# GscActionsOverview_EN > Converted from `GeViScope/Additional documentation/GscActionsOverview_EN.pdf` using `pdftotext -layout`. GEUTEBRUCK GEVISCOPE actions overview english v. 2.95, September 5, 2013 Dmitri Schamschurko DRAFT for internal use only GEUTEBRÜCK GmbH Im Nassen 7–9 D–53578 Windhagen Deutschland Tel: +49 (0) 2645/137–0 Fax: +49 (0) 2645/137–999 Web: www.geutebrueck.de Abstract This document gives an overview about GEVISCOPE actions in the current version 2.95 from September 5, 2013. This document is part of the GEVISCOPE SDK. Disclaimer All possible care has been used to assure the information contained in this specifi- cation is as accurate and complete as possible. However, the author reserves the rights not to be responsible for the topicality, correctness, completeness or qual- ity of the information provided, and therefore is not liable for any damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect. The author reserves the rights to extend, change or delete parts or the complete publication without separate announcement. GEUTEBRUCK Contents 1 General 15 1.1 Used notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1.2 Action classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2 ATM/ACS 16 2.1 ACS access denied . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.2 ACS access granted . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.3 ACS raw answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.4 ACS raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.5 ATM raw answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.6 ATM raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.7 ATM transaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3 Audio control 18 3.1 ABC connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.2 ABC disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.3 ABC play file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.4 Sensor audio alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4 Backup actions 19 4.1 Abort all auto backups . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.2 Abort auto backup . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.3 Auto backup capacity file auto deleted . . . . . . . . . . . . . . . . 19 4.4 Auto backup capacity out of disk space . . . . . . . . . . . . . . . . 20 4.5 Auto backup capacity warning . . . . . . . . . . . . . . . . . . . . . 20 4.6 Auto backup file done . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.7 Auto backup file progress . . . . . . . . . . . . . . . . . . . . . . . 21 4.8 Auto backup file started . . . . . . . . . . . . . . . . . . . . . . . . 22 4.9 Auto backup operation done . . . . . . . . . . . . . . . . . . . . . . 22 4.10 Auto backup operation started . . . . . . . . . . . . . . . . . . . . . 23 4.11 Auto backup schedule done . . . . . . . . . . . . . . . . . . . . . . 23 4.12 Auto backup schedule started . . . . . . . . . . . . . . . . . . . . . 23 4.13 Backup event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4.14 Event backup done . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 3 GEUTEBRUCK 4.15 Event backup file done . . . . . . . . . . . . . . . . . . . . . . . . . 24 4.16 Event backup file progress . . . . . . . . . . . . . . . . . . . . . . . 25 4.17 Event backup file started . . . . . . . . . . . . . . . . . . . . . . . . 25 4.18 Event backup started . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.19 Start auto backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5 Camera control 26 5.1 Auto focus off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.2 Auto focus on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.3 Camera RAW output . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.4 Camera apply profile . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5.5 Camera backlight compensation mode . . . . . . . . . . . . . . . . 26 5.6 Camera clear preset text . . . . . . . . . . . . . . . . . . . . . . . . 27 5.7 Camera day/night mode . . . . . . . . . . . . . . . . . . . . . . . . 27 5.8 Camera light off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.9 Camera light on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.10 Camera manual iris off . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.11 Camera manual iris on . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.12 Camera off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.13 Camera on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.14 Camera pump off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.15 Camera pump on . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.16 Camera select char mode . . . . . . . . . . . . . . . . . . . . . . . 28 5.17 Camera set preset text . . . . . . . . . . . . . . . . . . . . . . . . . 28 5.18 Camera spec func U off . . . . . . . . . . . . . . . . . . . . . . . . 28 5.19 Camera spec func U on . . . . . . . . . . . . . . . . . . . . . . . . 28 5.20 Camera spec func V off . . . . . . . . . . . . . . . . . . . . . . . . 29 5.21 Camera spec func V on . . . . . . . . . . . . . . . . . . . . . . . . 29 5.22 Camera spec func X off . . . . . . . . . . . . . . . . . . . . . . . . 29 5.23 Camera spec func X on . . . . . . . . . . . . . . . . . . . . . . . . 29 5.24 Camera spec func Y off . . . . . . . . . . . . . . . . . . . . . . . . 29 5.25 Camera spec func Y on . . . . . . . . . . . . . . . . . . . . . . . . 29 5.26 Camera stop all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 5.27 Camera text off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.28 Camera text on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 5.29 Camera tour start . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.30 Camera tour stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.31 Camera version off . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.32 Camera version on . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.33 Camera wash-wipe off . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.34 Camera wash-wipe on . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.35 Clear default position . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.36 Clear preset position . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.37 Fast speed off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.38 Fast speed on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.39 Focus far . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.40 Focus near . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 5.41 Focus stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5.42 Iris close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5.43 Iris open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5.44 Iris stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5.45 Move by speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 5.46 Move to absolute position . . . . . . . . . . . . . . . . . . . . . . . 32 5.47 Move to default position . . . . . . . . . . . . . . . . . . . . . . . . 33 5.48 Move to preset position . . . . . . . . . . . . . . . . . . . . . . . . 33 5.49 Move to relative position . . . . . . . . . . . . . . . . . . . . . . . . 33 5.50 Pan auto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5.51 Pan left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5.52 Pan right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5.53 Pan stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 5.54 Save default position . . . . . . . . . . . . . . . . . . . . . . . . . . 34 5.55 Save preset position . . . . . . . . . . . . . . . . . . . . . . . . . . 34 5.56 Set camera text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 5.57 Tilt down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 5.58 Tilt stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 5.59 Tilt up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5.60 Zoom in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5.61 Zoom out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 5.62 Zoom stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 5 GEUTEBRUCK 6 Cash management actions 35 6.1 Safebag close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6.2 Safebag data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 6.3 Safebag open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 6.4 Safebag passing of risk data . . . . . . . . . . . . . . . . . . . . . . 37 6.5 Safebag passing of risk start . . . . . . . . . . . . . . . . . . . . . 37 6.6 Safebag passing of risk stop . . . . . . . . . . . . . . . . . . . . . . 37 7 Device information 38 7.1 Device found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 7.2 Device plugin error . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 7.3 Device plugin state . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7.4 Device reattached . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7.5 Device removed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7.6 New firmware received . . . . . . . . . . . . . . . . . . . . . . . . . 39 8 Digital contacts 40 8.1 Case has been closed . . . . . . . . . . . . . . . . . . . . . . . . . 40 8.2 Case has been opened . . . . . . . . . . . . . . . . . . . . . . . . 40 8.3 Digital input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 8.4 IOI43 reset mainboard . . . . . . . . . . . . . . . . . . . . . . . . . 40 8.5 IOI43 temperature notification . . . . . . . . . . . . . . . . . . . . . 40 8.6 IOI43 watchdog activate . . . . . . . . . . . . . . . . . . . . . . . . 40 8.7 IOI43 watchdog deactivate . . . . . . . . . . . . . . . . . . . . . . . 41 8.8 IOI43 watchdog trigger . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.9 Key pressed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.10 Key released . