . . . .
24
4.16
Event backup ﬁle progress . . . . . . . . . . . . . . . . . . . . . . .
25
4.17
Event backup ﬁle started . . . . . . . . . . . . . . . . . . . . . . . .
25
4.18
Event backup started . . . . . . . . . . . . . . . . . . . . . . . . . .
25
4.19
Start auto backup . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
5
Camera control
26
5.1
Auto focus off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
5.2
Auto focus on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
5.3
Camera RAW output . . . . . . . . . . . . . . . . . . . . . . . . . .
26
5.4
Camera apply proﬁle . . . . . . . . . . . . . . . . . . . . . . . . . .
26
5.5
Camera backlight compensation mode . . . . . . . . . . . . . . . .
26
5.6
Camera clear preset text . . . . . . . . . . . . . . . . . . . . . . . .
27
5.7
Camera day/night mode . . . . . . . . . . . . . . . . . . . . . . . .
27
5.8
Camera light off . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
5.9
Camera light on . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
5.10
Camera manual iris off . . . . . . . . . . . . . . . . . . . . . . . . .
27
5.11
Camera manual iris on . . . . . . . . . . . . . . . . . . . . . . . . .
27
5.12
Camera off
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
5.13
Camera on
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
5.14
Camera pump off . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
5.15
Camera pump on . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
5.16
Camera select char mode . . . . . . . . . . . . . . . . . . . . . . .
28
5.17
Camera set preset text . . . . . . . . . . . . . . . . . . . . . . . . .
28
5.18
Camera spec func U off
. . . . . . . . . . . . . . . . . . . . . . . .
28
5.19
Camera spec func U on
. . . . . . . . . . . . . . . . . . . . . . . .
28
5.20
Camera spec func V off
. . . . . . . . . . . . . . . . . . . . . . . .
29
5.21
Camera spec func V on
. . . . . . . . . . . . . . . . . . . . . . . .
29
5.22
Camera spec func X off
. . . . . . . . . . . . . . . . . . . . . . . .
29
5.23
Camera spec func X on
. . . . . . . . . . . . . . . . . . . . . . . .
29
5.24
Camera spec func Y off
. . . . . . . . . . . . . . . . . . . . . . . .
29
5.25
Camera spec func Y on
. . . . . . . . . . . . . . . . . . . . . . . .
29
5.26
Camera stop all . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
5.27
Camera text off . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
5.28
Camera text on . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
4
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
5.29
Camera tour start . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
5.30
Camera tour stop . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
5.31
Camera version off . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
5.32
Camera version on . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
5.33
Camera wash-wipe off . . . . . . . . . . . . . . . . . . . . . . . . .
30
5.34
Camera wash-wipe on . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.35
Clear default position . . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.36
Clear preset position . . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.37
Fast speed off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.38
Fast speed on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.39
Focus far
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.40
Focus near
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
5.41
Focus stop
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
5.42
Iris close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
5.43
Iris open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
5.44
Iris stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
5.45
Move by speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
5.46
Move to absolute position . . . . . . . . . . . . . . . . . . . . . . .
32
5.47
Move to default position
. . . . . . . . . . . . . . . . . . . . . . . .
33
5.48
Move to preset position
. . . . . . . . . . . . . . . . . . . . . . . .
33
5.49
Move to relative position . . . . . . . . . . . . . . . . . . . . . . . .
33
5.50
Pan auto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
5.51
Pan left
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
5.52
Pan right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
5.53
Pan stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
5.54
Save default position . . . . . . . . . . . . . . . . . . . . . . . . . .
34
5.55
Save preset position . . . . . . . . . . . . . . . . . . . . . . . . . .
34
5.56
Set camera text . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
5.57
Tilt down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
5.58
Tilt stop
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
5.59
Tilt up
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
5.60
Zoom in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
5.61
Zoom out
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
5.62
Zoom stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
5


GEUTEBRUCK
6
Cash management actions
35
6.1
Safebag close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
6.2
Safebag data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
6.3
Safebag open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
6.4
Safebag passing of risk data . . . . . . . . . . . . . . . . . . . . . .
37
6.5
Safebag passing of risk start
. . . . . . . . . . . . . . . . . . . . .
37
6.6
Safebag passing of risk stop . . . . . . . . . . . . . . . . . . . . . .
37
7
Device information
38
7.1
Device found
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
7.2
Device plugin error . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
7.3
Device plugin state . . . . . . . . . . . . . . . . . . . . . . . . . . .
39
7.4
Device reattached
. . . . . . . . . . . . . . . . . . . . . . . . . . .
39
7.5
Device removed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39
7.6
New ﬁrmware received . . . . . . . . . . . . . . . . . . . . . . . . .
39
8
Digital contacts
40
8.1
Case has been closed . . . . . . . . . . . . . . . . . . . . . . . . .
40
8.2
Case has been opened
. . . . . . . . . . . . . . . . . . . . . . . .
40
8.3
Digital input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40
8.4
IOI43 reset mainboard . . . . . . . . . . . . . . . . . . . . . . . . .
40
8.5
IOI43 temperature notiﬁcation . . . . . . . . . . . . . . . . . . . . .
40
8.6
IOI43 watchdog activate . . . . . . . . . . . . . . . . . . . . . . . .
40
8.7
IOI43 watchdog deactivate . . . . . . . . . . . . . . . . . . . . . . .
41
8.8
IOI43 watchdog trigger . . . . . . . . . . . . . . . . . . . . . . . . .
41
8.9
Key pressed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
8.10
Key released
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
8.11
Reset mainboard . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
8.12
Set digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
8.13
Set system LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
8.14
Set system LED to blink . . . . . . . . . . . . . . . . . . . . . . . .
42
8.15
Temperature notiﬁcation . . . . . . . . . . . . . . . . . . . . . . . .
42
8.16
Watchdog activate
. . . . . . . . . . . . . . . . . . . . . . . . . . .
42
8.17
Watchdog deactivate . . . . . . . . . . . . . . . . . . . . . . . . . .
42
8.18
Watchdog trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
6
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
9
Imex
42
9.1
Imex capacity ﬁle auto deleted
. . . . . . . . . . . . . . . . . . . .
43
9.2
Imex capacity out of disk space. . . . . . . . . . . . . . . . . . . . .
43
9.3
Imex capacity warning . . . . . . . . . . . . . . . . . . . . . . . . .
43
9.4
Imex export event image . . . . . . . . . . . . . . . . . . . . . . . .
44
9.5
Imex export image from DB . . . . . . . . . . . . . . . . . . . . . .
44
9.6
Imex export image from live stream . . . . . . . . . . . . . . . . . .
44
10 LPS
44
10.1
LPS position data . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44
10.2
LPS query position . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
11 Lenel
45
11.1
Lenel access event . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
11.2
Lenel ﬁre event . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46
11.3
Lenel intercom event . . . . . . . . . . . . . . . . . . . . . . . . . .
47
11.4
Lenel raw data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
11.5
Lenel refresh names . . . . . . . . . . . . . . . . . . . . . . . . . .
47
11.6
Lenel security event
. . . . . . . . . . . . . . . . . . . . . . . . . .
48
11.7
Lenel video event . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
12 POS
49
12.1
Barcode data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
12.2
Filling pump status . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
12.3
Interface raw answer . . . . . . . . . . . . . . . . . . . . . . . . . .
49
12.4
Interface raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
12.5
POS data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
12.6
POS status
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
12.7
Terminal article data . . . . . . . . . . . . . . . . . . . . . . . . . .
50
12.8
Terminal payment data . . . . . . . . . . . . . . . . . . . . . . . . .
51
13 Perimeter protection
51
13.1
PP device alarm
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
13.2
PP device input . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
13.3
PP device ofﬂine . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
13.4
PP device online . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
7


GEUTEBRUCK
13.5
PP interface ofﬂine . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
13.6
PP interface online . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
13.7
PP query interface . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
13.8
PP set device output . . . . . . . . . . . . . . . . . . . . . . . . . .
52
13.9
PP subcell alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
13.10 PP zone alarm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
14 Remote export
53
14.1
Cancel export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
14.2
Export ﬁnished . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
14.3
Export progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
14.4
Initialize remote export . . . . . . . . . . . . . . . . . . . . . . . . .
54
14.5
Set export marker
. . . . . . . . . . . . . . . . . . . . . . . . . . .
54
14.6
Start remote export . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
14.7
Start scene store . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
15 SKIDATA
55
15.1
SKIDATA control
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
15.2
SKIDATA device event . . . . . . . . . . . . . . . . . . . . . . . . .
55
15.3
SKIDATA entry
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
15.4
SKIDATA exit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
15.5
SKIDATA transaction . . . . . . . . . . . . . . . . . . . . . . . . . .
56
16 Supply chain security
56
16.1
GSCS vehicle access denied . . . . . . . . . . . . . . . . . . . . .
56
16.2
GSCS vehicle access expired . . . . . . . . . . . . . . . . . . . . .
56
16.3
GSCS vehicle access granted . . . . . . . . . . . . . . . . . . . . .
57
16.4
GSCS vehicle access pending
. . . . . . . . . . . . . . . . . . . .
57
16.5
Log NPR recognition . . . . . . . . . . . . . . . . . . . . . . . . . .
58
16.6
Log barcode data . . . . . . . . . . . . . . . . . . . . . . . . . . . .
58
16.7
Log barcode data LPS . . . . . . . . . . . . . . . . . . . . . . . . .
58
17 System actions
59
17.1
Blocking ﬁlter activate
. . . . . . . . . . . . . . . . . . . . . . . . .
59
17.2
Blocking ﬁlter deactivate . . . . . . . . . . . . . . . . . . . . . . . .
59
17.3
Custom action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
59
8
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
17.4
Database recording info per ring
. . . . . . . . . . . . . . . . . . .
60
17.5
Database recording info total
. . . . . . . . . . . . . . . . . . . . .
60
17.6
Database started . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
17.7
Event recording changed
. . . . . . . . . . . . . . . . . . . . . . .
61
17.8
Event started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
17.9
Event stopped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
17.10 FRC notiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
17.11 GEMOS alarm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
17.12 IP switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
17.13 Kill all events
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
17.14 Kill event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
17.15 Kill event by instance . . . . . . . . . . . . . . . . . . . . . . . . . .
62
17.16 Live check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
17.17 Redundant power failure . . . . . . . . . . . . . . . . . . . . . . . .
63
17.18 Redundant power ok . . . . . . . . . . . . . . . . . . . . . . . . . .
63
17.19 SMRP viewer cleared
. . . . . . . . . . . . . . . . . . . . . . . . .
63
17.20 SMRP viewer connected . . . . . . . . . . . . . . . . . . . . . . . .
63
17.21 SMTP mail
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
63
17.22 Set clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
63
17.23 Set watchdog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
64
17.24 Setup changed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
64
17.25 Setup upload progress . . . . . . . . . . . . . . . . . . . . . . . . .
64
17.26 Start event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
64
17.27 Stop all events
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
17.28 Stop event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
17.29 Stop event by instance . . . . . . . . . . . . . . . . . . . . . . . . .
65
17.30 System error
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
17.31 System info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
17.32 System settings changed
. . . . . . . . . . . . . . . . . . . . . . .
66
17.33 System started . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
66
17.34 System terminating . . . . . . . . . . . . . . . . . . . . . . . . . . .
66
17.35 System warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
66
17.36 Transfer binary buffer . . . . . . . . . . . . . . . . . . . . . . . . . .
67
17.37 Transfer binary channel buffer . . . . . . . . . . . . . . . . . . . . .
67
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
9


GEUTEBRUCK
17.38 User login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
17.39 User login failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
17.40 User logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
18 Video control
68
18.1
Activate external process
. . . . . . . . . . . . . . . . . . . . . . .
68
18.2
CPA measurement . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
18.3
Change AD parameter set . . . . . . . . . . . . . . . . . . . . . . .
68
18.4
Change CPA parameter set . . . . . . . . . . . . . . . . . . . . . .
69
18.5
Change GTectVMX parameter set
. . . . . . . . . . . . . . . . . .
69
18.6
Change OBTRACK parameter set
. . . . . . . . . . . . . . . . . .
69
18.7
Change VMD parameter set . . . . . . . . . . . . . . . . . . . . . .
69
18.8
Change camera proﬁle . . . . . . . . . . . . . . . . . . . . . . . . .
69
18.9
Channel error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
18.10 Channel info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
18.11 Channel live check . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
18.12 Channel warning . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
18.13 Enable client VCA
. . . . . . . . . . . . . . . . . . . . . . . . . . .
71
18.14 G-Tect analytics live check . . . . . . . . . . . . . . . . . . . . . . .
71
18.15 G-Tect scene alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .
71
18.16 G-Tect scene alarm ﬁnished . . . . . . . . . . . . . . . . . . . . . .
71
18.17 G-Tect/Dual sensor alarm . . . . . . . . . . . . . . . . . . . . . . .
71
18.18 G-Tect/Dual sensor alarm ﬁnished
. . . . . . . . . . . . . . . . . .
72
18.19 G-Tect/VMX alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .
72
18.20 G-Tect/VMX alarm ﬁnished
. . . . . . . . . . . . . . . . . . . . . .
72
18.21 IAS settings changed . . . . . . . . . . . . . . . . . . . . . . . . . .
72
18.22 IP camera failover notiﬁcation . . . . . . . . . . . . . . . . . . . . .
72
18.23 IP camera failover restore . . . . . . . . . . . . . . . . . . . . . . .
73
18.24 IP camera raw command
. . . . . . . . . . . . . . . . . . . . . . .
73
18.25 Make CPA reference image . . . . . . . . . . . . . . . . . . . . . .
73
18.26 Media channel setup . . . . . . . . . . . . . . . . . . . . . . . . . .
73
18.27 NPR raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
74
18.28 NPR recognition
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
74
18.29 OBTRACK channel counter . . . . . . . . . . . . . . . . . . . . . .
75
18.30 OBTRACK channel counter threshold
. . . . . . . . . . . . . . . .
75
10
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.31 OBTRACK channel set counter . . . . . . . . . . . . . . . . . . . .
75
18.32 OBTRACK frame raw data . . . . . . . . . . . . . . . . . . . . . . .
75
18.33 OBTRACK group counter
. . . . . . . . . . . . . . . . . . . . . . .
76
18.34 OBTRACK group counter threshold . . . . . . . . . . . . . . . . . .
76
18.35 OBTRACK group set counter . . . . . . . . . . . . . . . . . . . . .
76
18.36 OBTRACK object raw data . . . . . . . . . . . . . . . . . . . . . . .
77
18.37 OBTRACK tunnel alarm . . . . . . . . . . . . . . . . . . . . . . . .
77
18.38 Sensor alarm ﬁnished
. . . . . . . . . . . . . . . . . . . . . . . . .
77
18.39 Sensor inhibit alarm ﬁnished . . . . . . . . . . . . . . . . . . . . . .
78
18.40 Sensor inhibit video alarm . . . . . . . . . . . . . . . . . . . . . . .
78
18.41 Sensor video alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
18.42 Set system time . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
18.43 Set test picture mode . . . . . . . . . . . . . . . . . . . . . . . . . .
79
18.44 VCA set armed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
18.45 VCA status answer . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
18.46 VCA status request . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
18.47 Video contrast detected
. . . . . . . . . . . . . . . . . . . . . . . .
79
18.48 Video contrast failed . . . . . . . . . . . . . . . . . . . . . . . . . .
80
18.49 Video set image brightness . . . . . . . . . . . . . . . . . . . . . .
80
18.50 Video set image contrast . . . . . . . . . . . . . . . . . . . . . . . .
80
18.51 Video set image saturation . . . . . . . . . . . . . . . . . . . . . . .
80
18.52 Video source has changed
. . . . . . . . . . . . . . . . . . . . . .
80
18.53 Video sync detected . . . . . . . . . . . . . . . . . . . . . . . . . .
81
18.54 Video sync failed . . . . . . . . . . . . . . . . . . . . . . . . . . . .
81
19 Viewer actions
81
19.1
VC alarm queue conﬁrm . . . . . . . . . . . . . . . . . . . . . . . .
81
19.2
VC alarm queue conﬁrm by instance . . . . . . . . . . . . . . . . .
81
19.3
VC alarm queue conﬁrm by type
. . . . . . . . . . . . . . . . . . .
81
19.4
VC alarm queue remove . . . . . . . . . . . . . . . . . . . . . . . .
82
19.5
VC alarm queue remove by instance . . . . . . . . . . . . . . . . .
82
19.6
VC alarm queue remove by type
. . . . . . . . . . . . . . . . . . .
82
19.7
VC alarm queue select . . . . . . . . . . . . . . . . . . . . . . . . .
82
19.8
VC alarm queue select by instance . . . . . . . . . . . . . . . . . .
82
19.9
VC alarm queue select by type
. . . . . . . . . . . . . . . . . . . .
82
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
11


