All actions for low-level notification of the device or media channels changes.
Action name:DeviceFound(Type, Name, Serial)
Action category: logical
This action will be fired when the USB or NET device is connected to the system. It is also fired at start-up for all detected devices.
| Parameter | Function | |
|---|---|---|
| device type | Type | Type of the device. |
| device name | Name | Device name if assigned in setup, empty otherwise. |
| serial ID | Serial | Serial ID of the device. |
Action name:DeviceNewFirmware(Type, Name, Serial, Firmware)
Action category: logical
This action will be fired when the USB or NET device has got the new firmware.
| Parameter | Function | |
|---|---|---|
| device type | Type | Type of the device. |
| device name | Name | Device name if assigned in setup, empty otherwise. |
| serial ID | Serial | Serial ID of the device. |
| firmware serial | Firmware | Serial ID of the firmware. |
Action name:DevicePluginError(Channel, Type, SubType, Name, Serial, ErrorClass, ErrorCode, Description)
Action category: logical
This action notifies device plugin error.
| Parameter | Function | |
|---|---|---|
| channel | Channel | Channel. |
| device type | Type | Type of the device. |
| device sub type | SubType | Sub type of the device. |
| device name | Name | Device name. |
| serial ID | Serial | Serial ID of the device. |
| error class | ErrorClass | Error class of the error occured. |
| error code | ErrorCode | Plugin type specific error code. |
| description | Description | Error description. |
Action name:DevicePluginState(Channel, Type, SubType, Name, Serial, State, InternalState, Description)
Action category: logical
This action notifies device plugin state.
| Parameter | Function | |
|---|---|---|
| channel | Channel | Channel. |
| device type | Type | Type of the device. |
| device sub type | SubType | Sub type of the device. |
| device name | Name | Device name. |
| serial ID | Serial | Serial ID of the device. |
| plugin state | State | New plugin device state. |
| internal state | InternalState | Plugin device specific state. |
| description | Description | State description. |
Action name:DeviceReattached(Type, Name, Serial)
Action category: logical
This action will be fired when the USB or NET device is reattached to the system.
| Parameter | Function | |
|---|---|---|
| device type | Type | Type of the device. |
| device name | Name | Device name if assigned in setup, empty otherwise. |
| serial ID | Serial | Serial ID of the device. |
Action name:DeviceRemoved(Type, Name, Serial)
Action category: logical
This action will be fired when the USB or NET device is disconnected from the system. It is also fired at the start-up for all parameterized but not present devices.
| Parameter | Function | |
|---|---|---|
| device type | Type | Type of the device. |
| device name | Name | Device name if assigned in setup, empty otherwise. |
| serial ID | Serial | Serial ID of the device. |