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.11 Reset mainboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.12 Set digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.13 Set system LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.14 Set system LED to blink . . . . . . . . . . . . . . . . . . . . . . . . 42 8.15 Temperature notification . . . . . . . . . . . . . . . . . . . . . . . . 42 8.16 Watchdog activate . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 8.17 Watchdog deactivate . . . . . . . . . . . . . . . . . . . . . . . . . . 42 8.18 Watchdog trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 6 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 9 Imex 42 9.1 Imex capacity file auto deleted . . . . . . . . . . . . . . . . . . . . 43 9.2 Imex capacity out of disk space. . . . . . . . . . . . . . . . . . . . . 43 9.3 Imex capacity warning . . . . . . . . . . . . . . . . . . . . . . . . . 43 9.4 Imex export event image . . . . . . . . . . . . . . . . . . . . . . . . 44 9.5 Imex export image from DB . . . . . . . . . . . . . . . . . . . . . . 44 9.6 Imex export image from live stream . . . . . . . . . . . . . . . . . . 44 10 LPS 44 10.1 LPS position data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 10.2 LPS query position . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 11 Lenel 45 11.1 Lenel access event . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 11.2 Lenel fire event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 11.3 Lenel intercom event . . . . . . . . . . . . . . . . . . . . . . . . . . 47 11.4 Lenel raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 11.5 Lenel refresh names . . . . . . . . . . . . . . . . . . . . . . . . . . 47 11.6 Lenel security event . . . . . . . . . . . . . . . . . . . . . . . . . . 48 11.7 Lenel video event . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 12 POS 49 12.1 Barcode data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 12.2 Filling pump status . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 12.3 Interface raw answer . . . . . . . . . . . . . . . . . . . . . . . . . . 49 12.4 Interface raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 12.5 POS data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 12.6 POS status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 12.7 Terminal article data . . . . . . . . . . . . . . . . . . . . . . . . . . 50 12.8 Terminal payment data . . . . . . . . . . . . . . . . . . . . . . . . . 51 13 Perimeter protection 51 13.1 PP device alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 13.2 PP device input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 13.3 PP device offline . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 13.4 PP device online . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 7 GEUTEBRUCK 13.5 PP interface offline . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 13.6 PP interface online . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 13.7 PP query interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 13.8 PP set device output . . . . . . . . . . . . . . . . . . . . . . . . . . 52 13.9 PP subcell alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 13.10 PP zone alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 14 Remote export 53 14.1 Cancel export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 14.2 Export finished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 14.3 Export progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 14.4 Initialize remote export . . . . . . . . . . . . . . . . . . . . . . . . . 54 14.5 Set export marker . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 14.6 Start remote export . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 14.7 Start scene store . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 15 SKIDATA 55 15.1 SKIDATA control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 15.2 SKIDATA device event . . . . . . . . . . . . . . . . . . . . . . . . . 55 15.3 SKIDATA entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 15.4 SKIDATA exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 15.5 SKIDATA transaction . . . . . . . . . . . . . . . . . . . . . . . . . . 56 16 Supply chain security 56 16.1 GSCS vehicle access denied . . . . . . . . . . . . . . . . . . . . . 56 16.2 GSCS vehicle access expired . . . . . . . . . . . . . . . . . . . . . 56 16.3 GSCS vehicle access granted . . . . . . . . . . . . . . . . . . . . . 57 16.4 GSCS vehicle access pending . . . . . . . . . . . . . . . . . . . . 57 16.5 Log NPR recognition . . . . . . . . . . . . . . . . . . . . . . . . . . 58 16.6 Log barcode data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 16.7 Log barcode data LPS . . . . . . . . . . . . . . . . . . . . . . . . . 58 17 System actions 59 17.1 Blocking filter activate . . . . . . . . . . . . . . . . . . . . . . . . . 59 17.2 Blocking filter deactivate . . . . . . . . . . . . . . . . . . . . . . . . 59 17.3 Custom action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 8 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 17.4 Database recording info per ring . . . . . . . . . . . . . . . . . . . 60 17.5 Database recording info total . . . . . . . . . . . . . . . . . . . . . 60 17.6 Database started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 17.7 Event recording changed . . . . . . . . . . . . . . . . . . . . . . . 61 17.8 Event started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 17.9 Event stopped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 17.10 FRC notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 17.11 GEMOS alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 17.12 IP switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 17.13 Kill all events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 17.14 Kill event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 17.15 Kill event by instance . . . . . . . . . . . . . . . . . . . . . . . . . . 62 17.16 Live check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 17.17 Redundant power failure . . . . . . . . . . . . . . . . . . . . . . . . 63 17.18 Redundant power ok . . . . . . . . . . . . . . . . . . . . . . . . . . 63 17.19 SMRP viewer cleared . . . . . . . . . . . . . . . . . . . . . . . . . 63 17.20 SMRP viewer connected . . . . . . . . . . . . . . . . . . . . . . . . 63 17.21 SMTP mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 17.22 Set clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 17.23 Set watchdog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 17.24 Setup changed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 17.25 Setup upload progress . . . . . . . . . . . . . . . . . . . . . . . . . 64 17.26 Start event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 17.27 Stop all events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 17.28 Stop event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 17.29 Stop event by instance . . . . . . . . . . . . . . . . . . . . . . . . . 65 17.30 System error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 17.31 System info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 17.32 System settings changed . . . . . . . . . . . . . . . . . . . . . . . 66 17.33 System started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 17.34 System terminating . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 17.35 System warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 17.36 Transfer binary buffer . . . . . . . . . . . . . . . . . . . . . . . . . . 67 17.37 Transfer binary channel buffer . . . . . . . . . . . . . . . . . . . . . 67 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 9 GEUTEBRUCK 17.38 User login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 17.39 User login failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 17.40 User logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 18 Video control 68 18.1 Activate external process . . . . . . . . . . . . . . . . . . . . . . . 68 18.2 CPA measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 18.3 Change AD parameter set . . . . . . . . . . . . . . . . . . . . . . . 68 18.4 Change CPA parameter set . . . . . . . . . . . . . . . . . . . . . . 69 18.5 Change GTectVMX parameter set . . . . . . . . . . . . . . . . . . 69 18.6 Change OBTRACK parameter set . . . . . . . . . . . . . . . . . . 69 18.7 Change VMD parameter set . . . . . . . . . . . . . . . . . . . . . . 69 18.8 Change camera profile . . . . . . . . . . . . . . . . . . . . . . . . . 69 18.9 Channel error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 18.10 Channel info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 18.11 Channel live check . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 18.12 Channel warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 18.13 Enable client VCA . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 18.14 G-Tect analytics live check . . . . . . . . . . . . . . . . . . . . . . . 71 18.15 G-Tect scene alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 18.16 G-Tect scene alarm finished . . . . . . . . . . . . . . . . . . . . . . 71 18.17 G-Tect/Dual sensor alarm . . . . . . . . . . . . . . . . . . . . . . . 71 18.18 G-Tect/Dual sensor alarm finished . . . . . . . . . . . . . . . . . . 72 18.19 G-Tect/VMX alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 18.20 G-Tect/VMX alarm finished . . . . . . . . . . . . . . . . . . . . . . 72 18.21 IAS settings changed . . . . . . . . . . . . . . . . . . . . . . . . . . 72 18.22 IP camera failover notification . . . . . . . . . . . . . . . . . . . . . 72 18.23 IP camera failover restore . . . . . . . . . . . . . . . . . . . . . . . 73 18.24 IP camera raw command . . . . . . . . . . . . . . . . . . . . . . . 73 18.25 Make CPA reference image . . . . . . . . . . . . . . . . . . . . . . 73 18.26 Media channel setup . . . . . . . . . . . . . . . . . . . . . . . . . . 73 18.27 NPR raw data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 18.28 NPR recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 18.29 OBTRACK channel counter . . . . . . . . . . . . . . . . . . . . . . 