GEUTEBRUCK
19.10 VC change scene by name
. . . . . . . . . . . . . . . . . . . . . .
83
19.11 VC clear scene by name . . . . . . . . . . . . . . . . . . . . . . . .
83
19.12 VC full mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
19.13 VC set audio level
. . . . . . . . . . . . . . . . . . . . . . . . . . .
83
19.14 VC show viewer text . . . . . . . . . . . . . . . . . . . . . . . . . .
83
19.15 VC stretch mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
19.16 Viewer change scene
. . . . . . . . . . . . . . . . . . . . . . . . .
84
19.17 Viewer change sync audio/video
. . . . . . . . . . . . . . . . . . .
84
19.18 Viewer clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
84
19.19 Viewer clear scene . . . . . . . . . . . . . . . . . . . . . . . . . . .
84
19.20 Viewer clear text output
. . . . . . . . . . . . . . . . . . . . . . . .
84
19.21 Viewer connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
84
19.22 Viewer connect live . . . . . . . . . . . . . . . . . . . . . . . . . . .
85
19.23 Viewer export picture . . . . . . . . . . . . . . . . . . . . . . . . . .
85
19.24 Viewer jump by time
. . . . . . . . . . . . . . . . . . . . . . . . . .
85
19.25 Viewer maximize . . . . . . . . . . . . . . . . . . . . . . . . . . . .
85
19.26 Viewer play from time
. . . . . . . . . . . . . . . . . . . . . . . . .
85
19.27 Viewer print picture . . . . . . . . . . . . . . . . . . . . . . . . . . .
86
19.28 Viewer select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
86
19.29 Viewer set play mode . . . . . . . . . . . . . . . . . . . . . . . . . .
86
19.30 Viewer show alarm by instance . . . . . . . . . . . . . . . . . . . .
86
19.31 Viewer show alarm by key . . . . . . . . . . . . . . . . . . . . . . .
86
19.32 Viewer show alarm by type
. . . . . . . . . . . . . . . . . . . . . .
87
19.33 Viewer text output . . . . . . . . . . . . . . . . . . . . . . . . . . . .
87
20 Viewer notiﬁcations
87
20.1
Image export notiﬁcation . . . . . . . . . . . . . . . . . . . . . . . .
87
20.2
Scene store modiﬁcation . . . . . . . . . . . . . . . . . . . . . . . .
88
20.3
VC alarm queue notiﬁcation . . . . . . . . . . . . . . . . . . . . . .
88
20.4
VC scene changed . . . . . . . . . . . . . . . . . . . . . . . . . . .
88
20.5
Viewer cleared
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
88
20.6
Viewer connected . . . . . . . . . . . . . . . . . . . . . . . . . . . .
89
20.7
Viewer play mode changed
. . . . . . . . . . . . . . . . . . . . . .
89
20.8
Viewer selection changed . . . . . . . . . . . . . . . . . . . . . . .
89
A Examples
90
12
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
Index
107
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
13


GEUTEBRUCK
14
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
1
General
1.1
Used notation
This section explains the notation used in this publication.
Consider the action ‘User login’. This action is described by the following section:
17.38 User login
This action will be ﬁred when the user has connected to the system.
• ﬁrst user – Name of the user connected to the system.
• second user – Name of the second user by four eyes authentication.
• remote host – Host from where the connection is done.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
The section heading – User login – gives the plain name of the action.
The line below describes the action brieﬂy.
The list of parameters – if any – completes the section. For every action’s parame-
ter its plain name – ﬁrst user , and its description are given. Optional parameters
are marked by red names.
1.2
Action classes
All GEVISCOPE actions are divided into the following action classes:
ATM/ACS
ATM and ACS actions.
Audio control
All actions to control the audio streams, also all notiﬁcations about the state
change of the audio streams.
Backup actions
All actions for backup.
Camera control
All actions to remote control the PTZ heads or camera adjustments.
Cash management actions
All actions for cash management.
Device information
All actions for low-level notiﬁcation of the device or media channels changes.
Digital contacts
All actions for handling digital inputs and outputs.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
15


GEUTEBRUCK
Imex
Image export.
LPS
LPS messages.
Lenel
Lenel.
POS
POS (point of sale).
Perimeter protection
Perimeter protection.
Remote export
Remote export.
SKIDATA
SKIDATA messages.
Supply chain security
Supply chain security.
System actions
All actions describing system behaviour.
Video control
All actions to control the video streams, also all notiﬁcations about the state
change of the video streams.
Viewer actions
All actions for viewer customizing.
Viewer notiﬁcations
All viewer notiﬁcations.
2
ATM/ACS
ATM and ACS actions.
2.1
ACS access denied
ACS access denied.
• ACS – ACS name.
• ACS no – ACS no.
• account – Account no.
• bank code – Bank code.
• card no – Card no.
• time stamp – Time stamp.
• reason – Reason.
16
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
2.2
ACS access granted
ACS access granted.
• ACS – ACS name.
• ACS no – ACS no.
• account – Account no.
• bank code – Bank code.
• card no – Card no.
• time stamp – Time stamp.
2.3
ACS raw answer
ACS raw answer.
• ACS – ACS name.
• time stamp – Time stamp.
• answer – ACS answer.
2.4
ACS raw data
ACS raw data.
• ACS – ACS name.
• time stamp – Time stamp.
• data – ACS data.
2.5
ATM raw answer
ATM raw answer.
• ATM – ATM name.
• time stamp – Time stamp.
• answer – ATM answer.
2.6
ATM raw data
ATM raw data.
• ATM – ATM name.
• time stamp – Time stamp.
• data – ATM data.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
17


GEUTEBRUCK
2.7
ATM transaction
ATM transaction.
• ATM – ATM name.
• new transaction – New transaction.
• photostep – Photostep.
• ATM no – ATM no.
• account – Account no.
• bank code – Bank code.
• card no – Card no.
• tan 1 – TAN 1.
• tan 2 – TAN 2.
• time stamp 1 – Time stamp 1.
• time stamp 2 – Time stamp 2.
• amount – Amount.
• currency – Currency.
3
Audio control
All actions to control the audio streams, also all notiﬁcations about the state change
of the audio streams.
3.1
ABC connect
Connect audio back channel.
• address – Address of the remote server.
3.2
ABC disconnect
Disconnect audio back channel.
This action has no parameters.
18
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
3.3
ABC play ﬁle
Play ﬁle on audio back channel.
• ﬁle ID – File ID.
• ﬁle name – Name of the ﬁle.
• repeat – Repeat ﬁle automatically
3.4
Sensor audio alarm
Audio alarm detected.
• channel – Channel.
4
Backup actions
All actions for backup.
4.1
Abort all auto backups
Abort all auto backups.
This action has no parameters.
4.2
Abort auto backup
Abort auto backup.
• schedule – Schedule.
4.3
Auto backup capacity ﬁle auto deleted
Auto backup capacity monitoring: ﬁle auto deleted.
• warning – Warning.
• destination – Destination.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated by GBF – Allocated by GBF.
• percent free – Percent free.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
19


GEUTEBRUCK
• percent allocated – Percent allocated.
• percent allocated by GBF – Percent allocated by GBF.
• ﬁle size – File size.
• ﬁle name – File name.
4.4
Auto backup capacity out of disk space
Auto backup capacity monitoring: out of disk space.
• warning – Warning.
• destination – Destination.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated by GBF – Allocated by GBF.
• percent free – Percent free.
• percent allocated – Percent allocated.
• percent allocated by GBF – Percent allocated by GBF.
4.5
Auto backup capacity warning
Auto backup capacity monitoring: capacity warning.
• warning – Warning.
• destination – Destination.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated by GBF – Allocated by GBF.
• percent free – Percent free.
• percent allocated – Percent allocated.
• percent allocated by GBF – Percent allocated by GBF.
20
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
4.6
Auto backup ﬁle done
Auto backup progress notiﬁcation: ﬁle done.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• operation count – Operation count.
• timer start – Timer start.
• operation index – Operation index.
• operation start time – Operation start time.
• source – Source.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• ﬁle index – File index.
• ﬁle name – File name.
• ﬁle size – File size.
4.7
Auto backup ﬁle progress
Auto backup progress notiﬁcation: ﬁle progress.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• operation count – Operation count.
• timer start – Timer start.
• operation index – Operation index.
• operation start time – Operation start time.
• source – Source.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• ﬁle index – File index.
• ﬁle name – File name.
• ﬁle size – File size.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
21


GEUTEBRUCK
4.8
Auto backup ﬁle started
Auto backup progress notiﬁcation: ﬁle started.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• operation count – Operation count.
• timer start – Timer start.
• operation index – Operation index.
• operation start time – Operation start time.
• source – Source.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• ﬁle index – File index.
• ﬁle name – File name.
4.9
Auto backup operation done
Auto backup progress notiﬁcation: operation done.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• operation count – Operation count.
• timer start – Timer start.
• operation index – Operation index.
• operation start time – Operation start time.
• operation stop time – Operation stop time.
• source – Source.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• error code – Operation error code.
22
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
4.10
Auto backup operation started
Auto backup progress notiﬁcation: operation started.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• operation count – Operation count.
• timer start – Timer start.
• operation index – Operation index.
• operation start time – Operation start time.
• source – Source.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
4.11
Auto backup schedule done
Auto backup progress notiﬁcation: schedule done.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• stop time – Schedule stop time.
• operation count – Operation count.
• timer start – Timer start.
4.12
Auto backup schedule started
Auto backup progress notiﬁcation: schedule started.
• schedule – Schedule.
• start time – Start time, empty during event backup.
• effective start time – Effective schedule start time.
• operation count – Operation count.
• timer start – Timer start.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
23


GEUTEBRUCK
4.13
Backup event
Backup event.
• instance ID – Instance ID of the event.
• event type – Type of the event.
• destination – Destination.
• start hint ID – Optional start hint ID.
• stop hint ID – Optional stop hint ID.
• sub folder – Sub folder to backup event.
4.14
Event backup done
Event backup progress notiﬁcation: backup done.
• job ID – Backup job ID.
• event type – Type of the event.
• instance ID – Instance ID of the event.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• start time – Backup start time.
• stop time – Backup stop time.
• error code – Operation error code.
4.15
Event backup ﬁle done
Event backup progress notiﬁcation: ﬁle done.
• job ID – Backup job ID.
• event type – Type of the event.
• instance ID – Instance ID of the event.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• start time – Effective backup start time.
• ﬁle index – File index.
• ﬁle name – File name.
• ﬁle size – File size.
24
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
4.16
Event backup ﬁle progress
Event backup progress notiﬁcation: ﬁle progress.
• job ID – Backup job ID.
• event type – Type of the event.
• instance ID – Instance ID of the event.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• start time – Effective backup start time.
• ﬁle index – File index.
• ﬁle name – File name.
• ﬁle size – File size.
4.17
Event backup ﬁle started
Event backup progress notiﬁcation: ﬁle started.
• job ID – Backup job ID.
• event type – Type of the event.
• instance ID – Instance ID of the event.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• start time – Effective backup start time.
• ﬁle index – File index.
• ﬁle name – File name.
4.18
Event backup started
Event backup progress notiﬁcation: backup started.
• job ID – Backup job ID.
• event type – Type of the event.
• instance ID – Instance ID of the event.
• destination – Destination.
• ﬁle size limit – File size limit.
• band width limit – Band width limit.
• start time – Backup start time.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
25


GEUTEBRUCK
4.19
Start auto backup
Start auto backup.
• schedule – Schedule.
5
Camera control
All actions to remote control the PTZ heads or camera adjustments.
5.1
Auto focus off
Disable auto focus of the camera.
• PTZ head – PTZ head.
5.2
Auto focus on
Enable auto focus of the camera.
• PTZ head – PTZ head.
5.3
Camera RAW output
Output unformatted command to the camera.
• PTZ head – PTZ head.
• output – RAW command to output.
5.4
Camera apply proﬁle
Apply a predeﬁned proﬁle settings to the camera.
• PTZ head – PTZ head.
• proﬁle – Proﬁle name.
5.5
Camera backlight compensation mode
Change backlight compensation mode of the camera.
• PTZ head – PTZ head.
• mode – Backlight compensation mode.
26
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
5.6
Camera clear preset text
Clear camera text for preset position.
• PTZ head – PTZ head.
• position – Preset position.
5.7
Camera day/night mode
Change day/night mode of the camera.
• PTZ head – PTZ head.
• mode – Day/night mode.
5.8
Camera light off
Turn camera light off.
• PTZ head – PTZ head.
5.9
Camera light on
Turn camera light on.
• PTZ head – PTZ head.
5.10
Camera manual iris off
Disable manual iris of the camera.
• PTZ head – PTZ head.
5.11
Camera manual iris on
Enable manual iris of the camera.
• PTZ head – PTZ head.
5.12
Camera off
Turn camera off.
• PTZ head – PTZ head.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
27


GEUTEBRUCK
5.13
Camera on
Turn camera on.
• PTZ head – PTZ head.
5.14
Camera pump off
Turn camera pump off.
• PTZ head – PTZ head.
5.15
Camera pump on
Turn camera pump on.
• PTZ head – PTZ head.
5.16
Camera select char mode
Select camera character mode.
• PTZ head – PTZ head.
• mode – Character mode.
5.17
Camera set preset text
Set camera text for preset position.
• PTZ head – PTZ head.
• position – Preset position.
5.18
Camera spec func U off
Turn camera special function U off.
• PTZ head – PTZ head.
5.19
Camera spec func U on
Turn camera special function U on.
• PTZ head – PTZ head.
28
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
5.20
Camera spec func V off
Turn camera special function V off.
• PTZ head – PTZ head.
5.21
Camera spec func V on
Turn camera special function V on.
• PTZ head – PTZ head.
5.22
Camera spec func X off
Turn camera special function X off.
• PTZ head – PTZ head.
5.23
Camera spec func X on
Turn camera special function X on.
• PTZ head – PTZ head.
5.24
Camera spec func Y off
Turn camera special function Y off.
• PTZ head – PTZ head.
5.25
Camera spec func Y on
Turn camera special function Y on.
• PTZ head – PTZ head.
5.26
Camera stop all
Camera stop all.
• PTZ head – PTZ head.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
29


GEUTEBRUCK
5.27
Camera text off
Disable camera text.
• PTZ head – PTZ head.
5.28
Camera text on
Enable camera text.
• PTZ head – PTZ head.
5.29
Camera tour start
Start camera tour.
• PTZ head – PTZ head.
• tour ID – Tour ID.
• tour name – Tour name.
5.30
Camera tour stop
Stop camera tour.
• PTZ head – PTZ head.
5.31
Camera version off
Hide camera version string.
• PTZ head – PTZ head.
5.32
Camera version on
Show camera version string.
• PTZ head – PTZ head.
5.33
Camera wash-wipe off
Turn camera wash-wipe off.
• PTZ head – PTZ head.
30
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
5.34
Camera wash-wipe on
Turn camera wash-wipe on.
• PTZ head – PTZ head.
5.35
Clear default position
Clear camera default position.
• PTZ head – PTZ head.
5.36
Clear preset position
Clear camera preset position.
• PTZ head – PTZ head.
• position – Preset position.
5.37
Fast speed off
Turn camera fast speed off.
• PTZ head – PTZ head.
5.38
Fast speed on
Turn camera fast speed on.
• PTZ head – PTZ head.
5.39
Focus far
Focus camera far.
• PTZ head – PTZ head.
• speed – Focus speed.
5.40
Focus near
Focus camera near.
• PTZ head – PTZ head.
• speed – Focus speed.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
31


GEUTEBRUCK
5.41
Focus stop
Stop camera focus.
• PTZ head – PTZ head.
5.42
Iris close
Close camera iris.
• PTZ head – PTZ head.
5.43
Iris open
Open camera iris.
• PTZ head – PTZ head.
5.44
Iris stop
Stop camera iris.
• PTZ head – PTZ head.
5.45
Move by speed
Move camera by speed.
• PTZ head – PTZ head.
• alpha speed – Speed in alpha (pan) direction (0/100 %).
• beta speed – Speed in beta (tilt) direction (0/100 %).
5.46
Move to absolute position
Move camera to absolute position.
• PTZ head – PTZ head.
• alpha – Alpha angle (-180/+180).
• beta – Beta angle (-90/+90).
• alpha speed – Speed in alpha direction (0/100 %).
• beta speed – Speed in beta direction (0/100 %).
32
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
5.47
Move to default position
Move camera to default position.
• PTZ head – PTZ head.
5.48
Move to preset position
Move camera to preset position.
• PTZ head – PTZ head.
• position – Preset position.
5.49
Move to relative position
Move camera to relative position.
• PTZ head – PTZ head.
• alpha – Alpha angle (-180/+180).
• beta – Beta angle (-90/+90).
• alpha speed – Speed in alpha direction (0/100 %).
• beta speed – Speed in beta direction (0/100 %).
5.50
Pan auto
Turn auto pan of the camera.
• PTZ head – PTZ head.
• modus – Pan modus.
5.51
Pan left
Pan camera to the left.
• PTZ head – PTZ head.
• speed – Pan speed.
5.52
Pan right
Pan camera to the right.
• PTZ head – PTZ head.
• speed – Pan speed.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
33