75 18.30 OBTRACK channel counter threshold . . . . . . . . . . . . . . . . 75 10 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.31 OBTRACK channel set counter . . . . . . . . . . . . . . . . . . . . 75 18.32 OBTRACK frame raw data . . . . . . . . . . . . . . . . . . . . . . . 75 18.33 OBTRACK group counter . . . . . . . . . . . . . . . . . . . . . . . 76 18.34 OBTRACK group counter threshold . . . . . . . . . . . . . . . . . . 76 18.35 OBTRACK group set counter . . . . . . . . . . . . . . . . . . . . . 76 18.36 OBTRACK object raw data . . . . . . . . . . . . . . . . . . . . . . . 77 18.37 OBTRACK tunnel alarm . . . . . . . . . . . . . . . . . . . . . . . . 77 18.38 Sensor alarm finished . . . . . . . . . . . . . . . . . . . . . . . . . 77 18.39 Sensor inhibit alarm finished . . . . . . . . . . . . . . . . . . . . . . 78 18.40 Sensor inhibit video alarm . . . . . . . . . . . . . . . . . . . . . . . 78 18.41 Sensor video alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 18.42 Set system time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 18.43 Set test picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . 79 18.44 VCA set armed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 18.45 VCA status answer . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 18.46 VCA status request . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 18.47 Video contrast detected . . . . . . . . . . . . . . . . . . . . . . . . 79 18.48 Video contrast failed . . . . . . . . . . . . . . . . . . . . . . . . . . 80 18.49 Video set image brightness . . . . . . . . . . . . . . . . . . . . . . 80 18.50 Video set image contrast . . . . . . . . . . . . . . . . . . . . . . . . 80 18.51 Video set image saturation . . . . . . . . . . . . . . . . . . . . . . . 80 18.52 Video source has changed . . . . . . . . . . . . . . . . . . . . . . 80 18.53 Video sync detected . . . . . . . . . . . . . . . . . . . . . . . . . . 81 18.54 Video sync failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 19 Viewer actions 81 19.1 VC alarm queue confirm . . . . . . . . . . . . . . . . . . . . . . . . 81 19.2 VC alarm queue confirm by instance . . . . . . . . . . . . . . . . . 81 19.3 VC alarm queue confirm by type . . . . . . . . . . . . . . . . . . . 81 19.4 VC alarm queue remove . . . . . . . . . . . . . . . . . . . . . . . . 82 19.5 VC alarm queue remove by instance . . . . . . . . . . . . . . . . . 82 19.6 VC alarm queue remove by type . . . . . . . . . . . . . . . . . . . 82 19.7 VC alarm queue select . . . . . . . . . . . . . . . . . . . . . . . . . 82 19.8 VC alarm queue select by instance . . . . . . . . . . . . . . . . . . 82 19.9 VC alarm queue select by type . . . . . . . . . . . . . . . . . . . . 82 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 11 GEUTEBRUCK 19.10 VC change scene by name . . . . . . . . . . . . . . . . . . . . . . 83 19.11 VC clear scene by name . . . . . . . . . . . . . . . . . . . . . . . . 83 19.12 VC full mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 19.13 VC set audio level . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 19.14 VC show viewer text . . . . . . . . . . . . . . . . . . . . . . . . . . 83 19.15 VC stretch mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 19.16 Viewer change scene . . . . . . . . . . . . . . . . . . . . . . . . . 84 19.17 Viewer change sync audio/video . . . . . . . . . . . . . . . . . . . 84 19.18 Viewer clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 19.19 Viewer clear scene . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 19.20 Viewer clear text output . . . . . . . . . . . . . . . . . . . . . . . . 84 19.21 Viewer connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 19.22 Viewer connect live . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 19.23 Viewer export picture . . . . . . . . . . . . . . . . . . . . . . . . . . 85 19.24 Viewer jump by time . . . . . . . . . . . . . . . . . . . . . . . . . . 85 19.25 Viewer maximize . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 19.26 Viewer play from time . . . . . . . . . . . . . . . . . . . . . . . . . 85 19.27 Viewer print picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 19.28 Viewer select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 19.29 Viewer set play mode . . . . . . . . . . . . . . . . . . . . . . . . . . 86 19.30 Viewer show alarm by instance . . . . . . . . . . . . . . . . . . . . 86 19.31 Viewer show alarm by key . . . . . . . . . . . . . . . . . . . . . . . 86 19.32 Viewer show alarm by type . . . . . . . . . . . . . . . . . . . . . . 87 19.33 Viewer text output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 20 Viewer notifications 87 20.1 Image export notification . . . . . . . . . . . . . . . . . . . . . . . . 87 20.2 Scene store modification . . . . . . . . . . . . . . . . . . . . . . . . 88 20.3 VC alarm queue notification . . . . . . . . . . . . . . . . . . . . . . 88 20.4 VC scene changed . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 20.5 Viewer cleared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 20.6 Viewer connected . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 20.7 Viewer play mode changed . . . . . . . . . . . . . . . . . . . . . . 89 20.8 Viewer selection changed . . . . . . . . . . . . . . . . . . . . . . . 89 A Examples 90 12 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK Index 107 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 13 GEUTEBRUCK 14 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 1 General 1.1 Used notation This section explains the notation used in this publication. Consider the action ‘User login’. This action is described by the following section: 17.38 User login This action will be fired when the user has connected to the system. • first user – Name of the user connected to the system. • second user – Name of the second user by four eyes authentication. • remote host – Host from where the connection is done. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. The section heading – User login – gives the plain name of the action. The line below describes the action briefly. The list of parameters – if any – completes the section. For every action’s parame- ter its plain name – first user , and its description are given. Optional parameters are marked by red names. 1.2 Action classes All GEVISCOPE actions are divided into the following action classes: ATM/ACS ATM and ACS actions. Audio control All actions to control the audio streams, also all notifications about the state change of the audio streams. Backup actions All actions for backup. Camera control All actions to remote control the PTZ heads or camera adjustments. Cash management actions All actions for cash management. Device information All actions for low-level notification of the device or media channels changes. Digital contacts All actions for handling digital inputs and outputs. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 15 GEUTEBRUCK Imex Image export. LPS LPS messages. Lenel Lenel. POS POS (point of sale). Perimeter protection Perimeter protection. Remote export Remote export. SKIDATA SKIDATA messages. Supply chain security Supply chain security. System actions All actions describing system behaviour. Video control All actions to control the video streams, also all notifications about the state change of the video streams. Viewer actions All actions for viewer customizing. Viewer notifications All viewer notifications. 2 ATM/ACS ATM and ACS actions. 2.1 ACS access denied ACS access denied. • ACS – ACS name. • ACS no – ACS no. • account – Account no. • bank code – Bank code. • card no – Card no. • time stamp – Time stamp. • reason – Reason. 16 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 2.2 ACS access granted ACS access granted. • ACS – ACS name. • ACS no – ACS no. • account – Account no. • bank code – Bank code. • card no – Card no. • time stamp – Time stamp. 2.3 ACS raw answer ACS raw answer. • ACS – ACS name. • time stamp – Time stamp. • answer – ACS answer. 2.4 ACS raw data ACS raw data. • ACS – ACS name. • time stamp – Time stamp. • data – ACS data. 2.5 ATM raw answer ATM raw answer. • ATM – ATM name. • time stamp – Time stamp. • answer – ATM answer. 2.6 ATM raw data ATM raw data. • ATM – ATM name. • time stamp – Time stamp. • data – ATM data. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 17 GEUTEBRUCK 2.7 ATM transaction ATM transaction. • ATM – ATM name. • new transaction – New transaction. • photostep – Photostep. • ATM no – ATM no. • account – Account no. • bank code – Bank code. • card no – Card no. • tan 1 – TAN 1. • tan 2 – TAN 2. • time stamp 1 – Time stamp 1. • time stamp 2 – Time stamp 2. • amount – Amount. • currency – Currency. 3 Audio control All actions to control the audio streams, also all notifications about the state change of the audio streams. 3.1 ABC connect Connect audio back channel. • address – Address of the remote server. 3.2 ABC disconnect Disconnect audio back channel. This action has no parameters. 18 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 3.3 ABC play file Play file on audio back channel. • file ID – File ID. • file name – Name of the file. • repeat – Repeat file automatically 3.4 Sensor audio alarm Audio alarm detected. • channel – Channel. 4 Backup actions All actions for backup. 4.1 Abort all auto backups Abort all auto backups. This action has no parameters. 4.2 Abort auto backup Abort auto backup. • schedule – Schedule. 4.3 Auto backup capacity file auto deleted Auto backup capacity monitoring: file auto deleted. • warning – Warning. • destination – Destination. • total capacity – Total capacity. • free capacity – Free capacity. • allocated by GBF – Allocated by GBF. • percent free – Percent free. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 19 GEUTEBRUCK • percent allocated – Percent allocated. • percent allocated by GBF – Percent allocated by GBF. • file size – File size. • file name – File name. 4.4 Auto backup capacity out of disk space Auto backup capacity monitoring: out of disk space. • warning – Warning. • destination – Destination. • total capacity – Total capacity. • free capacity – Free capacity. • allocated by GBF – Allocated by GBF. • percent free – Percent free. • percent allocated – Percent allocated. • percent allocated by GBF – Percent allocated by GBF. 4.5 Auto backup capacity warning Auto backup capacity monitoring: capacity warning. • warning – Warning. • destination – Destination. • total capacity – Total capacity. • free capacity – Free capacity. • allocated by GBF – Allocated by GBF. • percent free – Percent free. • percent allocated – Percent allocated. • percent allocated by GBF – Percent allocated by GBF. 20 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 4.6 Auto backup file done Auto backup progress notification: file done. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • operation count – Operation count. • timer start – Timer start. • operation index – Operation index. • operation start time – Operation start time. • source – Source. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • file index – File index. • file name – File name. • file size – File size. 4.7 Auto backup file progress Auto backup progress notification: file progress. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • operation count – Operation count. • timer start – Timer start. • operation index – Operation index. • operation start time – Operation start time. • source – Source. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • file index – File index. • file name – File name. • file size – File size. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 21 GEUTEBRUCK 4.8 Auto backup file started Auto backup progress notification: file started. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • operation count – Operation count. • timer start – Timer start. • operation index – Operation index. • operation start time – Operation start time. • source – Source. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • file index – File index. • file name – File name. 4.9 Auto backup operation done Auto backup progress notification: operation done. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • operation count – Operation count. • timer start – Timer start. • operation index – Operation index. • operation start time – Operation start time. • operation stop time – Operation stop time. • source – Source. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • error code – Operation error code. 22 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 4.10 Auto backup operation started Auto backup progress notification: operation started. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • operation count – Operation count. • timer start – Timer start. • operation index – Operation index. • operation start time – Operation start time. • source – Source. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. 4.11 Auto backup schedule done Auto backup progress notification: schedule done. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • stop time – Schedule stop time. • operation count – Operation count. • timer start – Timer start. 4.12 Auto backup schedule started Auto backup progress notification: schedule started. • schedule – Schedule. • start time – Start time, empty during event backup. • effective start time – Effective schedule start time. • operation count – Operation count. • timer start – Timer start. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 23 GEUTEBRUCK 4.13 Backup event Backup event. • instance ID – Instance ID of the event. • event type – Type of the event. • destination – Destination. • start hint ID – Optional start hint ID. • stop hint ID – Optional stop hint ID. • sub folder – Sub folder to backup event. 4.14 Event backup done Event backup progress notification: backup done. • job ID – Backup job ID. • event type – Type of the event. • instance ID – Instance ID of the event. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • start time – Backup start time. • stop time – Backup stop time. • error code – Operation error code. 4.15 Event backup file done Event backup progress notification: file done. • job ID – Backup job ID. • event type – Type of the event. • instance ID – Instance ID of the event. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • start time – Effective backup start time. • file index – File index. • file name – File name. • file size – File size. 24 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 4.16 Event backup file progress Event backup progress notification: file progress. • job ID – Backup job ID. • event type – Type of the event. • instance ID – Instance ID of the event. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • start time – Effective backup start time. • file index – File index. • file name – File name. • file size – File size. 4.17 Event backup file started Event backup progress notification: file started. • job ID – Backup job ID. • event type – Type of the event. • instance ID – Instance ID of the event. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • start time – Effective backup start time. • file index – File index. • file name – File name. 4.18 Event backup started Event backup progress notification: backup started. • job ID – Backup job ID. • event type – Type of the event. • instance ID – Instance ID of the event. • destination – Destination. • file size limit – File size limit. • band width limit – Band width limit. • start time – Backup start time. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 25 GEUTEBRUCK 4.19 Start auto backup Start auto backup. • schedule – Schedule. 5 Camera control All actions to remote control the PTZ heads or camera adjustments. 5.1 Auto focus off Disable auto focus of the camera. • PTZ head – PTZ head. 5.2 Auto focus on Enable auto focus of the camera. • PTZ head – PTZ head. 5.3 Camera RAW output Output unformatted command to the camera. • PTZ head – PTZ head. • output – RAW command to output. 5.4 Camera apply profile Apply a predefined profile settings to the camera. • PTZ head – PTZ head. • profile – Profile name. 5.5 Camera backlight compensation mode Change backlight compensation mode of the camera. • PTZ head – PTZ head. • mode – Backlight compensation mode. 26 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 5.6 Camera clear preset text Clear camera text for preset position. • PTZ head – PTZ head. • position – Preset position. 5.7 Camera day/night mode Change day/night mode of the camera. • PTZ head – PTZ head. • mode – Day/night mode. 5.8 Camera light off Turn camera light off. • PTZ head – PTZ head. 5.9 Camera light on Turn camera light on. • PTZ head – PTZ head. 5.10 Camera manual iris off Disable manual iris of the camera. • PTZ head – PTZ head. 5.11 Camera manual iris on Enable manual iris of the camera. • PTZ head – PTZ head. 5.12 Camera off Turn camera off. • PTZ head – PTZ head. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 27 GEUTEBRUCK 5.13 Camera on Turn camera on. • PTZ head – PTZ head. 5.14 Camera pump off Turn camera pump off. • PTZ head – PTZ head. 5.15 Camera pump on Turn camera pump on. • PTZ head – PTZ head. 5.16 Camera select char mode Select camera character mode. • PTZ head – PTZ head. • mode – Character mode. 5.17 Camera set preset text Set camera text for preset position. • PTZ head – PTZ head. • position – Preset position. 5.18 Camera spec func U off Turn camera special function U off. • PTZ head – PTZ head. 5.19 Camera spec func U on Turn camera special function U on. • PTZ head – PTZ head. 28 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 5.20 Camera spec func V off Turn camera special function V off. • PTZ head – PTZ head. 5.21 Camera spec func V on Turn camera special function V on. • PTZ head – PTZ head. 5.22 Camera spec func X off Turn camera special function X off. • PTZ head – PTZ head. 5.23 Camera spec func X on Turn camera special function X on. • PTZ head – PTZ head. 5.24 Camera spec func Y off Turn camera special function Y off. • PTZ head – PTZ head. 5.25 Camera spec func Y on Turn camera special function Y on. • PTZ head – PTZ head. 5.26 Camera stop all Camera stop all. • PTZ head – PTZ head. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 29 GEUTEBRUCK 5.27 Camera text off Disable camera text. • PTZ head – PTZ head. 5.28 Camera text on Enable camera text. • PTZ head – PTZ head. 5.29 Camera tour start Start camera tour. • PTZ head – PTZ head. • tour ID – Tour ID. • tour name – Tour name. 5.30 Camera tour stop Stop camera tour. • PTZ head – PTZ head. 5.31 Camera version off Hide camera version string. • PTZ head – PTZ head. 5.32 Camera version on Show camera version string. • PTZ head – PTZ head. 5.33 Camera wash-wipe off Turn camera wash-wipe off. • PTZ head – PTZ head. 30 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 5.34 Camera wash-wipe on Turn camera wash-wipe on. • PTZ head – PTZ head. 5.35 Clear default position Clear camera default position. • PTZ head – PTZ head. 5.36 Clear preset position Clear camera preset position. • PTZ head – PTZ head. • position – Preset position. 5.37 Fast speed off Turn camera fast speed off. • PTZ head – PTZ head. 5.38 Fast speed on Turn camera fast speed on. • PTZ head – PTZ head. 5.39 Focus far Focus camera far. • PTZ head – PTZ head. • speed – Focus speed. 5.40 Focus near Focus camera near. • PTZ head – PTZ head. • speed – Focus speed. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 31 GEUTEBRUCK 5.41 Focus stop Stop camera focus. • PTZ head – PTZ head. 5.42 Iris close Close camera iris. • PTZ head – PTZ head. 5.43 Iris open Open camera iris. • PTZ head – PTZ head. 5.44 Iris stop Stop camera iris. • PTZ head – PTZ head. 5.45 Move by speed Move camera by speed. • PTZ head – PTZ head. • alpha speed – Speed in alpha (pan) direction (0/100 %). • beta speed – Speed in beta (tilt) direction (0/100 %). 