GEUTEBRUCK
5.53
Pan stop
Stop pan movement.
• PTZ head – PTZ head.
5.54
Save default position
Save current camera position as default position.
• PTZ head – PTZ head.
5.55
Save preset position
Save current camera position as preset position.
• PTZ head – PTZ head.
• position – Preset position.
5.56
Set camera text
Set camera text.
• PTZ head – PTZ head.
• text – Text to superimpose.
5.57
Tilt down
Tilt camera down.
• PTZ head – PTZ head.
• speed – Tilt speed.
5.58
Tilt stop
Stop tilt movement.
• PTZ head – PTZ head.
34
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
5.59
Tilt up
Tilt camera up.
• PTZ head – PTZ head.
• speed – Tilt speed.
5.60
Zoom in
Zoom camera in.
• PTZ head – PTZ head.
• speed – Zoom speed.
5.61
Zoom out
Zoom camera out.
• PTZ head – PTZ head.
• speed – Zoom speed.
5.62
Zoom stop
Stop camera zoom.
• PTZ head – PTZ head.
6
Cash management actions
All actions for cash management.
6.1
Safebag close
Safebag close.
• working place – Working place no.
• start time – Start time stamp.
• stop time – Stop time stamp.
• safebag no. – Safebag no.
• safebag info – Additional info about safebag.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
35


GEUTEBRUCK
• step ID – Processing step ID.
• debit – Debit.
• total – Total.
• difference – Difference between debit and total.
• has difference – Difference between debit and total is not zero.
• notes – Notes.
• coins – Coins.
• cheques – Cheques.
6.2
Safebag data
Safebag data.
• working place – Working place no.
• start time – Start time stamp.
• safebag no. – Safebag no.
• safebag info – Additional info about safebag.
• step ID – Processing step ID.
• debit – Debit.
• total – Total.
• difference – Difference between debit and total.
• has difference – Difference between debit and total is not zero.
• notes – Notes.
• coins – Coins.
• cheques – Cheques.
6.3
Safebag open
Safebag open.
• working place – Working place no.
• start time – Start time stamp.
• safebag no. – Safebag no.
• safebag info – Additional info about safebag.
• step ID – Processing step ID.
36
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
6.4
Safebag passing of risk data
Safebag passing of risk data.
• working place – Working place no.
• start time – Start time stamp.
• safebag no. – Safebag no.
• safebag info – Additional info about safebag.
• step ID – Processing step ID.
• user 1 – User who gives the safebag.
• user 2 – User who takes the safebag.
• tour no – Optional tour no.
• target working place – Target working place.
• passing of risk type – Passing of risk type.
6.5
Safebag passing of risk start
Safebag passing of risk start.
• working place – Working place no.
• start time – Start time stamp.
• safebag no. – Safebag no.
• safebag info – Additional info about safebag.
• step ID – Processing step ID.
• user 1 – User who gives the safebag.
• user 2 – User who takes the safebag.
• tour no – Optional tour no.
• target working place – Target working place.
• passing of risk type – Passing of risk type.
6.6
Safebag passing of risk stop
Safebag passing of risk stop.
• working place – Working place no.
• start time – Start time stamp.
• stop time – Stop time stamp.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
37


GEUTEBRUCK
• safebag no. – Safebag no.
• safebag info – Additional info about safebag.
• step ID – Processing step ID.
• user 1 – User who gives the safebag.
• user 2 – User who takes the safebag.
• tour no – Optional tour no.
• target working place – Target working place.
• passing of risk type – Passing of risk type.
7
Device information
All actions for low-level notiﬁcation of the device or media channels changes.
7.1
Device found
This action will be ﬁred when the USB or NET device is connected to the system.
It is also ﬁred at start-up for all detected devices.
• device type – Type of the device.
• device name – Device name if assigned in setup, empty otherwise.
• serial ID – Serial ID of the device.
7.2
Device plugin error
This action notiﬁes device plugin error.
• channel – Channel.
• device type – Type of the device.
• device subtype – Subtype of the device.
• device name – Device name.
• serial ID – Serial ID of the device.
• error class – Error class of the error occured.
• error code – Plugin type speciﬁc error code.
• description – Error description.
38
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
7.3
Device plugin state
This action notiﬁes device plugin state.
• channel – Channel.
• device type – Type of the device.
• device subtype – Subtype of the device.
• device name – Device name.
• serial ID – Serial ID of the device.
• plugin state – New plugin device state.
• internal state – Plugin device speciﬁc state.
• description – State description.
7.4
Device reattached
This action will be ﬁred when the USB or NET device is reattached to the system.
• device type – Type of the device.
• device name – Device name if assigned in setup, empty otherwise.
• serial ID – Serial ID of the device.
7.5
Device removed
This action will be ﬁred when the USB or NET device is disconnected from the
system. It is also ﬁred at the start-up for all parameterized but not present devices.
• device type – Type of the device.
• device name – Device name if assigned in setup, empty otherwise.
• serial ID – Serial ID of the device.
7.6
New ﬁrmware received
This action will be ﬁred when the USB or NET device has got the new ﬁrmware.
• device type – Type of the device.
• device name – Device name if assigned in setup, empty otherwise.
• serial ID – Serial ID of the device.
• ﬁrmware serial – Serial ID of the ﬁrmware.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
39


GEUTEBRUCK
8
Digital contacts
All actions for handling digital inputs and outputs.
8.1
Case has been closed
Case has been closed.
This action has no parameters.
8.2
Case has been opened
Case has been opened.
This action has no parameters.
8.3
Digital input
This action will be ﬁred when the state of the digital input has changed.
• contact – Contact.
• state – New state.
8.4
IOI43 reset mainboard
Reset mainboard using IOI43a/ab USB Alarm-I/O.
This action has no parameters.
8.5
IOI43 temperature notiﬁcation
Temperature notiﬁcation from IOI43a/ab USB Alarm-I/O.
• ID – ID of the IOI43 module (like IOI43-00).
• temperature – Temperature.
8.6
IOI43 watchdog activate
Activate watchdog on IOI43a/ab USB Alarm-I/O.
This action has no parameters.
40
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
8.7
IOI43 watchdog deactivate
Deactivate watchdog on IOI43a/ab USB Alarm-I/O.
This action has no parameters.
8.8
IOI43 watchdog trigger
Trigger watchdog on IOI43a/ab USB Alarm-I/O.
This action has no parameters.
8.9
Key pressed
This action is notiﬁed if one of the GEVISCOPE system keys is pressed.
• key – System key.
8.10
Key released
This action is notiﬁed if one of the GEVISCOPE system keys is released.
• key – System key.
8.11
Reset mainboard
Reset mainboard using IO device.
This action has no parameters.
8.12
Set digital output
This action is used to modify the state of the digital output and to notify this change.
• contact – Contact.
• state – New state.
8.13
Set system LED
This action is used to turn the system LEDs on or off.
• LED – System LED.
• state – New state.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
41


GEUTEBRUCK
8.14
Set system LED to blink
This action is used to blink the system LEDs.
• LED – System LED.
• LED time ON – Time in milliseconds when the LED will be switched on.
• LED time OFF – Time in milliseconds when the LED will be switched off.
8.15
Temperature notiﬁcation
Temperature notiﬁcation from a/ab USB Alarm-I/O.
• IO device type – Type of the device, which has ﬁred the action.
• ID – ID of the IO module (like IOI43-00/MIO84-00/MIO168-00).
• temperature – Temperature.
8.16
Watchdog activate
Activate watchdog.
This action has no parameters.
8.17
Watchdog deactivate
Deactivate watchdog.
This action has no parameters.
8.18
Watchdog trigger
Trigger watchdog.
This action has no parameters.
9
Imex
Image export.
42
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
9.1
Imex capacity ﬁle auto deleted
Imex capacity warning: ﬁle auto deleted.
• warning – Warning.
• destination – Destination.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated by image ﬁle – Allocated by image ﬁle.
• percent free – Percent free.
• percent allocated – Percent allocated.
• percent allocated by image ﬁle – Percent allocated by image ﬁle.
• total ﬁle size – Total ﬁle size.
• number of ﬁles – Number of ﬁles.
9.2
Imex capacity out of disk space.
Imex capacity warning: out of disk space.
• warning – Warning.
• destination – Destination.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated by image ﬁle – Allocated by image ﬁle.
• percent free – Percent free.
• percent allocated – Percent allocated.
• percent allocated by image ﬁle – Percent allocated by image ﬁle.
9.3
Imex capacity warning
Imex capacity warning: capacity warning.
• warning – Warning.
• destination – Destination.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated by image ﬁle – Allocated by image ﬁle.
• percent free – Percent free.
• percent allocated – Percent allocated.
• percent allocated by image ﬁle – Percent allocated by image ﬁle.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
43


GEUTEBRUCK
9.4
Imex export event image
Imex export event image.
• instance ID – Instance ID of the event.
• event type – Type of the event.
• destination – Destination.
• ﬁle name – File name.
9.5
Imex export image from DB
Imex export image from DB.
• channel – Channel.
• destination – Destination.
• ﬁle name – File name.
• picture time – Picture time.
9.6
Imex export image from live stream
Imex export image from live stream.
• channel – Channel.
• destination – Destination.
• ﬁle name – File name.
10
LPS
LPS messages.
10.1
LPS position data
LPS position data.
• tag ID – Tag ID.
• scanner ID – Scanner ID or IP address.
• X coordinate – X coordinate of cartesian coordinates.
• Y coordinate – Y coordinate of cartesian coordinates.
44
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
• Z coordinate – Z coordinate of cartesian coordinates.
• latitude – Latitude of geographic coordinates.
• longitude – Longitude of geographic coordinates.
• area ID – Area ID.
• cell ID – Cell ID.
• status – Status.
• time stamp – Time stamp.
• data – Data.
• area name – Area Name.
10.2
LPS query position
Send position query for a Tag to LPS server.
• tag ID – Tag ID.
• scanner ID – Scanner ID or IP address.
• data – Data.
11
Lenel
Lenel.
11.1
Lenel access event
Lenel OnGuard access event.
• ID – The ID that uniquely identiﬁes the type of this event.
• panel – The name of the panel where this event originated.
• device – The name of the device where this event originated.
• secondary device – The ID of the secondary device where this event origi-
nated.
• card number – The badge ID for the card that was read, if available.
• access result – The level of access that was granted that resulted from read-
ing the card.
• type – Event type i.e., duress, system, etc.
• subtype – Event sub-type i.e., granted, door forced open, etc.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
45


GEUTEBRUCK
• description – A human readable, brief description of this event.
• serial number – A number that uniquely identiﬁes the instance of the event
for a particular panel.
• time stamp – Time stamp.
• area entered – The ID of the area that was entered, if any.
• area exited – The ID of the area that was exited, if any.
• asset ID – The ID of the asset related to this event, if any.
• cardholder entered – Whether entry was made by the cardholder.
• duress
–
Indicates
whether
this
card
access
indicates
an
under
duress/emergency state.
• elevator ﬂoor – The elevator ﬂoor on which the access event was generated,
if any.
• facility code – The facility code for the card that was read, if available.
• readable card – Whether the card could be read.
• issue code – The issue code for the card that was read, if available.
• server host – Host name of the Communication server through which the
event arrived.
• event text – Text associated with event
11.2
Lenel ﬁre event
Lenel OnGuard ﬁre event.
• ID – The ID that uniquely identiﬁes the type of this event.
• panel – The name of the panel where this event originated.
• device – The name of the device where this event originated.
• secondary device – The ID of the secondary device where this event origi-
nated.
• trouble code – A trouble code associated with the ﬁre event.
• type – Event type i.e., duress, system, etc.
• subtype – Event sub-type i.e., granted, door forced open, etc.
• description – A human readable, brief description of this event.
• serial number – A number that uniquely identiﬁes the instance of the event
for a particular panel.
• time stamp – Time stamp.
• server host – Host name of the Communication server through which the
event arrived.
• event text – Text associated with event
46
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
11.3
Lenel intercom event
Lenel OnGuard intercom event.
• ID – The ID that uniquely identiﬁes the type of this event.
• panel – The name of the panel where this event originated.
• device – The name of the device where this event originated.
• secondary device – The ID of the secondary device where this event origi-
nated.
• intercom data – Additional data for the intercom event that occurred.
• line number – The line number involved in the intercom event.
• type – Event type i.e., duress, system, etc.
• subtype – Event sub-type i.e., granted, door forced open, etc.
• description – A human readable, brief description of this event.
• serial number – A number that uniquely identiﬁes the instance of the event
for a particular panel.
• time stamp – Time stamp.
• server host – Host name of the Communication server through which the
event arrived.
• event text – Text associated with event
11.4
Lenel raw data
Lenel OnGuard raw data.
• time stamp – Time stamp.
• data – Lenel OnGuard data.
11.5
Lenel refresh names
Lenel OnGuard refresh names.
This action has no parameters.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
47


GEUTEBRUCK
11.6
Lenel security event
Lenel OnGuard security event.
• ID – The ID that uniquely identiﬁes the type of this event.
• panel – The name of the panel where this event originated.
• device – The name of the device where this event originated.
• secondary device – The ID of the secondary device where this event origi-
nated.
• type – Event type i.e., duress, system, etc.
• subtype – Event sub-type i.e., granted, door forced open, etc.
• description – A human readable, brief description of this event.
• serial number – A number that uniquely identiﬁes the instance of the event
for a particular panel.
• time stamp – Time stamp.
• server host – Host name of the Communication server through which the
event arrived.
• event text – Text associated with event
11.7
Lenel video event
Lenel OnGuard video event.
• ID – The ID that uniquely identiﬁes the type of this event.
• panel – The name of the panel where this event originated.
• device – The name of the device where this event originated.
• secondary device – The ID of the secondary device where this event origi-
nated.
• channel – The physical channel the camera is connected to that is creating
this event.
• type – Event type i.e., duress, system, etc.
• subtype – Event sub-type i.e., granted, door forced open, etc.
• description – A human readable, brief description of this event.
• serial number – A number that uniquely identiﬁes the instance of the event
for a particular panel.
• time stamp – Time stamp.
• start stamp – The time the video event started
• end time – The time the video event ended.
• server host – Host name of the Communication server through which the
event arrived.
• event text – Text associated with event
48
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
12
POS
POS (point of sale).
12.1
Barcode data
Barcode data.
• scanner – Scanner name.
• time stamp – Time stamp.
• code – Barcode.
12.2
Filling pump status
Filling pump status.
• terminal – Terminal name.
• time stamp – Time stamp.
• pump no – Pump no.
• status – Status.
• amount – Amount.
• price – Price.
• details – Details.
12.3
Interface raw answer
Interface raw answer.
• interface – Interface name.
• time stamp – Time stamp.
• answer – Interface answer.
12.4
Interface raw data
Interface raw data.
• interface – Interface name.
• time stamp – Time stamp.
• data – Interface data.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
49


GEUTEBRUCK
12.5
POS data
POS data.
• POS – POS name.
• time stamp – Time stamp.
• article – Article description.
• price – Price.
• units – Number of units.
• price per unit – Price per unit.
• line 1 – Line 1.
• line 2 – Line 2.
• line 3 – Line 3.
• line 4 – Line 4.
• line 5 – Line 5.
12.6
POS status
POS status.
• POS – POS name.
• time stamp – Time stamp.
• status – Status.
• details – Details.
12.7
Terminal article data
Terminal article data.
• terminal – Terminal name.
• time stamp – Time stamp.
• cashier station – Cashier station.
• pump no – Pump no.
• alarm – Alarm status.
• amount – Amount.
• price – Price.
• details – Details.
50
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
12.8
Terminal payment data
Terminal payment data.
• terminal – Terminal name.
• time stamp – Time stamp.
• cashier station – Cashier station.
• pump no – Pump no.
• alarm – Alarm status.
• amount – Amount.
• price – Price.
• details – Details.
13
Perimeter protection
Perimeter protection.
13.1
PP device alarm
Perimeter protection device alarm.
• interface id – Interface ID.
• device address – Device address.
• sensor – Sensor.
• state – State.
13.2
PP device input
Perimeter protection device input.
• interface id – Interface ID.
• device address – Device address.
• input – Input.
• state – State.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
51