5.46 Move to absolute position Move camera to absolute position. • PTZ head – PTZ head. • alpha – Alpha angle (-180/+180). • beta – Beta angle (-90/+90). • alpha speed – Speed in alpha direction (0/100 %). • beta speed – Speed in beta direction (0/100 %). 32 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 5.47 Move to default position Move camera to default position. • PTZ head – PTZ head. 5.48 Move to preset position Move camera to preset position. • PTZ head – PTZ head. • position – Preset position. 5.49 Move to relative position Move camera to relative position. • PTZ head – PTZ head. • alpha – Alpha angle (-180/+180). • beta – Beta angle (-90/+90). • alpha speed – Speed in alpha direction (0/100 %). • beta speed – Speed in beta direction (0/100 %). 5.50 Pan auto Turn auto pan of the camera. • PTZ head – PTZ head. • modus – Pan modus. 5.51 Pan left Pan camera to the left. • PTZ head – PTZ head. • speed – Pan speed. 5.52 Pan right Pan camera to the right. • PTZ head – PTZ head. • speed – Pan speed. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 33 GEUTEBRUCK 5.53 Pan stop Stop pan movement. • PTZ head – PTZ head. 5.54 Save default position Save current camera position as default position. • PTZ head – PTZ head. 5.55 Save preset position Save current camera position as preset position. • PTZ head – PTZ head. • position – Preset position. 5.56 Set camera text Set camera text. • PTZ head – PTZ head. • text – Text to superimpose. 5.57 Tilt down Tilt camera down. • PTZ head – PTZ head. • speed – Tilt speed. 5.58 Tilt stop Stop tilt movement. • PTZ head – PTZ head. 34 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 5.59 Tilt up Tilt camera up. • PTZ head – PTZ head. • speed – Tilt speed. 5.60 Zoom in Zoom camera in. • PTZ head – PTZ head. • speed – Zoom speed. 5.61 Zoom out Zoom camera out. • PTZ head – PTZ head. • speed – Zoom speed. 5.62 Zoom stop Stop camera zoom. • PTZ head – PTZ head. 6 Cash management actions All actions for cash management. 6.1 Safebag close Safebag close. • working place – Working place no. • start time – Start time stamp. • stop time – Stop time stamp. • safebag no. – Safebag no. • safebag info – Additional info about safebag. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 35 GEUTEBRUCK • step ID – Processing step ID. • debit – Debit. • total – Total. • difference – Difference between debit and total. • has difference – Difference between debit and total is not zero. • notes – Notes. • coins – Coins. • cheques – Cheques. 6.2 Safebag data Safebag data. • working place – Working place no. • start time – Start time stamp. • safebag no. – Safebag no. • safebag info – Additional info about safebag. • step ID – Processing step ID. • debit – Debit. • total – Total. • difference – Difference between debit and total. • has difference – Difference between debit and total is not zero. • notes – Notes. • coins – Coins. • cheques – Cheques. 6.3 Safebag open Safebag open. • working place – Working place no. • start time – Start time stamp. • safebag no. – Safebag no. • safebag info – Additional info about safebag. • step ID – Processing step ID. 36 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 6.4 Safebag passing of risk data Safebag passing of risk data. • working place – Working place no. • start time – Start time stamp. • safebag no. – Safebag no. • safebag info – Additional info about safebag. • step ID – Processing step ID. • user 1 – User who gives the safebag. • user 2 – User who takes the safebag. • tour no – Optional tour no. • target working place – Target working place. • passing of risk type – Passing of risk type. 6.5 Safebag passing of risk start Safebag passing of risk start. • working place – Working place no. • start time – Start time stamp. • safebag no. – Safebag no. • safebag info – Additional info about safebag. • step ID – Processing step ID. • user 1 – User who gives the safebag. • user 2 – User who takes the safebag. • tour no – Optional tour no. • target working place – Target working place. • passing of risk type – Passing of risk type. 6.6 Safebag passing of risk stop Safebag passing of risk stop. • working place – Working place no. • start time – Start time stamp. • stop time – Stop time stamp. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 37 GEUTEBRUCK • safebag no. – Safebag no. • safebag info – Additional info about safebag. • step ID – Processing step ID. • user 1 – User who gives the safebag. • user 2 – User who takes the safebag. • tour no – Optional tour no. • target working place – Target working place. • passing of risk type – Passing of risk type. 7 Device information All actions for low-level notification of the device or media channels changes. 7.1 Device found This action will be fired when the USB or NET device is connected to the system. It is also fired at start-up for all detected devices. • device type – Type of the device. • device name – Device name if assigned in setup, empty otherwise. • serial ID – Serial ID of the device. 7.2 Device plugin error This action notifies device plugin error. • channel – Channel. • device type – Type of the device. • device subtype – Subtype of the device. • device name – Device name. • serial ID – Serial ID of the device. • error class – Error class of the error occured. • error code – Plugin type specific error code. • description – Error description. 38 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 7.3 Device plugin state This action notifies device plugin state. • channel – Channel. • device type – Type of the device. • device subtype – Subtype of the device. • device name – Device name. • serial ID – Serial ID of the device. • plugin state – New plugin device state. • internal state – Plugin device specific state. • description – State description. 7.4 Device reattached This action will be fired when the USB or NET device is reattached to the system. • device type – Type of the device. • device name – Device name if assigned in setup, empty otherwise. • serial ID – Serial ID of the device. 7.5 Device removed This action will be fired when the USB or NET device is disconnected from the system. It is also fired at the start-up for all parameterized but not present devices. • device type – Type of the device. • device name – Device name if assigned in setup, empty otherwise. • serial ID – Serial ID of the device. 7.6 New firmware received This action will be fired when the USB or NET device has got the new firmware. • device type – Type of the device. • device name – Device name if assigned in setup, empty otherwise. • serial ID – Serial ID of the device. • firmware serial – Serial ID of the firmware. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 39 GEUTEBRUCK 8 Digital contacts All actions for handling digital inputs and outputs. 8.1 Case has been closed Case has been closed. This action has no parameters. 8.2 Case has been opened Case has been opened. This action has no parameters. 8.3 Digital input This action will be fired when the state of the digital input has changed. • contact – Contact. • state – New state. 8.4 IOI43 reset mainboard Reset mainboard using IOI43a/ab USB Alarm-I/O. This action has no parameters. 8.5 IOI43 temperature notification Temperature notification from IOI43a/ab USB Alarm-I/O. • ID – ID of the IOI43 module (like IOI43-00). • temperature – Temperature. 8.6 IOI43 watchdog activate Activate watchdog on IOI43a/ab USB Alarm-I/O. This action has no parameters. 40 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 8.7 IOI43 watchdog deactivate Deactivate watchdog on IOI43a/ab USB Alarm-I/O. This action has no parameters. 8.8 IOI43 watchdog trigger Trigger watchdog on IOI43a/ab USB Alarm-I/O. This action has no parameters. 8.9 Key pressed This action is notified if one of the GEVISCOPE system keys is pressed. • key – System key. 8.10 Key released This action is notified if one of the GEVISCOPE system keys is released. • key – System key. 8.11 Reset mainboard Reset mainboard using IO device. This action has no parameters. 8.12 Set digital output This action is used to modify the state of the digital output and to notify this change. • contact – Contact. • state – New state. 8.13 Set system LED This action is used to turn the system LEDs on or off. • LED – System LED. • state – New state. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 41 GEUTEBRUCK 8.14 Set system LED to blink This action is used to blink the system LEDs. • LED – System LED. • LED time ON – Time in milliseconds when the LED will be switched on. • LED time OFF – Time in milliseconds when the LED will be switched off. 8.15 Temperature notification Temperature notification from a/ab USB Alarm-I/O. • IO device type – Type of the device, which has fired the action. • ID – ID of the IO module (like IOI43-00/MIO84-00/MIO168-00). • temperature – Temperature. 8.16 Watchdog activate Activate watchdog. This action has no parameters. 8.17 Watchdog deactivate Deactivate watchdog. This action has no parameters. 8.18 Watchdog trigger Trigger watchdog. This action has no parameters. 9 Imex Image export. 42 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 9.1 Imex capacity file auto deleted Imex capacity warning: file auto deleted. • warning – Warning. • destination – Destination. • total capacity – Total capacity. • free capacity – Free capacity. • allocated by image file – Allocated by image file. • percent free – Percent free. • percent allocated – Percent allocated. • percent allocated by image file – Percent allocated by image file. • total file size – Total file size. • number of files – Number of files. 9.2 Imex capacity out of disk space. Imex capacity warning: out of disk space. • warning – Warning. • destination – Destination. • total capacity – Total capacity. • free capacity – Free capacity. • allocated by image file – Allocated by image file. • percent free – Percent free. • percent allocated – Percent allocated. • percent allocated by image file – Percent allocated by image file. 9.3 Imex capacity warning Imex capacity warning: capacity warning. • warning – Warning. • destination – Destination. • total capacity – Total capacity. • free capacity – Free capacity. • allocated by image file – Allocated by image file. • percent free – Percent free. • percent allocated – Percent allocated. • percent allocated by image file – Percent allocated by image file. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 43 GEUTEBRUCK 9.4 Imex export event image Imex export event image. • instance ID – Instance ID of the event. • event type – Type of the event. • destination – Destination. • file name – File name. 9.5 Imex export image from DB Imex export image from DB. • channel – Channel. • destination – Destination. • file name – File name. • picture time – Picture time. 9.6 Imex export image from live stream Imex export image from live stream. • channel – Channel. • destination – Destination. • file name – File name. 10 LPS LPS messages. 10.1 LPS position data LPS position data. • tag ID – Tag ID. • scanner ID – Scanner ID or IP address. • X coordinate – X coordinate of cartesian coordinates. • Y coordinate – Y coordinate of cartesian coordinates. 44 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK • Z coordinate – Z coordinate of cartesian coordinates. • latitude – Latitude of geographic coordinates. • longitude – Longitude of geographic coordinates. • area ID – Area ID. • cell ID – Cell ID. • status – Status. • time stamp – Time stamp. • data – Data. • area name – Area Name. 10.2 LPS query position Send position query for a Tag to LPS server. • tag ID – Tag ID. • scanner ID – Scanner ID or IP address. • data – Data. 11 Lenel Lenel. 11.1 Lenel access event Lenel OnGuard access event. • ID – The ID that uniquely identifies the type of this event. • panel – The name of the panel where this event originated. • device – The name of the device where this event originated. • secondary device – The ID of the secondary device where this event origi- nated. • card number – The badge ID for the card that was read, if available. • access result – The level of access that was granted that resulted from read- ing the card. • type – Event type i.e., duress, system, etc. • subtype – Event sub-type i.e., granted, door forced open, etc. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 45 GEUTEBRUCK • description – A human readable, brief description of this event. • serial number – A number that uniquely identifies the instance of the event for a particular panel. • time stamp – Time stamp. • area entered – The ID of the area that was entered, if any. • area exited – The ID of the area that was exited, if any. • asset ID – The ID of the asset related to this event, if any. • cardholder entered – Whether entry was made by the cardholder. • duress – Indicates whether this card access indicates an under duress/emergency state. • elevator floor – The elevator floor on which the access event was generated, if any. • facility code – The facility code for the card that was read, if available. • readable card – Whether the card could be read. • issue code – The issue code for the card that was read, if available. • server host – Host name of the Communication server through which the event arrived. • event text – Text associated with event 11.2 Lenel fire event Lenel OnGuard fire event. • ID – The ID that uniquely identifies the type of this event. • panel – The name of the panel where this event originated. • device – The name of the device where this event originated. • secondary device – The ID of the secondary device where this event origi- nated. • trouble code – A trouble code associated with the fire event. • type – Event type i.e., duress, system, etc. • subtype – Event sub-type i.e., granted, door forced open, etc. • description – A human readable, brief description of this event. • serial number – A number that uniquely identifies the instance of the event for a particular panel. • time stamp – Time stamp. • server host – Host name of the Communication server through which the event arrived. • event text – Text associated with event 46 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 11.3 Lenel intercom event Lenel OnGuard intercom event. • ID – The ID that uniquely identifies the type of this event. • panel – The name of the panel where this event originated. • device – The name of the device where this event originated. • secondary device – The ID of the secondary device where this event origi- nated. • intercom data – Additional data for the intercom event that occurred. • line number – The line number involved in the intercom event. • type – Event type i.e., duress, system, etc. • subtype – Event sub-type i.e., granted, door forced open, etc. • description – A human readable, brief description of this event. • serial number – A number that uniquely identifies the instance of the event for a particular panel. • time stamp – Time stamp. • server host – Host name of the Communication server through which the event arrived. • event text – Text associated with event 11.4 Lenel raw data Lenel OnGuard raw data. • time stamp – Time stamp. • data – Lenel OnGuard data. 11.5 Lenel refresh names Lenel OnGuard refresh names. This action has no parameters. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 47 GEUTEBRUCK 11.6 Lenel security event Lenel OnGuard security event. • ID – The ID that uniquely identifies the type of this event. • panel – The name of the panel where this event originated. • device – The name of the device where this event originated. • secondary device – The ID of the secondary device where this event origi- nated. • type – Event type i.e., duress, system, etc. • subtype – Event sub-type i.e., granted, door forced open, etc. • description – A human readable, brief description of this event. • serial number – A number that uniquely identifies the instance of the event for a particular panel. • time stamp – Time stamp. • server host – Host name of the Communication server through which the event arrived. • event text – Text associated with event 11.7 Lenel video event Lenel OnGuard video event. • ID – The ID that uniquely identifies the type of this event. • panel – The name of the panel where this event originated. • device – The name of the device where this event originated. • secondary device – The ID of the secondary device where this event origi- nated. • channel – The physical channel the camera is connected to that is creating this event. • type – Event type i.e., duress, system, etc. • subtype – Event sub-type i.e., granted, door forced open, etc. • description – A human readable, brief description of this event. • serial number – A number that uniquely identifies the instance of the event for a particular panel. • time stamp – Time stamp. • start stamp – The time the video event started • end time – The time the video event ended. • server host – Host name of the Communication server through which the event arrived. • event text – Text associated with event 48 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 12 POS POS (point of sale). 12.1 Barcode data Barcode data. • scanner – Scanner name. • time stamp – Time stamp. • code – Barcode. 12.2 Filling pump status Filling pump status. • terminal – Terminal name. • time stamp – Time stamp. • pump no – Pump no. • status – Status. • amount – Amount. • price – Price. • details – Details. 12.3 Interface raw answer Interface raw answer. • interface – Interface name. • time stamp – Time stamp. • answer – Interface answer. 12.4 Interface raw data Interface raw data. • interface – Interface name. • time stamp – Time stamp. • data – Interface data. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 49 GEUTEBRUCK 12.5 POS data POS data. • POS – POS name. • time stamp – Time stamp. • article – Article description. • price – Price. • units – Number of units. • price per unit – Price per unit. • line 1 – Line 1. • line 2 – Line 2. • line 3 – Line 3. • line 4 – Line 4. • line 5 – Line 5. 12.6 POS status POS status. • POS – POS name. • time stamp – Time stamp. • status – Status. • details – Details. 12.7 Terminal article data Terminal article data. • terminal – Terminal name. • time stamp – Time stamp. • cashier station – Cashier station. • pump no – Pump no. • alarm – Alarm status. • amount – Amount. • price – Price. • details – Details. 50 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 12.8 Terminal payment data Terminal payment data. • terminal – Terminal name. • time stamp – Time stamp. • cashier station – Cashier station. • pump no – Pump no. • alarm – Alarm status. • amount – Amount. • price – Price. • details – Details. 13 Perimeter protection Perimeter protection. 13.1 PP device alarm Perimeter protection device alarm. • interface id – Interface ID. • device address – Device address. • sensor – Sensor. • state – State. 13.2 PP device input Perimeter protection device input. • interface id – Interface ID. • device address – Device address. • input – Input. • state – State. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 51 GEUTEBRUCK 13.3 PP device offline Perimeter protection device offline. • interface id – Interface ID. • device address – Device address. 13.4 PP device online Perimeter protection device online. • interface id – Interface ID. • device address – Device address. 13.5 PP interface offline Perimeter protection interface offline. • interface id – Interface ID. 13.6 PP interface online Perimeter protection interface online. • interface id – Interface ID. 13.7 PP query interface Perimeter protection query interface. • interface id – Interface ID. 13.8 PP set device output Perimeter protection set device output. • interface id – Interface ID. • device address – Device address. • output – Output. • state – State. 