GEUTEBRUCK
13.3
PP device ofﬂine
Perimeter protection device ofﬂine.
• interface id – Interface ID.
• device address – Device address.
13.4
PP device online
Perimeter protection device online.
• interface id – Interface ID.
• device address – Device address.
13.5
PP interface ofﬂine
Perimeter protection interface ofﬂine.
• interface id – Interface ID.
13.6
PP interface online
Perimeter protection interface online.
• interface id – Interface ID.
13.7
PP query interface
Perimeter protection query interface.
• interface id – Interface ID.
13.8
PP set device output
Perimeter protection set device output.
• interface id – Interface ID.
• device address – Device address.
• output – Output.
• state – State.
52
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
13.9
PP subcell alarm
Perimeter protection subcell alarm.
• interface id – Interface ID.
• device address – Device address.
• cable – Cable.
• subcell – Subcell.
• state – State.
13.10
PP zone alarm
Perimeter protection zone alarm.
• zone id – Zone ID.
• interface id – Interface ID.
• device address – Device address.
• cable – Cable.
• subcell – Subcell.
• state – State.
14
Remote export
Remote export.
14.1
Cancel export
Cancel export.
• export GUID – Export GUID.
• abort ﬂag – Abort ﬂag.
14.2
Export ﬁnished
Export ﬁnished.
• export GUID – Export GUID.
• success – Success.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
53


GEUTEBRUCK
14.3
Export progress
Export progress.
• export GUID – Export GUID.
• progress – Progress.
14.4
Initialize remote export
Initialize remote export.
• viewer – Global viewer or viewer client no.
• device GUID – Pilot device GUID.
14.5
Set export marker
Set export marker.
• viewer – Global viewer or viewer client no.
• marker – Marker kind.
14.6
Start remote export
Start remote export.
• export GUID – Export GUID.
• device GUID – Pilot device GUID.
• format – Backup format.
• channel – Channel.
• start time – Start time.
• end time – End time.
• job ID – Job ID.
14.7
Start scene store
Start scene store.
• scene store GUID – Scene store GUID.
• cut-list – Cut-list.
• pre-history length – Pre-history length.
• recording length – Recording length.
54
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
15
SKIDATA
SKIDATA messages.
15.1
SKIDATA control
SKIDATA control information.
• interface – Interface name.
• state – Interface state.
15.2
SKIDATA device event
SKIDATA device event.
• interface – Interface name.
• device – Device ID.
• event code – Event code.
15.3
SKIDATA entry
SKIDATA entry.
• interface – Interface name.
• message – Message code.
• transaction – Transcaction ID.
• car park – Car park no.
• device – Device ID.
15.4
SKIDATA exit
SKIDATA exit.
• interface – Interface name.
• message – Message code.
• transaction – Transcaction ID.
• car park – Car park no.
• device – Device ID.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
55


GEUTEBRUCK
15.5
SKIDATA transaction
SKIDATA transaction.
• interface – Interface name.
• message – Message code.
• transaction – Transcaction ID.
• car park – Car park no.
• device – Device ID.
16
Supply chain security
Supply chain security.
16.1
GSCS vehicle access denied
GSCS vehicle access denied.
• sequence ID – The sequence ID.
• plate no. – Recognized plate no.
• time stamp – Time stamp.
• company category – Company category.
• company name – Company name.
• reason – Reason.
• trafﬁc lane – Trafﬁc lane.
• channel – Channel.
• direction – Direction.
16.2
GSCS vehicle access expired
GSCS vehicle access expired.
• sequence ID – The sequence ID.
• plate no. – Recognized plate no.
• time stamp – Time stamp.
• expiring time – Expiring time.
• company category – Company category.
56
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
• company name – Company name.
• reason – Reason.
• trafﬁc lane – Trafﬁc lane.
• channel – Channel.
• direction – Direction.
16.3
GSCS vehicle access granted
GSCS vehicle access granted.
• sequence ID – The sequence ID.
• plate no. – Recognized plate no.
• time stamp – Time stamp.
• company category – Company category.
• company name – Company name.
• reason – Reason.
• trafﬁc lane – Trafﬁc lane.
• channel – Channel.
• direction – Direction.
16.4
GSCS vehicle access pending
GSCS vehicle access pending.
• sequence ID – The sequence ID.
• plate no. – Recognized plate no.
• time stamp – Time stamp.
• company category – Company category.
• company name – Company name.
• reason – Reason.
• trafﬁc lane – Trafﬁc lane.
• channel – Channel.
• direction – Direction.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
57


GEUTEBRUCK
16.5
Log NPR recognition
Log NPR recognition.
• plate no. – Recognized plate no.
• hash value – Hash value.
• country – Country.
• channel – Channel.
• time stamp – Time stamp.
• restriction – Restriction of recognized number.
• category – Category of recognized number.
16.6
Log barcode data
Logistic barcode data.
• barcode – Barcode.
• hash value – Hash value.
• scanner name – Scanner name or IP address.
• area number – Area number.
• area name – Area name.
• channel – Channel.
• time stamp – Time stamp.
• order number – Order number.
• shipment number – Shipment number.
• item number – Item number.
16.7
Log barcode data LPS
Logistic barcode and LPS data.
• barcode – Barcode.
• hash value – Hash value.
• scanner name – Scanner name or IP address.
• area number – Area number.
• area name – Area name.
• channel – Channel.
58
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
• time stamp – Time stamp.
• X coordinate – X coordinate.
• Y coordinate – Y coordinate.
• Z coordinate – Z coordinate.
• LPS tag ID – LPS tag ID.
• LPS status – LPS status.
• LPS cell ID – LPS cell ID.
• LPS area ID – LPS area ID.
• user param – User param.
• order number – Order number.
• shipment number – Shipment number.
• item number – Item number.
17
System actions
All actions describing system behaviour.
17.1
Blocking ﬁlter activate
Blocking ﬁlter activate.
• ﬁlter – Blocking ﬁlter.
17.2
Blocking ﬁlter deactivate
Blocking ﬁlter deactivate.
• ﬁlter – Blocking ﬁlter.
17.3
Custom action
This action has no side effects and can be used for customer purposes.
• INT parameter – Numeric parameter.
• STRING parameter – Literal parameter.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
59


GEUTEBRUCK
17.4
Database recording info per ring
Database recording info per ring.
• database ring – Database ring.
• no video recording – Video is recording or not.
• no audio recording – Audio is recording or not.
• no recording – Video and/or audio is recording or not.
• video samples/s – Video samples per second.
• video samples MB/s – Video MB per second.
• audio samples/s – Audio samples per second.
• audio samples MB/s – Audio MB per second.
• write wait % – Write waiting times in percent.
• ring capacity – Ring capacity.
• oldest item – Time stamp of the oldest item.
• recording depth – Recording depth in hours.
• estimated required capacity – Estimated required capacity.
17.5
Database recording info total
Database recording info total.
• no video recording – Video is recording or not.
• no audio recording – Audio is recording or not.
• no recording – Video and/or audio is recording or not.
• video samples/s – Video samples per second.
• video samples MB/s – Video MB per second.
• audio samples/s – Audio samples per second.
• audio samples MB/s – Audio MB per second.
• write wait % – Write waiting times in percent.
• total capacity – Total capacity.
• free capacity – Free capacity.
• allocated capacity – Allocated capacity.
• oldest item – Time stamp of the oldest item.
• recording depth – Recording depth in hours.
• estimated required capacity – Estimated required capacity.
• required capacity factor – Required capacity factor.
• required capacity available – Required capacity available.
60
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
17.6
Database started
This action will be ﬁred at the database start-up.
• status – Database status message.
• total size – Database total size.
17.7
Event recording changed
Event recording settings are changed.
• instance ID – Instance ID of the event.
• event type – Type of the event.
17.8
Event started
Event has started.
• instance ID – Instance ID of the event.
• event type – Type of the event.
• foreign key – Optional foreign key used to start the alarm.
17.9
Event stopped
Event has stopped.
• instance ID – Instance ID of the event.
• event type – Type of the event.
17.10
FRC notiﬁcation
FRC notiﬁcation.
• notiﬁcation – Notiﬁcation reason.
• param – Additional parameter.
• description – Optional notiﬁcation text.
• additional info – Optional additional info (usually as XML string).
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
61


GEUTEBRUCK
17.11
GEMOS alarm
GEMOS alarm notiﬁcation.
• GEMOS key – GEMOS alarm key.
• GEMOS int – GEMOS alarm integer parameter.
• GEMOS str – GEMOS alarm string parameter.
17.12
IP switch operation
IP switch operation.
• operation – Operation.
• port no – Port no, IP address, MAC address.
• parameter – Optional parameter.
17.13
Kill all events
Kill all active events.
This action has no parameters.
17.14
Kill event
Kill event.
• event type – Type of the event.
17.15
Kill event by instance
Kill event by instance ID.
• instance ID – Instance ID of the event.
17.16
Live check
This action will be ﬁred every 10 seconds and is intended for use as live check.
• counter – This is the number of already ﬁred live check actions.
• time stamp – Current server time.
62
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
17.17
Redundant power failure
This action is notiﬁed if a failure of the redundant power supply is detected.
This action has no parameters.
17.18
Redundant power ok
This action is notiﬁed if a failure of the redundant power supply is removed.
This action has no parameters.
17.19
SMRP viewer cleared
SMRP viewer cleared.
This action has no parameters.
17.20
SMRP viewer connected
SMRP viewer connected to the camera.
• server – Server name.
• channel – Channel.
17.21
SMTP mail
This action will send a user deﬁned email if GSCMail is connected
• subject – Mail subject.
• to – Mail recipients.
• cc – Carbon copy recipients.
• body – Mail body.
• channel – Channel.
17.22
Set clock
Set clock.
• current time – Current time.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
63


GEUTEBRUCK
17.23
Set watchdog
Set watchdog.
• timeout – Timeout in seconds, before the watchdog must be retriggered and
before the hardware watchdog will set the hardware contact.
17.24
Setup changed
Setup changed.
• user name – Name of the user who modiﬁed the setup.
• remote host – Host from where the connection was done.
• current time – Current time.
• resource kind – Modiﬁed resource kind.
• resource ID – Modiﬁed resource ID.
• change kind – Change kind.
• details – Details of the modiﬁcation.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
17.25
Setup upload progress
Setup upload progress.
• ﬁrst user – Name of the user who modiﬁed the setup.
• second user – Name of the second user by four eyes authentication.
• remote host – Host from where the connection was done.
• progress % – Progress in percent.
• current time – Current stage time.
17.26
Start event
Start event.
• event type – Type of the event.
• foreign key – Optional foreign key used to store with alarm.
64
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
17.27
Stop all events
Stop all active events.
This action has no parameters.
17.28
Stop event
Stop event.
• event type – Type of the event.
17.29
Stop event by instance
Stop event by instance ID.
• instance ID – Instance ID of the event.
17.30
System error
Notify system error.
• source subsystem – Source of the message.
• message code – Kind of the message.
• Windows error code – Optional Windows error code.
• description – Optional description of the message.
• additional info – Optional additional info (usually as XML string).
17.31
System info
Notify system information.
• source subsystem – Source of the message.
• message code – Kind of the message.
• description – Optional description of the message.
• additional info – Optional additional info (usually as XML string).
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
65


GEUTEBRUCK
17.32
System settings changed
Setup of the system and/or the current time range changed.
• setup changed – System setup has changed.
• ﬁrst user – Name of the user who modiﬁed the setup.
• second user – Name of the second user by four eyes authentication.
• remote host – Host from where the connection was done.
• time range changed – Time range has changed.
• current time range – Currently active time range.
• licence changed – Licence has changed.
• change time – Time of the system settings changed.
17.33
System started
This action will be ﬁred only once at the system start-up.
• start time – Time of the system start-up.
17.34
System terminating
This action will be ﬁred when the system is going to be shut down.
• stop time – Time of the system shutdown.
• Windows shutdown – Indicates whether the system shutdown is done due to
the windows shutdown.
17.35
System warning
Notify system warning.
• source subsystem – Source of the message.
• message code – Kind of the message.
• Windows error code – Optional Windows error code.
• description – Optional description of the message.
• additional info – Optional additional info (usually as XML string).
66
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
17.36
Transfer binary buffer
Transfer binary buffer.
• internal handle – Internal handle.
• parameter – Parameter.
17.37
Transfer binary channel buffer
Transfer binary channel buffer.
• channel – Channel.
• internal handle – Internal handle.
• parameter – Parameter.
17.38
User login
This action will be ﬁred when the user has connected to the system.
• ﬁrst user – Name of the user connected to the system.
• second user – Name of the second user by four eyes authentication.
• remote host – Host from where the connection is done.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
17.39
User login failed
This action will be ﬁred when the user has tried to connect to the system but was
rejected.
• ﬁrst user – Name of the user who tried to connect to the system.
• second user – Name of the second user by four eyes authentication.
• remote host – Host from where the connection is done.
• reject reason – Reason of the rejection.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
67


GEUTEBRUCK
17.40
User logout
This action will be ﬁred when the user has disconnected from the system.
• ﬁrst user – Name of the user disconnected from the system.
• second user – Name of the second user by four eyes authentication.
• remote host – Host from where the connection was done.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
18
Video control
All actions to control the video streams, also all notiﬁcations about the state change
of the video streams.
18.1
Activate external process
Activate external process.
• channel – Channel.
• time stamp – Time stamp.
• external system – External system to activate.
18.2
CPA measurement
CPA measurement.
• channel – Channel.
• correlation – Correlation factor.
18.3
Change AD parameter set
This action changes the current AD parameter set of the video channel.
• channel – Channel.
• AD parameter set – The name of the new AD parameter set.
68
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.4
Change CPA parameter set
This action changes the current CPA parameter set of the video channel.
• channel – Channel.
• CPA parameter set – The name of the new CPA parameter set.
18.5
Change GTectVMX parameter set
This action changes the current GTectVMX parameter set of the video channel.
• channel – Channel.
• GTect parameter set – The name of the new GTect parameter set.
18.6
Change OBTRACK parameter set
This action changes the current OBTRACK parameter set of the video channel.
• channel – Channel.
• OBTRACK parameter set – The name of the new OBTRACK parameter set.
18.7
Change VMD parameter set
This action changes the current VMD parameter set of the video channel.
• channel – Channel.
• VMD parameter set – The name of the new VMD parameter set.
18.8
Change camera proﬁle
This action changes the current camera proﬁle of the hardware module.
• hardware – Hardware module.
• proﬁle – The name of the camera proﬁle.
18.9
Channel error
Notify channel error.
• channel – Channel.
• sensor type – Sensor type.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
69


GEUTEBRUCK
• source subsystem – Source of the message.
• message code – Kind of the message.
• Windows error code – Optional Windows error code.
• description – Optional description of the message.
• additional info – Optional additional info (usually as XML string).
18.10
Channel info
Notify channel information.
• channel – Channel.
• sensor type – Sensor type.
• source subsystem – Source of the message.
• message code – Kind of the message.
• description – Optional description of the message.
• additional info – Optional additional info (usually as XML string).
18.11
Channel live check
This action notiﬁes that the channel is alive.
• channel – Channel.
• sensor type – Sensor type.
• time stamp – Time stamp.
18.12
Channel warning
Notify channel warning.
• channel – Channel.
• sensor type – Sensor type.
• source subsystem – Source of the message.
• message code – Kind of the message.
• Windows error code – Optional Windows error code.
• description – Optional description of the message.
• additional info – Optional additional info (usually as XML string).
70
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.13
Enable client VCA
Enable client VCA
• channel – Channel.
• VCA Type – VCA Type
• enabled – Enabled
18.14
G-Tect analytics live check
This action will be ﬁred periodically to ensure that analytics client is still running.
This action has no parameters.
18.15
G-Tect scene alarm
This action will be ﬁred when G-Tect Video content analysis detects a scene alarm.
• channel – Channel.
• alarm reason – Alarm reason.
18.16
G-Tect scene alarm ﬁnished
This action will be ﬁred when G-Tect Video content analysis scene alarm is ﬁn-
ished.
• channel – Channel.
• alarm reason – Alarm reason.
18.17
G-Tect/Dual sensor alarm
This action will be ﬁred when G-Tect/Dual sensor detects an alarm.
• channel – Channel.
• sterile zone number – Sterile Zone Number
• virtual fence number – Virtual Fence Number.
• VMD alarm group – VMD alarm group.
• VMD zone – VMD zone nr.
• VMD cycle – VMD measure cycle.
• alarm area – Alarm area.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
71