52 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 13.9 PP subcell alarm Perimeter protection subcell alarm. • interface id – Interface ID. • device address – Device address. • cable – Cable. • subcell – Subcell. • state – State. 13.10 PP zone alarm Perimeter protection zone alarm. • zone id – Zone ID. • interface id – Interface ID. • device address – Device address. • cable – Cable. • subcell – Subcell. • state – State. 14 Remote export Remote export. 14.1 Cancel export Cancel export. • export GUID – Export GUID. • abort flag – Abort flag. 14.2 Export finished Export finished. • export GUID – Export GUID. • success – Success. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 53 GEUTEBRUCK 14.3 Export progress Export progress. • export GUID – Export GUID. • progress – Progress. 14.4 Initialize remote export Initialize remote export. • viewer – Global viewer or viewer client no. • device GUID – Pilot device GUID. 14.5 Set export marker Set export marker. • viewer – Global viewer or viewer client no. • marker – Marker kind. 14.6 Start remote export Start remote export. • export GUID – Export GUID. • device GUID – Pilot device GUID. • format – Backup format. • channel – Channel. • start time – Start time. • end time – End time. • job ID – Job ID. 14.7 Start scene store Start scene store. • scene store GUID – Scene store GUID. • cut-list – Cut-list. • pre-history length – Pre-history length. • recording length – Recording length. 54 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 15 SKIDATA SKIDATA messages. 15.1 SKIDATA control SKIDATA control information. • interface – Interface name. • state – Interface state. 15.2 SKIDATA device event SKIDATA device event. • interface – Interface name. • device – Device ID. • event code – Event code. 15.3 SKIDATA entry SKIDATA entry. • interface – Interface name. • message – Message code. • transaction – Transcaction ID. • car park – Car park no. • device – Device ID. 15.4 SKIDATA exit SKIDATA exit. • interface – Interface name. • message – Message code. • transaction – Transcaction ID. • car park – Car park no. • device – Device ID. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 55 GEUTEBRUCK 15.5 SKIDATA transaction SKIDATA transaction. • interface – Interface name. • message – Message code. • transaction – Transcaction ID. • car park – Car park no. • device – Device ID. 16 Supply chain security Supply chain security. 16.1 GSCS vehicle access denied GSCS vehicle access denied. • sequence ID – The sequence ID. • plate no. – Recognized plate no. • time stamp – Time stamp. • company category – Company category. • company name – Company name. • reason – Reason. • traffic lane – Traffic lane. • channel – Channel. • direction – Direction. 16.2 GSCS vehicle access expired GSCS vehicle access expired. • sequence ID – The sequence ID. • plate no. – Recognized plate no. • time stamp – Time stamp. • expiring time – Expiring time. • company category – Company category. 56 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK • company name – Company name. • reason – Reason. • traffic lane – Traffic lane. • channel – Channel. • direction – Direction. 16.3 GSCS vehicle access granted GSCS vehicle access granted. • sequence ID – The sequence ID. • plate no. – Recognized plate no. • time stamp – Time stamp. • company category – Company category. • company name – Company name. • reason – Reason. • traffic lane – Traffic lane. • channel – Channel. • direction – Direction. 16.4 GSCS vehicle access pending GSCS vehicle access pending. • sequence ID – The sequence ID. • plate no. – Recognized plate no. • time stamp – Time stamp. • company category – Company category. • company name – Company name. • reason – Reason. • traffic lane – Traffic lane. • channel – Channel. • direction – Direction. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 57 GEUTEBRUCK 16.5 Log NPR recognition Log NPR recognition. • plate no. – Recognized plate no. • hash value – Hash value. • country – Country. • channel – Channel. • time stamp – Time stamp. • restriction – Restriction of recognized number. • category – Category of recognized number. 16.6 Log barcode data Logistic barcode data. • barcode – Barcode. • hash value – Hash value. • scanner name – Scanner name or IP address. • area number – Area number. • area name – Area name. • channel – Channel. • time stamp – Time stamp. • order number – Order number. • shipment number – Shipment number. • item number – Item number. 16.7 Log barcode data LPS Logistic barcode and LPS data. • barcode – Barcode. • hash value – Hash value. • scanner name – Scanner name or IP address. • area number – Area number. • area name – Area name. • channel – Channel. 58 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK • time stamp – Time stamp. • X coordinate – X coordinate. • Y coordinate – Y coordinate. • Z coordinate – Z coordinate. • LPS tag ID – LPS tag ID. • LPS status – LPS status. • LPS cell ID – LPS cell ID. • LPS area ID – LPS area ID. • user param – User param. • order number – Order number. • shipment number – Shipment number. • item number – Item number. 17 System actions All actions describing system behaviour. 17.1 Blocking filter activate Blocking filter activate. • filter – Blocking filter. 17.2 Blocking filter deactivate Blocking filter deactivate. • filter – Blocking filter. 17.3 Custom action This action has no side effects and can be used for customer purposes. • INT parameter – Numeric parameter. • STRING parameter – Literal parameter. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 59 GEUTEBRUCK 17.4 Database recording info per ring Database recording info per ring. • database ring – Database ring. • no video recording – Video is recording or not. • no audio recording – Audio is recording or not. • no recording – Video and/or audio is recording or not. • video samples/s – Video samples per second. • video samples MB/s – Video MB per second. • audio samples/s – Audio samples per second. • audio samples MB/s – Audio MB per second. • write wait % – Write waiting times in percent. • ring capacity – Ring capacity. • oldest item – Time stamp of the oldest item. • recording depth – Recording depth in hours. • estimated required capacity – Estimated required capacity. 17.5 Database recording info total Database recording info total. • no video recording – Video is recording or not. • no audio recording – Audio is recording or not. • no recording – Video and/or audio is recording or not. • video samples/s – Video samples per second. • video samples MB/s – Video MB per second. • audio samples/s – Audio samples per second. • audio samples MB/s – Audio MB per second. • write wait % – Write waiting times in percent. • total capacity – Total capacity. • free capacity – Free capacity. • allocated capacity – Allocated capacity. • oldest item – Time stamp of the oldest item. • recording depth – Recording depth in hours. • estimated required capacity – Estimated required capacity. • required capacity factor – Required capacity factor. • required capacity available – Required capacity available. 60 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 17.6 Database started This action will be fired at the database start-up. • status – Database status message. • total size – Database total size. 17.7 Event recording changed Event recording settings are changed. • instance ID – Instance ID of the event. • event type – Type of the event. 17.8 Event started Event has started. • instance ID – Instance ID of the event. • event type – Type of the event. • foreign key – Optional foreign key used to start the alarm. 17.9 Event stopped Event has stopped. • instance ID – Instance ID of the event. • event type – Type of the event. 17.10 FRC notification FRC notification. • notification – Notification reason. • param – Additional parameter. • description – Optional notification text. • additional info – Optional additional info (usually as XML string). GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 61 GEUTEBRUCK 17.11 GEMOS alarm GEMOS alarm notification. • GEMOS key – GEMOS alarm key. • GEMOS int – GEMOS alarm integer parameter. • GEMOS str – GEMOS alarm string parameter. 17.12 IP switch operation IP switch operation. • operation – Operation. • port no – Port no, IP address, MAC address. • parameter – Optional parameter. 17.13 Kill all events Kill all active events. This action has no parameters. 17.14 Kill event Kill event. • event type – Type of the event. 17.15 Kill event by instance Kill event by instance ID. • instance ID – Instance ID of the event. 17.16 Live check This action will be fired every 10 seconds and is intended for use as live check. • counter – This is the number of already fired live check actions. • time stamp – Current server time. 62 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 17.17 Redundant power failure This action is notified if a failure of the redundant power supply is detected. This action has no parameters. 17.18 Redundant power ok This action is notified if a failure of the redundant power supply is removed. This action has no parameters. 17.19 SMRP viewer cleared SMRP viewer cleared. This action has no parameters. 17.20 SMRP viewer connected SMRP viewer connected to the camera. • server – Server name. • channel – Channel. 17.21 SMTP mail This action will send a user defined email if GSCMail is connected • subject – Mail subject. • to – Mail recipients. • cc – Carbon copy recipients. • body – Mail body. • channel – Channel. 17.22 Set clock Set clock. • current time – Current time. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 63 GEUTEBRUCK 17.23 Set watchdog Set watchdog. • timeout – Timeout in seconds, before the watchdog must be retriggered and before the hardware watchdog will set the hardware contact. 