GEUTEBRUCK
18.18
G-Tect/Dual sensor alarm ﬁnished
This action will be ﬁred when the alarm is ﬁnished.
• channel – Channel.
18.19
G-Tect/VMX alarm
This action will be ﬁred when G-Tect/VMX Video content analysis detects an alarm.
• channel – Channel.
• sterile zone number – Sterile Zone Number
• virtual fence number – Virtual Fence Number.
• group zones or fences – Used to group different Zones or fences to the same
level.
• internal track ID – Internal Track ID.
• alarm area – Alarm area.
18.20
G-Tect/VMX alarm ﬁnished
This action will be ﬁred when the alarm is ﬁnished.
• channel – Channel.
18.21
IAS settings changed
IAS settings changed.
• channel – Channel.
• sensor type – Sensor type.
18.22
IP camera failover notiﬁcation
IP camera failover notiﬁcation.
• primary server – The name of the primary server.
• secondary server – The name of the secondary server.
• primary channel – Primary channel.
• secondary channel – Secondary channel.
• camera parameters – Optional camera parameters.
72
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.23
IP camera failover restore
IP camera failover restore.
• primary server – The name of the primary server.
• secondary server – The name of the secondary server.
• primary channel – Primary channel.
• secondary channel – Secondary channel.
• camera parameters – Optional camera parameters.
18.24
IP camera raw command
This action sends a special command to the IP camera.
• url – Complete command URL (like http://192.168.0.165:80/set?daynight=night).
• user – User name to authenticate by the camera (optional).
• password – Password to authenticate by the camera (optional).
• post – POST parameters (optional, separate lines with
r
n).
18.25
Make CPA reference image
Make CPA reference image.
• channel – Channel.
18.26
Media channel setup
Media channel setup info.
• channel – Channel.
• time stamp – Time stamp.
• parameter – Parameter.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
73


GEUTEBRUCK
18.27
NPR raw data
NPR raw data.
• plate no. – Recognized plate no.
• country – Country.
• channel – Channel.
• time stamp – Time stamp.
• zone rect – Zone rectangle.
• weight – Weight of recognition.
• zone state – Zone state.
• zone status – Zone status.
• speed – Speed in km/h
• direction – Direction of the motion.
• zone index – Zone index.
• best – Current recognition is best.
• plate width – Plate width.
• plate height – Plate height.
• plate angle – Plate angle.
• symbol height – Symbol height.
• type – Number type.
18.28
NPR recognition
NPR recognition.
• plate no. – Recognized plate no.
• country – Country.
• channel – Channel.
• time stamp – Time stamp.
• zone rect – Zone rectangle.
• restriction – Restriction of recognized number.
• category – Category of recognized number.
• speed – Speed in km/h
• direction – Direction of the motion.
• zone index – Zone index.
• type – Number type.
• weight – Weight of recognition.
74
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.29
OBTRACK channel counter
OBTRACK channel counter.
• channel – Channel.
• counter type – Counter type.
• counter value – Counter value.
• object direction – Object direction.
• time stamp – Time stamp.
• reset time stamp – Reset time stamp.
18.30
OBTRACK channel counter threshold
OBTRACK channel counter threshold.
• channel – Channel.
• counter type – Counter type.
• counter value – Counter value.
• exceeding direction – Exceeding direction.
• time stamp – Time stamp.
18.31
OBTRACK channel set counter
OBTRACK channel set counter.
• channel – Channel.
• counter type – Counter type.
• counter value – Counter value.
• time stamp – Time stamp.
18.32
OBTRACK frame raw data
OBTRACK frame raw data.
• time stamp – Time stamp.
• channel – Channel.
• brightness – Brightness.
• contrast – Contrast.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
75


GEUTEBRUCK
18.33
OBTRACK group counter
OBTRACK group counter.
• group ID – Group ID.
• counter type – Counter type.
• counter value – Counter value.
• object direction – Object direction.
• time stamp – Time stamp.
• reset time stamp – Reset time stamp.
• group name – Group name.
18.34
OBTRACK group counter threshold
OBTRACK group counter threshold.
• group ID – Group ID.
• counter type – Counter type.
• counter value – Counter value.
• exceeding direction – Exceeding direction.
• time stamp – Time stamp.
• group name – Group name.
18.35
OBTRACK group set counter
OBTRACK group set counter.
• group ID – Group ID.
• counter type – Counter type.
• counter value – Counter value.
• time stamp – Time stamp.
• group name – Group name.
76
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.36
OBTRACK object raw data
OBTRACK object raw data.
• time stamp – Time stamp.
• channel – Channel.
• area no – Area no.
• object ID – Object ID.
• object status – Object status.
• object class – Object class.
• conﬁdence – Conﬁdence.
• position – Position.
• speed – Speed.
• duration – Duration.
• direction – Direction.
• object size – Object size.
• object width – Object width in meters.
• object height – Object height in meters.
• process size – Process size.
• GSC net name – GeViScope network name.
18.37
OBTRACK tunnel alarm
OBTRACK tunnel alarm notiﬁcation.
• channel – Channel.
• time stamp – Time stamp.
• alarm reason – Alarm reason.
• object ID – Object ID.
• alarm area ID – Alarm area ID.
• object area – Object area.
18.38
Sensor alarm ﬁnished
This action will be ﬁred when the alarm is ﬁnished.
• channel – Channel.
• sensor type – Sensor type.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
77


GEUTEBRUCK
18.39
Sensor inhibit alarm ﬁnished
This action will be ﬁred when the inhibit alarm is ﬁnished.
• channel – Channel.
• sensor type – Sensor type.
18.40
Sensor inhibit video alarm
This action will be ﬁred when the motion in inhibit area is detected.
• channel – Channel.
• sensor type – Sensor type.
• AD alarm area – AD alarm area.
• AD cell – AD cell nr.
• VMD alarm group – VMD alarm group.
• VMD zone – VMD zone nr.
• VMD cycle – VMD measure cycle.
• alarm area – Alarm area.
• object class – OBTRACK object class.
18.41
Sensor video alarm
This action will be ﬁred when video alarm is detected.
• channel – Channel.
• sensor type – Sensor type.
• AD alarm area – AD alarm area.
• AD cell – AD cell nr.
• VMD alarm group – VMD alarm group.
• VMD zone – VMD zone nr.
• VMD cycle – VMD measure cycle.
• alarm area – Alarm area.
• object class – OBTRACK object class.
78
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.42
Set system time
Set system time.
• time stamp – Time stamp.
18.43
Set test picture mode
Enable or disable test picture generator.
• channel – Channel.
• enable – Enable or disable test picture generator.
18.44
VCA set armed
Send this action to notify VCA to be armed or disarmed.
• Channel – Channel.
• Sensor type – Sensor type.
• Armed (true) or disarmed (false) – Armed (true) or disarmed (false)
18.45
VCA status answer
This action will be sent in response to VCA status request.
• Channel – Channel.
• Sensor type – Sensor type.
• Armed (true) or disarmed (false) – Armed (true) or disarmed (false)
18.46
VCA status request
Send this action to request status of VCA. As response VCA will send VCA status
answer.
• Channel – Channel.
• Sensor type – Sensor type.
18.47
Video contrast detected
This action will be ﬁred when the contrast is detected in the video signal.
• channel – Channel.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
79


GEUTEBRUCK
18.48
Video contrast failed
This action will be ﬁred when the contrast is lost in the video signal.
• channel – Channel.
18.49
Video set image brightness
Video set image brightness.
• channel – Channel.
• sensor type – Sensor type.
• brightness – Brightness.
18.50
Video set image contrast
Video set image contrast.
• channel – Channel.
• sensor type – Sensor type.
• contrast – Contrast.
18.51
Video set image saturation
Video set image saturation.
• channel – Channel.
• sensor type – Sensor type.
• saturation – Saturation.
18.52
Video source has changed
This action indicates the changes on the video input source.
• channel – Channel.
• signal norm – New signal norm.
• signal type – New signal type.
• interlace type – New interlace type.
80
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
18.53
Video sync detected
This action will be ﬁred when the sync is detected in the video signal.
• channel – Channel.
18.54
Video sync failed
This action will be ﬁred when the sync is lost in the video signal.
• channel – Channel.
19
Viewer actions
All actions for viewer customizing.
19.1
VC alarm queue conﬁrm
Conﬁrm alarm from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• selection mode – Selection mode.
19.2
VC alarm queue conﬁrm by instance
Conﬁrm alarm from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• instance ID – Instance ID of the alarm.
19.3
VC alarm queue conﬁrm by type
Conﬁrm alarm of speciﬁc type from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• event type – Type of the event.
• selection mode – Selection mode.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
81


GEUTEBRUCK
19.4
VC alarm queue remove
Remove alarm from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• selection mode – Selection mode.
19.5
VC alarm queue remove by instance
Remove alarm from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• instance ID – Instance ID of the alarm.
19.6
VC alarm queue remove by type
Remove alarm of speciﬁc type from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• event type – Type of the event.
• selection mode – Selection mode.
19.7
VC alarm queue select
Select alarm from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• selection mode – Selection mode.
19.8
VC alarm queue select by instance
Select alarm from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• instance ID – Instance ID of the alarm.
19.9
VC alarm queue select by type
Select alarm of speciﬁc type from the queue on the viewer client.
• viewer – Global viewer or viewer client no.
• event type – Type of the event.
• selection mode – Selection mode.
82
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
19.10
VC change scene by name
Viewer client change scene by name.
• viewer – Global viewer or viewer client no.
• scene – Scene name.
19.11
VC clear scene by name
Viewer client clear scene by name.
• viewer – Global viewer or viewer client no.
• scene – Scene name.
19.12
VC full mode
Viewer client full mode.
• viewer – Global viewer or viewer client no.
• full mode – Switch viewer client in full mode.
• sensitive area enabled – Sensitive area enabled.
19.13
VC set audio level
Viewer client set audio level.
• viewer – Global viewer or viewer client no.
• audio level – Audio level in range 0 (audio off) till 100 (max. volume).
19.14
VC show viewer text
Viewer client show viewer text.
• viewer – Global viewer or viewer client no.
• show text – Show text in viewer client.
19.15
VC stretch mode
Viewer client stretch mode.
• viewer – Global viewer or viewer client no.
• stretch mode – Switch viewer client in stretch mode.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
83


GEUTEBRUCK
19.16
Viewer change scene
Viewer change scene.
• viewer – Global viewer or viewer client no.
19.17
Viewer change sync audio/video
Viewer change sync audio/video.
• viewer – Global viewer or viewer client no.
• enable sync – Enable audio/video sync.
19.18
Viewer clear
Clear viewer.
• viewer – Global viewer or viewer client no.
19.19
Viewer clear scene
Viewer clear scene.
• viewer – Global viewer or viewer client no.
19.20
Viewer clear text output
Clear text output in the given viewer.
• viewer – Global viewer or viewer client no.
19.21
Viewer connect
Connect camera to the viewer.
• viewer – Global viewer or viewer client no.
• channel – Channel.
• play mode – Viewer play mode.
84
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
19.22
Viewer connect live
Connect live camera to the viewer.
• viewer – Global viewer or viewer client no.
• channel – Channel.
19.23
Viewer export picture
Viewer export picture.
• viewer – Global viewer or viewer client no.
• ﬁle path – File path (local or UNC). GSCView default path is used if left empty.
19.24
Viewer jump by time
Viewer jump by time.
• viewer – Global viewer or viewer client no.
• channel – Channel.
• play mode – Viewer play mode.
• time in sec – Time to jump in seconds. Use negative values to jump in past.
19.25
Viewer maximize
Viewer maximize.
• viewer – Global viewer or viewer client no.
• maximize – Maximize.
19.26
Viewer play from time
Viewer play from time.
• viewer – Global viewer or viewer client no.
• channel – Channel.
• play mode – Viewer play mode.
• time – Time to play from.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
85


GEUTEBRUCK
19.27
Viewer print picture
Viewer print picture.
• viewer – Global viewer or viewer client no.
19.28
Viewer select
Select viewer.
• viewer – Global viewer or viewer client no.
19.29
Viewer set play mode
Set play mode of the viewer.
• viewer – Global viewer or viewer client no.
• play mode – Viewer play mode.
• play speed – Optional play speed parameter.
19.30
Viewer show alarm by instance
Show alarm in viewer using alarm instance ID.
• viewer – Global viewer or viewer client no.
• instance ID – Instance ID of the alarm.
• play mode – Viewer alarm’s play mode.
19.31
Viewer show alarm by key
Show alarm in viewer using alarm foreign key.
• viewer – Global viewer or viewer client no.
• foreign key – Foreign key used to start the alarm.
• play mode – Viewer alarm’s play mode.
86
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
19.32
Viewer show alarm by type
Show alarm in viewer using alarm type and optional foreign key.
• viewer – Global viewer or viewer client no.
• alarm type – Type of the alarm.
• foreign key – Foreign key used to start the alarm.
• play mode – Viewer alarm’s play mode.
19.33
Viewer text output
Display free string in the given viewer.
• viewer – Global viewer or viewer client no.
• text string – Text string to display.
20
Viewer notiﬁcations
All viewer notiﬁcations.
20.1
Image export notiﬁcation
Notiﬁcation on export or print of channel images.
• user – Name of the user connected to the system.
• destination – Destination.
• destination type – Destination type.
• time stamp – Time stamp.
• end time – End time.
• channels – Channels.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
87


GEUTEBRUCK
20.2
Scene store modiﬁcation
Scene store modiﬁcation.
• viewer – Global viewer or viewer client no.
• scene store GUID – Scene store GUID.
• scene store name – Scene store name.
• time stamp – Time stamp.
• modiﬁcation type – Modiﬁcation type.
• user – Name of the user.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
20.3
VC alarm queue notiﬁcation
Alarm queue notiﬁcation on the viewer client.
• viewer – Global viewer or viewer client no.
• notiﬁcation – Alarm state notiﬁcation.
• instance ID – Instance ID of the alarm.
• event type – Type of the event.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
20.4
VC scene changed
Viewer client scene changed.
• viewer – Global viewer or viewer client no.
• scene – Scene name.
20.5
Viewer cleared
Viewer cleared.
• viewer – Global viewer or viewer client no.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
88
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
20.6
Viewer connected
Viewer connected to the camera.
• viewer – Global viewer or viewer client no.
• channel – Channel.
• play mode – Viewer play mode.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
20.7
Viewer play mode changed
Viewer play mode changed.
• viewer – Global viewer or viewer client no.
• channel – Channel.
• play mode – Viewer play mode.
• channel time – Channel time.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
20.8
Viewer selection changed
Viewer selection was changed.
• viewer – Global viewer or viewer client no.
• channel – Channel.
• play mode – Viewer play mode.
• client host – Host from where the connection is done.
• client type – Client type.
• client account – User account from where the connection is done.
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
89


GEUTEBRUCK
A
Examples
The following list contains the example notation of all GEVISCOPE actions. If the
action has some optional parameters, then the notation without them is also given
in the third line.
Following numeric values used in this: 64 for 64 bit integer numbers, 32 for 32 bit
integer numbers, 1 for boolean values, and 0 for enumeration types.
ABCConnect ("address")
ABCDisconnect ()
ABCPlayFile (64, "file name", 1)
AbortAllAutoBackups ()
AbortAutoBackup ("schedule")
ACSAccessDenied ("ACS", ACSNo:
32, Account:
64,
BancCode:
64, CardNo:
"card no", TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00", Reason:
32)
ACSAccessDenied ("ACS")
ACSAccessGranted ("ACS", ACSNo:
32, Account:
64,
BancCode:
64, CardNo:
"card no", TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00")
ACSAccessGranted ("ACS")
ACSRawAnswer ("ACS", "2013/09/05 14:59:59,999 GMT+02:00",
"answer")
ACSRawData ("ACS", "2013/09/05 14:59:59,999 GMT+02:00",
"data")
ActivateExternalProcess (32, "2013/09/05 14:59:59,999 GMT+02:00",
0)
ATMRawAnswer ("ATM", "2013/09/05 14:59:59,999 GMT+02:00",
"answer")
ATMRawData ("ATM", "2013/09/05 14:59:59,999 GMT+02:00",
"data")
ATMTransaction ("ATM", 1, 32, ATMNo:
32, Account:
64,
BancCode:
64, CardNo:
"card no", TAN1:
64, TAN2:
64, TimeStamp1:
"2013/09/05 14:59:59,999 GMT+02:00",
TimeStamp2:
"2013/09/05 14:59:59,999 GMT+02:00",
Amount:
0.0, Currency:
"currency")
ATMTransaction ("ATM", 1, 32)
AutoBackupCapacityMonitoringCapacityWarning (0,
"destination", 64, 64, 64, 32, 32, 32)
AutoBackupCapacityMonitoringFileAutoDeleted (0,
"destination", 64, 64, 64, 32, 32, 32, 64, "file name")
AutoBackupCapacityMonitoringOutOfDiskSpace (0,
"destination", 64, 64, 64, 32, 32, 32)
AutoBackupFileDone ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
90
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32,
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64, 32, "file name", 64)
AutoBackupFileDone ("schedule", "2013/09/05 14:59:59,999 GMT+02:00",
32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00",
"source", "destination", 64, 64, 32, "file name", 64)
AutoBackupFileProgress ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32,
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64, 32, "file name", 64)
AutoBackupFileProgress ("schedule", "2013/09/05 14:59:59,999 GMT+02:00",
32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00",
"source", "destination", 64, 64, 32, "file name", 64)
AutoBackupFileStarted ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32,
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64, 32, "file name")
AutoBackupFileStarted ("schedule", "2013/09/05 14:59:59,999 GMT+02:00",
32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00",
"source", "destination", 64, 64, 32, "file name")
AutoBackupOperationDone ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1,
32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64, OperationErrorCode:
32)
AutoBackupOperationDone ("schedule", "2013/09/05 14:59:59,999 GMT+02:00",
32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64)
AutoBackupOperationStarted ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32,
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64)
AutoBackupOperationStarted ("schedule",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32,
"2013/09/05 14:59:59,999 GMT+02:00", "source",
"destination", 64, 64)
AutoBackupScheduleDone ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1)
AutoBackupScheduleDone ("schedule", "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1)
AutoBackupScheduleStarted ("schedule", StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", 32, 1)
AutoBackupScheduleStarted ("schedule", "2013/09/05 14:59:59,999 GMT+02:00",
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
91


GEUTEBRUCK
32, 1)
AutoFocusOff (32)
AutoFocusOn (32)
BackupEvent (64, "event type", "destination", StartHintID:
64, StopHintID: 64, Subfolder:
"sub folder")
BackupEvent (64, "event type", "destination")
BarcodeData ("scanner", "2013/09/05 14:59:59,999 GMT+02:00",
"code")
BlockingFilterActivate ("filter")
BlockingFilterDeactivate ("filter")
CameraApplyProfile (32, "profile")
CameraBacklightCompensationMode (32, 0)
CameraClearPrePosText (32, 32)
CameraDayNightMode (32, 0)
CameraLightOff (32)
CameraLightOn (32)
CameraManualIrisOff (32)
CameraManualIrisOn (32)
CameraOff (32)
CameraOn (32)
CameraPumpOff (32)
CameraPumpOn (32)
CameraRAWOutput (32, "output")
CameraSelectCharMode (32, 32)
CameraSetPrePosText (32, 32)
CameraSpecFuncUOff (32)
CameraSpecFuncUOn (32)
CameraSpecFuncVOff (32)
CameraSpecFuncVOn (32)
CameraSpecFuncXOff (32)
CameraSpecFuncXOn (32)
CameraSpecFuncYOff (32)
CameraSpecFuncYOn (32)
CameraStopAll (32)
CameraTextOff (32)
CameraTextOn (32)
CameraTourStart (32, 32, "tour name")
CameraTourStop (32)
92
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
CameraVersionOff (32)
CameraVersionOn (32)
CameraWashOff (32)
CameraWashOn (32)
CancelExport ("00000000-0000-0000-0000-000000000000", 0)
CaseClosed ()
CaseOpened ()
ChangeADParameterSet (32, "AD parameter set")
ChangeCameraProfile ("hardware", "profile")
ChangeCPAParameterSet (32, "CPA parameter set")
ChangeGTectParameterSet (32, "GTect parameter set")
ChangeObtrackParameterSet (32, "OBTRACK parameter set")
ChangeVMDParameterSet (32, "VMD parameter set")
ChannelError (32, SensorType:
0, 0, 0, WindowsError:
32,
Description:
"description", XMLInfo:
"additional
info")
ChannelError (32, 0, 0)
ChannelInfo (32, SensorType:
0, 0, 0, Description:
"description", XMLInfo:
"additional info")
ChannelInfo (32, 0, 0)
ChannelLiveCheck (32, 0, "2013/09/05 14:59:59,999 GMT+02:00")
ChannelWarning (32, SensorType:
0, 0, 0, WindowsError:
32, Description:
"description", XMLInfo:
"additional
info")
ChannelWarning (32, 0, 0)
CPAMeasurement (32, 32)
CustomAction (64, "STRING parameter")
DatabaseRecordingInfoRing (0, 1, 1, 1, 0.0, 0.0, 0.0,
0.0, 0.0, 64, "2013/09/05 14:59:59,999 GMT+02:00",
RecordingDepth:
0.0, EstimatedRequiredCapacity:
64)
DatabaseRecordingInfoRing (0, 1, 1, 1, 0.0, 0.0, 0.0, 0.0,
0.0, 64, "2013/09/05 14:59:59,999 GMT+02:00")
DatabaseRecordingInfoTotal (1, 1, 1, 0.0, 0.0,
0.0, 0.0, 0.0, 64, 64, 64, OldestItem:
"2013/09/05 14:59:59,999 GMT+02:00",
RecordingDepth:
0.0, EstimatedRequiredCapacity:
64,
RequiredCapacityFactor:
0.0, RequiredCapacityAvailable:
1)
DatabaseRecordingInfoTotal (1, 1, 1, 0.0, 0.0, 0.0, 0.0,
0.0, 64, 64, 64)
DatabaseStarted (0, 64)
DefaultPosCallUp (32)
DefaultPosClear (32)
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
93


GEUTEBRUCK
DefaultPosSave (32)
DeviceFound ("device type", "device name", "serial ID")
DeviceNewFirmware ("device type", "device name", "serial
ID", "firmware serial")
DevicePluginError (32, "device type", SubType:
"device
subtype", "device name", "serial ID", 0, ErrorCode:
32, Description:
"description")
DevicePluginError (32, "device type", "device name", "serial
ID", 0)
DevicePluginState (32, "device type", SubType:
"device
subtype", "device name", "serial ID", 0, InternalState:
32, Description:
"description")
DevicePluginState (32, "device type", "device name", "serial
ID", 0)
DeviceReattached ("device type", "device name", "serial ID")
DeviceRemoved ("device type", "device name", "serial ID")
DigitalInput (32, 0)
EventBackupDone ("00000000-0000-0000-0000-000000000000",
"event type", 64, "destination", 64, 64,
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00",
OperationErrorCode:
32)
EventBackupDone ("00000000-0000-0000-0000-000000000000",
"event type", 64, "destination", 64, 64,
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00")
EventBackupFileDone ("00000000-0000-0000-0000-000000000000",
"event type", 64, "destination", 64, 64,
"2013/09/05 14:59:59,999 GMT+02:00", 32, "file name",
64)
EventBackupFileProgress ("00000000-0000-0000-0000-000000000000",
"event type", 64, "destination", 64, 64,
"2013/09/05 14:59:59,999 GMT+02:00", 32, "file name",
64)
EventBackupFileStarted ("00000000-0000-0000-0000-000000000000",
"event type", 64, "destination", 64, 64,
"2013/09/05 14:59:59,999 GMT+02:00", 32, "file name")
EventBackupStarted ("00000000-0000-0000-0000-000000000000",
"event type", 64, "destination", 64, 64,
"2013/09/05 14:59:59,999 GMT+02:00")
EventRecordingChanged (64, "event type")
EventStarted (64, "event type", ForeignKey:
64)
EventStarted (64, "event type")
EventStopped (64, "event type")
ExportFinished ("00000000-0000-0000-0000-000000000000", 0)
ExportProgress ("00000000-0000-0000-0000-000000000000", 32)
94
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
FastSpeedOff (32)
FastSpeedOn (32)
FillingPumpStatus ("terminal", "2013/09/05 14:59:59,999 GMT+02:00",
32, 0, Amount:
0.0, Price:
0.0, Details:
"details")
FillingPumpStatus ("terminal", "2013/09/05 14:59:59,999 GMT+02:00",
32, 0)
FocusFar (32, 32)
FocusNear (32, 32)
FocusStop (32)
FRCNotification (0, Param:
32, Description:
"description",
XMLInfo:
"additional info")
FRCNotification (0)
GEMOSalarm (64, 32, "GEMOS str")
GSCSVehicleAccessDenied (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory:
"company category", CompanyName:
"company name",
Reason:
"reason", TrafficLane:
"traffic lane",
Channel:
32, Direction:
0)
GSCSVehicleAccessDenied (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00")
GSCSVehicleAccessExpired (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory:
"company category", CompanyName:
"company name",
Reason:
"reason", TrafficLane:
"traffic lane",
Channel:
32, Direction:
0)
GSCSVehicleAccessExpired (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00")
GSCSVehicleAccessGranted (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory:
"company category", CompanyName:
"company name",
Reason:
"reason", TrafficLane:
"traffic lane",
Channel:
32, Direction:
0)
GSCSVehicleAccessGranted (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00")
GSCSVehicleAccessPending (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory:
"company category", CompanyName:
"company name",
Reason:
"reason", TrafficLane:
"traffic lane",
Channel:
32, Direction:
0)
GSCSVehicleAccessPending (32, "plate no.",
"2013/09/05 14:59:59,999 GMT+02:00")
GTectAnalyticsLiveCheck ()
GTectDualSensorAlarm (32, SterileZoneNumber:
32,
VirtualFenceNumber:
32, VMDGroup:
0, VMDZone:
32,
VMDCycle:
0, AlarmArea:
{ 0, 0, 0, 0 })
GTectDualSensorAlarm (32)
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
95


GEUTEBRUCK
GTectDualSensorAlarmFinished (32)
GTectSceneAlarm (32, 0)
GTectSceneAlarmFinished (32, 0)
GTectVMXAlarm (32, SterileZoneNumber:
32,
VirtualFenceNumber:
32, AlarmGroup:
32, TrackID: 32,
AlarmArea:
{ 0, 0, 0, 0 })
GTectVMXAlarm (32)
GTectVMXAlarmFinished (32)
IASSettingsChanged (32, 0)
ImageExportNotification ("user", "destination", 0,
"2013/09/05 14:59:59,999 GMT+02:00", TimeEnd:
"2013/09/05 14:59:59,999 GMT+02:00", "channels",
ClientHost:
"client host", ClientType:
0,
ClientAccount:
"client account")
ImageExportNotification ("user", "destination", 0,
"2013/09/05 14:59:59,999 GMT+02:00", "channels")
ImexCapacityFileAutoDeleted (0, "destination", 64, 64, 64,
32, 32, 32, 64, 32)
ImexCapacityOutOfDiskSpace (0, "destination", 64, 64, 64,
32, 32, 32)
ImexCapacityWarning (0, "destination", 64, 64, 64, 32, 32,
32)
ImexExportEventImage (64, "event type", Destination:
"destination", FilePath:
"file name")
ImexExportEventImage (64, "event type")
ImexExportImageFromDB (32, Destination:
"destination",
FilePath:
"file name", PictureTime:
"2013/09/05 14:59:59,999 GMT+02:00")
ImexExportImageFromDB (32)
ImexExportImageFromLiveStream (32, Destination:
"destination", FilePath:
"file name")
ImexExportImageFromLiveStream (32)
InitializeRemoteExport (32, "00000000-0000-0000-0000-000000000000")
InterfaceRawAnswer ("interface", "2013/09/05 14:59:59,999 GMT+02:00",
"answer")
InterfaceRawData ("interface", "2013/09/05 14:59:59,999 GMT+02:00",
"data")
IOI43ResetMainboard ()
IOI43Temperature ("ID", 32)
IOI43WDActivate ()
IOI43WDDeactivate ()
IOI43WDTrigger ()
IPCameraRawCommand ("url", User:
"user", Password:
"password", POST: "post")
96
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
IPCameraRawCommand ("url")
IPCamFailoverNotification ("primary server", "secondary
server", 32, 32, CameraParameters:
"camera
parameters")
IPCamFailoverNotification ("primary server", "secondary
server", 32, 32)
IPCamFailoverRestore ("primary server", "secondary server",
32, 32, CameraParameters:
"camera parameters")
IPCamFailoverRestore ("primary server", "secondary server",
32, 32)
IPSwitchOperation (0, "port no", Param:
32)
IPSwitchOperation (0, "port no")
IrisClose (32)
IrisOpen (32)
IrisStop (32)
KeyPressed (0)
KeyReleased (0)
KillAllEvents ()
KillEvent ("event type")
KillEventByID (64)
LenelAccessEvent (ID: 0, Panel:
"panel", Device:
"device",
SecondaryDevice:
32, CardNumber:
64, AccessResult:
0, Type:
0, SubType:
32, "description", SerialNumber:
32, TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
AreaEnteredID: 32, AreaExitedID: 32, AssetID: "asset
ID", CardholderEntered:
1, Duress:
1, ElevatorFloor:
32, FacilityCode:
32, IsReadableCard:
1, IssueCode:
32, CommServerHostName:
"server host", EventText:
"event text")
LenelAccessEvent ("description")
LenelFireEvent (ID: 0, Panel:
"panel", Device:
"device",
SecondaryDevice:
32, TroubleCode:
32, Type:
0,
SubType:
32, "description", SerialNumber:
32,
TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
CommServerHostName:
"server host", EventText:
"event
text")
LenelFireEvent ("description")
LenelIntercomEvent (ID: 0, Panel:
"panel",
Device:
"device", SecondaryDevice:
32,
IntercomData:
32, LineNumber:
32, Type:
0,
SubType:
32, "description", SerialNumber:
32,
TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
CommServerHostName:
"server host", EventText:
"event
text")
LenelIntercomEvent ("description")
LenelRawData ("2013/09/05 14:59:59,999 GMT+02:00", "data")
LenelRefreshNames ()
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
97


GEUTEBRUCK
LenelSecurityEvent (ID: 0, Panel:
"panel", Device:
"device", SecondaryDevice:
32, Type:
0,
SubType:
32, "description", SerialNumber:
32,
TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
CommServerHostName:
"server host", EventText:
"event
text")
LenelSecurityEvent ("description")
LenelVideoEvent (ID: 0, Panel:
"panel", Device:
"device",
SecondaryDevice:
32, Channel:
32, Type:
0,
SubType:
32, "description", SerialNumber:
32,
TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
StartTime:
"2013/09/05 14:59:59,999 GMT+02:00",
EndTime:
"2013/09/05 14:59:59,999 GMT+02:00",
CommServerHostName:
"server host", EventText:
"event
text")
LenelVideoEvent ("description")
LiveCheck (64, "2013/09/05 14:59:59,999 GMT+02:00")
LogBarcodeData ("barcode", Hash:
64, Scanner:
"scanner
name", AreaID: 64, AreaName:
"area name", Channel:
32, TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
Order:
"order number", Shipment:
"shipment number",
Item:
"item number")
LogBarcodeData ("barcode")
LogBarcodeDataLPS ("barcode", Hash:
64, Scanner:
"scanner
name", AreaID: 64, AreaName:
"area name", Channel:
32, TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
X: 0.0, Y: 0.0, Z: 0.0, LpsTagID: 32, LpsStatus:
0,
LpsCellID: 32, LpsAreaID: 32, UserParam:
32, Order:
"order number", Shipment:
"shipment number", Item:
"item number")
LogBarcodeDataLPS ("barcode")
LogNPRRecognition ("plate no.", Hash:
64,
Country:
"country", Channel:
32, TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00", Restriction:
0,
Category:
"category")
LogNPRRecognition ("plate no.")
LPSPositionData (32, ScannerID: "scanner ID", 64, 64, Z:
64, Latitude:
0.0, Longitude:
0.0, 32, CellID: 32, 0,
TimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00", Data:
"data", AreaName:
"area name")
LPSPositionData (32, 64, 64, 32, 0)
LPSQueryPosition (32, ScannerID: "scanner ID", Data:
"data")
LPSQueryPosition (32)
MakeCPAReferenceImage (32)
MediaChannelSetupInfo (32, "2013/09/05 14:59:59,999 GMT+02:00",
"parameter")
MoveToAbsolutePosition (32, 0.0, 0.0, 0.0, 0.0)
MoveToBySpeed (32, 0.0, 0.0)
98
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
MoveToRelativePosition (32, 0.0, 0.0, 0.0, 0.0)
NPRRawData ("plate no.", "country", 32,
"2013/09/05 14:59:59,999 GMT+02:00", { 0, 0, 0, 0 },
32, 32, 32, 32, 32, 32, 1, 32, 32, 32, 32, "type")
NPRRecognition ("plate no.", "country", 32,
"2013/09/05 14:59:59,999 GMT+02:00", { 0, 0, 0, 0 },
0, "category", 32, 32, 32, "type", 32)
ObtrackChannelCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00",
ResetTimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00")
ObtrackChannelCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00")
ObtrackChannelCounterThreshold (32, 0, 64, 0,
"2013/09/05 14:59:59,999 GMT+02:00")
ObtrackChannelSetCounter (32, 0, 64, "2013/09/05 14:59:59,999 GMT+02:00")
ObtrackFrameRawData ("2013/09/05 14:59:59,999 GMT+02:00",
32, 32, 32)
ObtrackGroupCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00",
ResetTimeStamp:
"2013/09/05 14:59:59,999 GMT+02:00",
GroupName:
"group name")
ObtrackGroupCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00")
ObtrackGroupCounterThreshold (32, 0, 64, 0,
"2013/09/05 14:59:59,999 GMT+02:00", GroupName:
"group
name")
ObtrackGroupCounterThreshold (32, 0, 64, 0,
"2013/09/05 14:59:59,999 GMT+02:00")
ObtrackGroupSetCounter (32, 0, 64, "2013/09/05 14:59:59,999 GMT+02:00",
GroupName:
"group name")
ObtrackGroupSetCounter (32, 0, 64, "2013/09/05 14:59:59,999 GMT+02:00")
ObtrackObjectRawData ("2013/09/05 14:59:59,999 GMT+02:00",
32, 32, 32, 0, 0, Confidence:
32, Position:
{ 0, 0,
0, 0 }, Speed:
0.0, Duration:
32, Direction:
32,
Size:
0.0, ObjectWidth:
0.0, ObjectHeight:
0.0,
ProcessSize:
0, GscNetName:
"GSC net name")
ObtrackObjectRawData ("2013/09/05 14:59:59,999 GMT+02:00",
32, 32, 32, 0, 0)
ObtrackTunnelAlarm (32, "2013/09/05 14:59:59,999 GMT+02:00",
0, 32, 32, ObjectArea:
{ 0, 0, 0, 0 })
ObtrackTunnelAlarm (32, "2013/09/05 14:59:59,999 GMT+02:00",
0, 32, 32)
PanAuto (32, 32)
PanLeft (32, 32)
PanRight (32, 32)
PanStop (32)
POSData ("POS", "2013/09/05 14:59:59,999 GMT+02:00",
Article:
"article", Price:
0.0, Units:
32,
PricePerUnit:
0.0, Line1:
"line 1", Line2:
"line
2", Line3:
"line 3", Line4:
"line 4", Line5:
"line
5")
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
99


GEUTEBRUCK
POSData ("POS", "2013/09/05 14:59:59,999 GMT+02:00")
POSStatus ("POS", "2013/09/05 14:59:59,999 GMT+02:00", 0,
Details:
"details")
POSStatus ("POS", "2013/09/05 14:59:59,999 GMT+02:00", 0)
PPDeviceAlarm ("interface id", 32, 0, 0)
PPDeviceInput ("interface id", 32, 32, 0)
PPDeviceOffline ("interface id", 32)
PPDeviceOnline ("interface id", 32)
PPInterfaceOffline ("interface id")
PPInterfaceOnline ("interface id")
PPQueryInterface ("interface id")
PPSetDeviceOutput ("interface id", 32, 32, 0)
PPSubcellAlarm ("interface id", 32, 0, 32, 0)
PPZoneAlarm ("zone id", "interface id", 32, Cable:
0,
Subcell:
32, 0)
PPZoneAlarm ("zone id", "interface id", 32, 0)
PrePosCallUp (32, 32)
PrePosClear (32, 32)
PrePosSave (32, 32)
RedundantPowerFailure ()
RedundantPowerOk ()
ResetMainboard ()
SafebagClose (32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "safebag
no.", "safebag info", 0, Debit:
0.0, Total:
0.0,
Difference:
0.0, HasDifference:
1, Notes:
"notes",
Coins:
"coins", Cheques:
"cheques")
SafebagClose (32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "safebag no.",
"safebag info", 0)
SafebagData (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0, Debit:
0.0, Total:
0.0, Difference:
0.0, HasDifference:
1, Notes:
"notes", Coins:
"coins", Cheques:
"cheques")
SafebagData (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0)
SafebagOpen (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0)
SafebagPassingOfRiskData (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0, 32, 32, TourNumber:
32, TargetWorkingPlace:
"target working place",
PassingOfRiskType:
"passing of risk type")
SafebagPassingOfRiskData (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0, 32, 32)
100
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
SafebagPassingOfRiskStart (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0, 32, 32, TourNumber:
32, TargetWorkingPlace:
"target working place",
PassingOfRiskType:
"passing of risk type")
SafebagPassingOfRiskStart (32, "2013/09/05 14:59:59,999 GMT+02:00",
"safebag no.", "safebag info", 0, 32, 32)
SafebagPassingOfRiskStop (32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "safebag
no.", "safebag info", 0, 32, 32, TourNumber:
32,
TargetWorkingPlace:
"target working place",
PassingOfRiskType:
"passing of risk type")
SafebagPassingOfRiskStop (32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "safebag no.",
"safebag info", 0, 32, 32)
SceneStoreModification (32, "00000000-0000-0000-0000-000000000000",
"scene store name", "2013/09/05 14:59:59,999 GMT+02:00",
0, "user", ClientHost:
"client host", ClientType:
0,
ClientAccount:
"client account")
SceneStoreModification (32, "00000000-0000-0000-0000-000000000000",
"scene store name", "2013/09/05 14:59:59,999 GMT+02:00",
0, "user")
SensorAlarmFinished (32, 0)
SensorAudioAlarm (32)
SensorInhibitAlarmFinished (32, 0)
SensorInhibitVideoAlarm (32, 0, ADArea:
0, ADCell:
32,
VMDGroup:
0, VMDZone:
32, VMDCycle:
0, AlarmArea:
{
0, 0, 0, 0 }, ObjectClass:
0)
SensorInhibitVideoAlarm (32, 0)
SensorVideoAlarm (32, 0, ADArea:
0, ADCell:
32, VMDGroup:
0, VMDZone:
32, VMDCycle:
0, AlarmArea:
{ 0, 0, 0, 0
}, ObjectClass:
0)
SensorVideoAlarm (32, 0)
SetCameraText (32, "text")
SetClientVCA (32, 0, 1)
SetClock ("2013/09/05 14:59:59,999 GMT+02:00")
SetDigitalOutput (32, 0)
SetExportMarker (32, 0)
SetLED (0, 0)
SetLEDBlink (0, 32, 32)
SetSystemTime ("2013/09/05 14:59:59,999 GMT+02:00")
SetTestPictureMode (32, 1)
SetupChanged ("user name", "remote host",
"2013/09/05 14:59:59,999 GMT+02:00", 0, "resource ID",
0, Details:
"details", ClientHost:
"client host",
ClientType:
0, ClientAccount:
"client account")
SetupChanged ("user name", "remote host",
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
101


GEUTEBRUCK
"2013/09/05 14:59:59,999 GMT+02:00", 0, "resource ID",
0)
SetupUploadProgress (User1:
"first user", User2:
"second user", Host:
"remote host", 32,
"2013/09/05 14:59:59,999 GMT+02:00")
SetupUploadProgress (32, "2013/09/05 14:59:59,999 GMT+02:00")
SetWatchdog (32)
SkidataControl ("interface", 0)
SkidataDeviceEvent ("interface", 32, 32)
SkidataEntry ("interface", 0, "transaction", 32, 32)
SkidataExit ("interface", 0, "transaction", 32, 32)
SkidataTransaction ("interface", 0, "transaction", 32, 32)
SMRPViewerCleared ()
SMRPViewerConnected ("server", 32)
SMTPMailSend ("subject", "to", "cc", "body", Channel:
32)
SMTPMailSend ("subject", "to", "cc", "body")
StartAutoBackup ("schedule")
StartEvent ("event type", ForeignKey:
64)
StartEvent ("event type")
StartRemoteExport ("00000000-0000-0000-0000-000000000000",
"00000000-0000-0000-0000-000000000000", 0,
32, "2013/09/05 14:59:59,999 GMT+02:00",
"2013/09/05 14:59:59,999 GMT+02:00", "job ID")
StartSceneStore ("00000000-0000-0000-0000-000000000000",
"cut-list", 64, 64)
StopAllEvents ()
StopEvent ("event type")
StopEventByID (64)
SystemError (0, 0, WindowsError:
32, Description:
"description", XMLInfo:
"additional info")
SystemError (0, 0)
SystemInfo (0, 0, Description:
"description", XMLInfo:
"additional info")
SystemInfo (0, 0)
SystemSettingsChanged (1, User1:
"first user",
User2:
"second user", Host:
"remote host",
1, TimeRange:
"current time range", 1,
"2013/09/05 14:59:59,999 GMT+02:00")
SystemSettingsChanged (1, 1, 1, "2013/09/05 14:59:59,999 GMT+02:00")
SystemStarted ("2013/09/05 14:59:59,999 GMT+02:00")
SystemTerminating ("2013/09/05 14:59:59,999 GMT+02:00", 1)
SystemWarning (0, 0, WindowsError:
32, Description:
"description", XMLInfo:
"additional info")
102
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
SystemWarning (0, 0)
Temperature (0, "ID", 32)
TerminalArticleData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00",
32, PumpNo:
32, 1, Amount:
0.0, Price:
0.0, Details:
"details")
TerminalArticleData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00",
32, 1)
TerminalPaymentData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00",
32, PumpNo:
32, 1, Amount:
0.0, Price:
0.0, Details:
"details")
TerminalPaymentData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00",
32, 1)
TiltDown (32, 32)
TiltStop (32)
TiltUp (32, 32)
TransferBinaryBuffer ("00000000-0000-0000-0000-000000000000",
"parameter")
TransferBinaryChannelBuffer (32, "00000000-0000-0000-0000-000000000000",
"parameter")
UserLogin ("first user", User2:
"second user", "remote
host", ClientHost:
"client host", ClientType:
0,
ClientAccount:
"client account")
UserLogin ("first user", "remote host")
UserLoginFailed ("first user", User2:
"second user",
"remote host", 0, ClientHost:
"client host",
ClientType:
0, ClientAccount:
"client account")
UserLoginFailed ("first user", "remote host", 0)
UserLogout ("first user", User2:
"second user", "remote
host", ClientHost:
"client host", ClientType:
0,
ClientAccount:
"client account")
UserLogout ("first user", "remote host")
VCAlarmQueueConfirm (32, 0)
VCAlarmQueueConfirmByInstance (32, 64)
VCAlarmQueueConfirmByType (32, "event type", 0)
VCAlarmQueueNotification (32, 0, 64, "event type",
ClientHost:
"client host", ClientType:
0,
ClientAccount:
"client account")
VCAlarmQueueNotification (32, 0, 64, "event type")
VCAlarmQueueRemove (32, 0)
VCAlarmQueueRemoveByInstance (32, 64)
VCAlarmQueueRemoveByType (32, "event type", 0)
VCAlarmQueueSelect (32, 0)
VCAlarmQueueSelectByInstance (32, 64)
VCAlarmQueueSelectByType (32, "event type", 0)
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
103


GEUTEBRUCK
VCASetArmed (32, 0, 1)
VCAStatusAnswer (32, 0, 1)
VCAStatusRequest (32, 0)
VCChangeSceneByName (32, "scene")
VCClearSceneByName (32, "scene")
VCFullMode (32, 1, 1)
VCSceneChanged (32, "scene")
VCSetAudioLevel (32, 32)
VCShowViewerText (32, 1)
VCStretchMode (32, 1)
VideoContrastDetected (32)
VideoContrastFailed (32)
VideoSetImageBrightness (32, 0, 32)
VideoSetImageContrast (32, 0, 32)
VideoSetImageSaturation (32, 0, 32)
VideoSourceChanged (32, 0, 0, 0)
VideoSyncDetected (32)
VideoSyncFailed (32)
ViewerChangeScene (32)
ViewerClear (32)
ViewerCleared (32, ClientHost:
"client host", ClientType:
0, ClientAccount:
"client account")
ViewerCleared (32)
ViewerClearScene (32)
ViewerClearTextOutput (32)
ViewerConnect (32, 32, 0)
ViewerConnected (32, 32, 0, ClientHost:
"client host",
ClientType:
0, ClientAccount:
"client account")
ViewerConnected (32, 32, 0)
ViewerConnectLive (32, 32)
ViewerExportPicture (32, "file path")
ViewerJumpByTime (32, 32, 0, 32)
ViewerMaximize (32, 1)
ViewerPlayFromTime (32, 32, 0, "2013/09/05 14:59:59,999 GMT+02:00")
ViewerPlayModeChanged (32, 32, 0, ChannelTime:
"2013/09/05 14:59:59,999 GMT+02:00", ClientHost:
"client host", ClientType:
0, ClientAccount:
"client
account")
ViewerPlayModeChanged (32, 32, 0)
ViewerPrintPicture (32)
104
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
ViewerSelect (32)
ViewerSelectionChanged (32, 32, 0, ClientHost:
"client
host", ClientType:
0, ClientAccount:
"client
account")
ViewerSelectionChanged (32, 32, 0)
ViewerSetPlayMode (32, 0, 32)
ViewerShowAlarmByInstance (32, 64, 0)
ViewerShowAlarmByKey (32, 64, 0)
ViewerShowAlarmByType (32, "alarm type", ForeignKey:
64, 0)
ViewerShowAlarmByType (32, "alarm type", 0)
ViewerSyncAudioAndVideo (32, 1)
ViewerTextOutput (32, "text string")
WatchdogActivate ()
WatchdogDeactivate ()
WatchdogTrigger ()
ZoomIn (32, 32)
ZoomOut (32, 32)
ZoomStop (32)
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
105


GEUTEBRUCK
106
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
Index
Action classes, 15
ATM/ACS, 16
Audio control, 18
Backup actions, 19
Camera control, 26
Cash management actions, 35
Device information, 38
Digital contacts, 40
Imex, 42
LPS, 44
Lenel, 45
Supply chain security, 56
POS, 49
Perimeter protection, 51
Remote export, 53
SKIDATA, 55
System actions, 59
Video control, 68
Viewer notiﬁcations, 87
Viewer actions, 81
Actions by name
ABC connect, 18
ABC disconnect, 18
ABC play ﬁle, 19
Abort all auto backups, 19
Abort auto backup, 19
ACS access denied, 16
ACS access granted, 17
ACS raw answer, 17
ACS raw data, 17
Activate external process, 68
ATM raw answer, 17
ATM raw data, 17
ATM transaction, 18
Auto
backup
capacity
ﬁle
auto
deleted, 19
Auto backup capacity out of disk
space, 20
Auto backup capacity warning, 20
Auto backup ﬁle done, 21
Auto backup ﬁle progress, 21
Auto backup ﬁle started, 22
Auto backup operation done, 22
Auto backup operation started, 23
Auto backup schedule done, 23
Auto backup schedule started, 23
Auto focus off, 26
Auto focus on, 26
Backup event, 24
Barcode data, 49
Blocking ﬁlter activate, 59
Blocking ﬁlter deactivate, 59
Camera apply proﬁle, 26
Camera
backlight
compensation
mode, 26
Camera clear preset text, 27
Camera day/night mode, 27
Camera light off, 27
Camera light on, 27
Camera manual iris off, 27
Camera manual iris on, 27
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
107


GEUTEBRUCK
Camera off, 27
Camera on, 28
Camera pump off, 28
Camera pump on, 28
Camera RAW output, 26
Camera select char mode, 28
Camera set preset text, 28
Camera spec func U off, 28
Camera spec func U on, 28
Camera spec func V off, 29
Camera spec func V on, 29
Camera spec func X off, 29
Camera spec func X on, 29
Camera spec func Y off, 29
Camera spec func Y on, 29
Camera stop all, 29
Camera text off, 30
Camera text on, 30
Camera tour start, 30
Camera tour stop, 30
Camera version off, 30
Camera version on, 30
Camera wash-wipe off, 30
Camera wash-wipe on, 31
Cancel export, 53
Case has been closed, 40
Case has been opened, 40
Change AD parameter set, 68
Change camera proﬁle, 69
Change CPA parameter set, 69
Change GTectVMX parameter set,
69
Change OBTRACK parameter set,
69
Change VMD parameter set, 69
Channel error, 69
Channel info, 70
Channel live check, 70
Channel warning, 70
Clear default position, 31
Clear preset position, 31
CPA measurement, 68
Custom action, 59
Database recording info per ring,
60
Database recording info total, 60
Database started, 61
Device found, 38
Device plugin error, 38
Device plugin state, 39
Device reattached, 39
Device removed, 39
Digital input, 40
Enable client VCA, 71
Event backup done, 24
Event backup ﬁle done, 24
Event backup ﬁle progress, 25
Event backup ﬁle started, 25
Event backup started, 25
Event recording changed, 61
Event started, 61
Event stopped, 61
Export ﬁnished, 53
Export progress, 54
Fast speed off, 31
Fast speed on, 31
Filling pump status, 49
Focus far, 31
Focus near, 31
Focus stop, 32
108
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
FRC notiﬁcation, 61
G-Tect analytics live check, 71
G-Tect scene alarm, 71
G-Tect scene alarm ﬁnished, 71
G-Tect/Dual sensor alarm, 71
G-Tect/Dual sensor alarm ﬁnished,
72
G-Tect/VMX alarm, 72
G-Tect/VMX alarm ﬁnished, 72
GEMOS alarm, 62
GSCS vehicle access denied, 56
GSCS vehicle access expired, 56
GSCS vehicle access granted, 57
GSCS vehicle access pending, 57
IAS settings changed, 72
Image export notiﬁcation, 87
Imex capacity ﬁle auto deleted, 43
Imex capacity out of disk space., 43
Imex capacity warning, 43
Imex export event image, 44
Imex export image from DB, 44
Imex export image from live stream,
44
Initialize remote export, 54
Interface raw answer, 49
Interface raw data, 49
IOI43 reset mainboard, 40
IOI43 temperature notiﬁcation, 40
IOI43 watchdog activate, 40
IOI43 watchdog deactivate, 41
IOI43 watchdog trigger, 41
IP camera failover notiﬁcation, 72
IP camera failover restore, 73
IP camera raw command, 73
IP switch operation, 62
Iris close, 32
Iris open, 32
Iris stop, 32
Key pressed, 41
Key released, 41
Kill all events, 62
Kill event, 62
Kill event by instance, 62
Lenel access event, 45
Lenel ﬁre event, 46
Lenel intercom event, 47
Lenel raw data, 47
Lenel refresh names, 47
Lenel security event, 48
Lenel video event, 48
Live check, 62
Log barcode data, 58
Log barcode data LPS, 58
Log NPR recognition, 58
LPS position data, 44
LPS query position, 45
Make CPA reference image, 73
Media channel setup, 73
Move by speed, 32
Move to absolute position, 32
Move to default position, 33
Move to preset position, 33
Move to relative position, 33
New ﬁrmware received, 39
NPR raw data, 74
NPR recognition, 74
OBTRACK channel counter, 75
OBTRACK channel counter thresh-
old, 75
OBTRACK channel set counter, 75
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
109


GEUTEBRUCK
OBTRACK frame raw data, 75
OBTRACK group counter, 76
OBTRACK group counter thresh-
old, 76
OBTRACK group set counter, 76
OBTRACK object raw data, 77
OBTRACK tunnel alarm, 77
Pan auto, 33
Pan left, 33
Pan right, 33
Pan stop, 34
POS data, 50
POS status, 50
PP device alarm, 51
PP device input, 51
PP device ofﬂine, 52
PP device online, 52
PP interface ofﬂine, 52
PP interface online, 52
PP query interface, 52
PP set device output, 52
PP subcell alarm, 53
PP zone alarm, 53
Redundant power failure, 63
Redundant power ok, 63
Reset mainboard, 41
Safebag close, 35
Safebag data, 36
Safebag open, 36
Safebag passing of risk data, 37
Safebag passing of risk start, 37
Safebag passing of risk stop, 37
Save default position, 34
Save preset position, 34
Scene store modiﬁcation, 88
Sensor alarm ﬁnished, 77
Sensor audio alarm, 19
Sensor inhibit alarm ﬁnished, 78
Sensor inhibit video alarm, 78
Sensor video alarm, 78
Set camera text, 34
Set clock, 63
Set digital output, 41
Set export marker, 54
Set system LED, 41
Set system LED to blink, 42
Set system time, 79
Set test picture mode, 79
Set watchdog, 64
Setup changed, 64
Setup upload progress, 64
SKIDATA control, 55
SKIDATA device event, 55
SKIDATA entry, 55
SKIDATA exit, 55
SKIDATA transaction, 56
SMRP viewer cleared, 63
SMRP viewer connected, 63
SMTP mail, 63
Start auto backup, 26
Start event, 64
Start remote export, 54
Start scene store, 54
Stop all events, 65
Stop event, 65
Stop event by instance, 65
System error, 65
System info, 65
System settings changed, 66
110
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
System started, 66
System terminating, 66
System warning, 66
Temperature notiﬁcation, 42
Terminal article data, 50
Terminal payment data, 51
Tilt down, 34
Tilt stop, 34
Tilt up, 35
Transfer binary buffer, 67
Transfer binary channel buffer, 67
User login, 67
User login failed, 67
User logout, 68
VC alarm queue conﬁrm, 81
VC alarm queue conﬁrm by in-
stance, 81
VC alarm queue conﬁrm by type,
81
VC alarm queue notiﬁcation, 88
VC alarm queue remove, 82
VC alarm queue remove by in-
stance, 82
VC alarm queue remove by type,
82
VC alarm queue select, 82
VC alarm queue select by instance,
82
VC alarm queue select by type, 82
VC change scene by name, 83
VC clear scene by name, 83
VC full mode, 83
VC scene changed, 88
VC set audio level, 83
VC show viewer text, 83
VC stretch mode, 83
VCA set armed, 79
VCA status answer, 79
VCA status request, 79
Video contrast detected, 79
Video contrast failed, 80
Video set image brightness, 80
Video set image contrast, 80
Video set image saturation, 80
Video source has changed, 80
Video sync detected, 81
Video sync failed, 81
Viewer change scene, 84
Viewer change sync audio/video,
84
Viewer clear, 84
Viewer clear scene, 84
Viewer clear text output, 84
Viewer cleared, 88
Viewer connect, 84
Viewer connect live, 85
Viewer connected, 89
Viewer export picture, 85
Viewer jump by time, 85
Viewer maximize, 85
Viewer play from time, 85
Viewer play mode changed, 89
Viewer print picture, 86
Viewer select, 86
Viewer selection changed, 89
Viewer set play mode, 86
Viewer show alarm by instance, 86
Viewer show alarm by key, 86
Viewer show alarm by type, 87
Viewer text output, 87
Watchdog activate, 42
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
111


GEUTEBRUCK
Watchdog deactivate, 42
Watchdog trigger, 42
Zoom in, 35
Zoom out, 35
Zoom stop, 35
Actions by shortcut
ABCConnect, 18
ABCDisconnect, 18
ABCPlayFile, 19
AbortAllAutoBackups, 19
AbortAutoBackup, 19
ACSAccessDenied, 16
ACSAccessGranted, 17
ACSRawAnswer, 17
ACSRawData, 17
ActivateExternalProcess, 68
ATMRawAnswer, 17
ATMRawData, 17
ATMTransaction, 18
AutoBackupCapacityMonitoringCa-
pacityWarning, 20
AutoBackupCapacityMonitoring-
FileAutoDeleted, 19
AutoBackupCapacityMoni-
toringOutOfDiskSpace, 20
AutoBackupFileDone, 21
AutoBackupFileProgress, 21
AutoBackupFileStarted, 22
AutoBackupOperationDone, 22
AutoBackupOperationStarted, 23
AutoBackupScheduleDone, 23
AutoBackupScheduleStarted, 23
AutoFocusOff, 26
AutoFocusOn, 26
BackupEvent, 24
BarcodeData, 49
BlockingFilterActivate, 59
BlockingFilterDeactivate, 59
CameraApplyProﬁle, 26
CameraBacklightCompensation-
Mode, 26
CameraClearPrePosText, 27
CameraDayNightMode, 27
CameraLightOff, 27
CameraLightOn, 27
CameraManualIrisOff, 27
CameraManualIrisOn, 27
CameraOff, 27
CameraOn, 28
CameraPumpOff, 28
CameraPumpOn, 28
CameraRAWOutput, 26
CameraSelectCharMode, 28
CameraSetPrePosText, 28
CameraSpecFuncUOff, 28
CameraSpecFuncUOn, 28
CameraSpecFuncVOff, 29
CameraSpecFuncVOn, 29
CameraSpecFuncXOff, 29
CameraSpecFuncXOn, 29
CameraSpecFuncYOff, 29
CameraSpecFuncYOn, 29
CameraStopAll, 29
CameraTextOff, 30
CameraTextOn, 30
CameraTourStart, 30
CameraTourStop, 30
CameraVersionOff, 30
CameraVersionOn, 30
CameraWashOff, 30
CameraWashOn, 31
112
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
CancelExport, 53
CaseClosed, 40
CaseOpened, 40
ChangeADParameterSet, 68
ChangeCameraProﬁle, 69
ChangeCPAParameterSet, 69
ChangeGTectParameterSet, 69
ChangeObtrackParameterSet, 69
ChangeVMDParameterSet, 69
ChannelError, 69
ChannelInfo, 70
ChannelLiveCheck, 70
ChannelWarning, 70
CPAMeasurement, 68
CustomAction, 59
DatabaseRecordingInfoRing, 60
DatabaseRecordingInfoTotal, 60
DatabaseStarted, 61
DefaultPosCallUp, 33
DefaultPosClear, 31
DefaultPosSave, 34
DeviceFound, 38
DeviceNewFirmware, 39
DevicePluginError, 38
DevicePluginState, 39
DeviceReattached, 39
DeviceRemoved, 39
DigitalInput, 40
EventBackupDone, 24
EventBackupFileDone, 24
EventBackupFileProgress, 25
EventBackupFileStarted, 25
EventBackupStarted, 25
EventRecordingChanged, 61
EventStarted, 61
EventStopped, 61
ExportFinished, 53
ExportProgress, 54
FastSpeedOff, 31
FastSpeedOn, 31
FillingPumpStatus, 49
FocusFar, 31
FocusNear, 31
FocusStop, 32
FRCNotiﬁcation, 61
GEMOSalarm, 62
GSCSVehicleAccessDenied, 56
GSCSVehicleAccessExpired, 56
GSCSVehicleAccessGranted, 57
GSCSVehicleAccessPending, 57
GTectAnalyticsLiveCheck, 71
GTectDualSensorAlarm, 71
GTectDualSensorAlarmFinished,
72
GTectSceneAlarm, 71
GTectSceneAlarmFinished, 71
GTectVMXAlarm, 72
GTectVMXAlarmFinished, 72
IASSettingsChanged, 72
ImageExportNotiﬁcation, 87
ImexCapacityFileAutoDeleted, 43
ImexCapacityOutOfDiskSpace, 43
ImexCapacityWarning, 43
ImexExportEventImage, 44
ImexExportImageFromDB, 44
ImexExportImageFromLiveStream,
44
InitializeRemoteExport, 54
InterfaceRawAnswer, 49
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
113


GEUTEBRUCK
InterfaceRawData, 49
IOI43ResetMainboard, 40
IOI43Temperature, 40
IOI43WDActivate, 40
IOI43WDDeactivate, 41
IOI43WDTrigger, 41
IPCameraRawCommand, 73
IPCamFailoverNotiﬁcation, 72
IPCamFailoverRestore, 73
IPSwitchOperation, 62
IrisClose, 32
IrisOpen, 32
IrisStop, 32
KeyPressed, 41
KeyReleased, 41
KillAllEvents, 62
KillEvent, 62
KillEventByID, 62
LenelAccessEvent, 45
LenelFireEvent, 46
LenelIntercomEvent, 47
LenelRawData, 47
LenelRefreshNames, 47
LenelSecurityEvent, 48
LenelVideoEvent, 48
LiveCheck, 62
LogBarcodeData, 58
LogBarcodeDataLPS, 58
LogNPRRecognition, 58
LPSPositionData, 44
LPSQueryPosition, 45
MakeCPAReferenceImage, 73
MediaChannelSetupInfo, 73
MoveToAbsolutePosition, 32
MoveToBySpeed, 32
MoveToRelativePosition, 33
NPRRawData, 74
NPRRecognition, 74
ObtrackChannelCounter, 75
ObtrackChannelCounterThreshold,
75
ObtrackChannelSetCounter, 75
ObtrackFrameRawData, 75
ObtrackGroupCounter, 76
ObtrackGroupCounterThreshold,
76
ObtrackGroupSetCounter, 76
ObtrackObjectRawData, 77
ObtrackTunnelAlarm, 77
PanAuto, 33
PanLeft, 33
PanRight, 33
PanStop, 34
POSData, 50
POSStatus, 50
PPDeviceAlarm, 51
PPDeviceInput, 51
PPDeviceOfﬂine, 52
PPDeviceOnline, 52
PPInterfaceOfﬂine, 52
PPInterfaceOnline, 52
PPQueryInterface, 52
PPSetDeviceOutput, 52
PPSubcellAlarm, 53
PPZoneAlarm, 53
PrePosCallUp, 33
PrePosClear, 31
PrePosSave, 34
RedundantPowerFailure, 63
114
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013


GEUTEBRUCK
RedundantPowerOk, 63
ResetMainboard, 41
SafebagClose, 35
SafebagData, 36
SafebagOpen, 36
SafebagPassingOfRiskData, 37
SafebagPassingOfRiskStart, 37
SafebagPassingOfRiskStop, 37
SceneStoreModiﬁcation, 88
SensorAlarmFinished, 77
SensorAudioAlarm, 19
SensorInhibitAlarmFinished, 78
SensorInhibitVideoAlarm, 78
SensorVideoAlarm, 78
SetCameraText, 34
SetClientVCA, 71
SetClock, 63
SetDigitalOutput, 41
SetExportMarker, 54
SetLED, 41
SetLEDBlink, 42
SetSystemTime, 79
SetTestPictureMode, 79
SetupChanged, 64
SetupUploadProgress, 64
SetWatchdog, 64
SkidataControl, 55
SkidataDeviceEvent, 55
SkidataEntry, 55
SkidataExit, 55
SkidataTransaction, 56
SMRPViewerCleared, 63
SMRPViewerConnected, 63
SMTPMailSend, 63
StartAutoBackup, 26
StartEvent, 64
StartRemoteExport, 54
StartSceneStore, 54
StopAllEvents, 65
StopEvent, 65
StopEventByID, 65
SystemError, 65
SystemInfo, 65
SystemSettingsChanged, 66
SystemStarted, 66
SystemTerminating, 66
SystemWarning, 66
Temperature, 42
TerminalArticleData, 50
TerminalPaymentData, 51
TiltDown, 34
TiltStop, 34
TiltUp, 35
TransferBinaryBuffer, 67
TransferBinaryChannelBuffer, 67
UserLogin, 67
UserLoginFailed, 67
UserLogout, 68
VCAlarmQueueConﬁrm, 81
VCAlarmQueueConﬁrmByIn-
stance, 81
VCAlarmQueueConﬁrmByType, 81
VCAlarmQueueNotiﬁcation, 88
VCAlarmQueueRemove, 82
VCAlarmQueueRemoveByIn-
stance, 82
VCAlarmQueueRemoveByType,
82
VCAlarmQueueSelect, 82
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013
115


GEUTEBRUCK
VCAlarmQueueSelectByInstance,
82
VCAlarmQueueSelectByType, 82
VCASetArmed, 79
VCAStatusAnswer, 79
VCAStatusRequest, 79
VCChangeSceneByName, 83
VCClearSceneByName, 83
VCFullMode, 83
VCSceneChanged, 88
VCSetAudioLevel, 83
VCShowViewerText, 83
VCStretchMode, 83
VideoContrastDetected, 79
VideoContrastFailed, 80
VideoSetImageBrightness, 80
VideoSetImageContrast, 80
VideoSetImageSaturation, 80
VideoSourceChanged, 80
VideoSyncDetected, 81
VideoSyncFailed, 81
ViewerChangeScene, 84
ViewerClear, 84
ViewerCleared, 88
ViewerClearScene, 84
ViewerClearTextOutput, 84
ViewerConnect, 84
ViewerConnected, 89
ViewerConnectLive, 85
ViewerExportPicture, 85
ViewerJumpByTime, 85
ViewerMaximize, 85
ViewerPlayFromTime, 85
ViewerPlayModeChanged, 89
ViewerPrintPicture, 86
ViewerSelect, 86
ViewerSelectionChanged, 89
ViewerSetPlayMode, 86
ViewerShowAlarmByInstance, 86
ViewerShowAlarmByKey, 86
ViewerShowAlarmByType, 87
ViewerSyncAudioAndVideo, 84
ViewerTextOutput, 87
WatchdogActivate, 42
WatchdogDeactivate, 42
WatchdogTrigger, 42
ZoomIn, 35
ZoomOut, 35
ZoomStop, 35
116
GEVISCOPE actions – overview – v. 2.95 – September 5, 2013