17.24 Setup changed Setup changed. • user name – Name of the user who modified the setup. • remote host – Host from where the connection was done. • current time – Current time. • resource kind – Modified resource kind. • resource ID – Modified resource ID. • change kind – Change kind. • details – Details of the modification. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 17.25 Setup upload progress Setup upload progress. • first user – Name of the user who modified the setup. • second user – Name of the second user by four eyes authentication. • remote host – Host from where the connection was done. • progress % – Progress in percent. • current time – Current stage time. 17.26 Start event Start event. • event type – Type of the event. • foreign key – Optional foreign key used to store with alarm. 64 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 17.27 Stop all events Stop all active events. This action has no parameters. 17.28 Stop event Stop event. • event type – Type of the event. 17.29 Stop event by instance Stop event by instance ID. • instance ID – Instance ID of the event. 17.30 System error Notify system error. • source subsystem – Source of the message. • message code – Kind of the message. • Windows error code – Optional Windows error code. • description – Optional description of the message. • additional info – Optional additional info (usually as XML string). 17.31 System info Notify system information. • source subsystem – Source of the message. • message code – Kind of the message. • description – Optional description of the message. • additional info – Optional additional info (usually as XML string). GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 65 GEUTEBRUCK 17.32 System settings changed Setup of the system and/or the current time range changed. • setup changed – System setup has changed. • first user – Name of the user who modified the setup. • second user – Name of the second user by four eyes authentication. • remote host – Host from where the connection was done. • time range changed – Time range has changed. • current time range – Currently active time range. • licence changed – Licence has changed. • change time – Time of the system settings changed. 17.33 System started This action will be fired only once at the system start-up. • start time – Time of the system start-up. 17.34 System terminating This action will be fired when the system is going to be shut down. • stop time – Time of the system shutdown. • Windows shutdown – Indicates whether the system shutdown is done due to the windows shutdown. 17.35 System warning Notify system warning. • source subsystem – Source of the message. • message code – Kind of the message. • Windows error code – Optional Windows error code. • description – Optional description of the message. • additional info – Optional additional info (usually as XML string). 66 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 17.36 Transfer binary buffer Transfer binary buffer. • internal handle – Internal handle. • parameter – Parameter. 17.37 Transfer binary channel buffer Transfer binary channel buffer. • channel – Channel. • internal handle – Internal handle. • parameter – Parameter. 17.38 User login This action will be fired when the user has connected to the system. • first user – Name of the user connected to the system. • second user – Name of the second user by four eyes authentication. • remote host – Host from where the connection is done. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 17.39 User login failed This action will be fired when the user has tried to connect to the system but was rejected. • first user – Name of the user who tried to connect to the system. • second user – Name of the second user by four eyes authentication. • remote host – Host from where the connection is done. • reject reason – Reason of the rejection. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 67 GEUTEBRUCK 17.40 User logout This action will be fired when the user has disconnected from the system. • first user – Name of the user disconnected from the system. • second user – Name of the second user by four eyes authentication. • remote host – Host from where the connection was done. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 18 Video control All actions to control the video streams, also all notifications about the state change of the video streams. 18.1 Activate external process Activate external process. • channel – Channel. • time stamp – Time stamp. • external system – External system to activate. 18.2 CPA measurement CPA measurement. • channel – Channel. • correlation – Correlation factor. 18.3 Change AD parameter set This action changes the current AD parameter set of the video channel. • channel – Channel. • AD parameter set – The name of the new AD parameter set. 68 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.4 Change CPA parameter set This action changes the current CPA parameter set of the video channel. • channel – Channel. • CPA parameter set – The name of the new CPA parameter set. 18.5 Change GTectVMX parameter set This action changes the current GTectVMX parameter set of the video channel. • channel – Channel. • GTect parameter set – The name of the new GTect parameter set. 18.6 Change OBTRACK parameter set This action changes the current OBTRACK parameter set of the video channel. • channel – Channel. • OBTRACK parameter set – The name of the new OBTRACK parameter set. 18.7 Change VMD parameter set This action changes the current VMD parameter set of the video channel. • channel – Channel. • VMD parameter set – The name of the new VMD parameter set. 18.8 Change camera profile This action changes the current camera profile of the hardware module. • hardware – Hardware module. • profile – The name of the camera profile. 18.9 Channel error Notify channel error. • channel – Channel. • sensor type – Sensor type. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 69 GEUTEBRUCK • source subsystem – Source of the message. • message code – Kind of the message. • Windows error code – Optional Windows error code. • description – Optional description of the message. • additional info – Optional additional info (usually as XML string). 18.10 Channel info Notify channel information. • channel – Channel. • sensor type – Sensor type. • source subsystem – Source of the message. • message code – Kind of the message. • description – Optional description of the message. • additional info – Optional additional info (usually as XML string). 18.11 Channel live check This action notifies that the channel is alive. • channel – Channel. • sensor type – Sensor type. • time stamp – Time stamp. 18.12 Channel warning Notify channel warning. • channel – Channel. • sensor type – Sensor type. • source subsystem – Source of the message. • message code – Kind of the message. • Windows error code – Optional Windows error code. • description – Optional description of the message. • additional info – Optional additional info (usually as XML string). 70 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.13 Enable client VCA Enable client VCA • channel – Channel. • VCA Type – VCA Type • enabled – Enabled 18.14 G-Tect analytics live check This action will be fired periodically to ensure that analytics client is still running. This action has no parameters. 18.15 G-Tect scene alarm This action will be fired when G-Tect Video content analysis detects a scene alarm. • channel – Channel. • alarm reason – Alarm reason. 18.16 G-Tect scene alarm finished This action will be fired when G-Tect Video content analysis scene alarm is fin- ished. • channel – Channel. • alarm reason – Alarm reason. 18.17 G-Tect/Dual sensor alarm This action will be fired when G-Tect/Dual sensor detects an alarm. • channel – Channel. • sterile zone number – Sterile Zone Number • virtual fence number – Virtual Fence Number. • VMD alarm group – VMD alarm group. • VMD zone – VMD zone nr. • VMD cycle – VMD measure cycle. • alarm area – Alarm area. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 71 GEUTEBRUCK 18.18 G-Tect/Dual sensor alarm finished This action will be fired when the alarm is finished. • channel – Channel. 18.19 G-Tect/VMX alarm This action will be fired when G-Tect/VMX Video content analysis detects an alarm. • channel – Channel. • sterile zone number – Sterile Zone Number • virtual fence number – Virtual Fence Number. • group zones or fences – Used to group different Zones or fences to the same level. • internal track ID – Internal Track ID. • alarm area – Alarm area. 18.20 G-Tect/VMX alarm finished This action will be fired when the alarm is finished. • channel – Channel. 18.21 IAS settings changed IAS settings changed. • channel – Channel. • sensor type – Sensor type. 18.22 IP camera failover notification IP camera failover notification. • primary server – The name of the primary server. • secondary server – The name of the secondary server. • primary channel – Primary channel. • secondary channel – Secondary channel. • camera parameters – Optional camera parameters. 72 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.23 IP camera failover restore IP camera failover restore. • primary server – The name of the primary server. • secondary server – The name of the secondary server. • primary channel – Primary channel. • secondary channel – Secondary channel. • camera parameters – Optional camera parameters. 18.24 IP camera raw command This action sends a special command to the IP camera. • url – Complete command URL (like http://192.168.0.165:80/set?daynight=night). • user – User name to authenticate by the camera (optional). • password – Password to authenticate by the camera (optional). • post – POST parameters (optional, separate lines with r n). 18.25 Make CPA reference image Make CPA reference image. • channel – Channel. 18.26 Media channel setup Media channel setup info. • channel – Channel. • time stamp – Time stamp. • parameter – Parameter. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 73 GEUTEBRUCK 18.27 NPR raw data NPR raw data. • plate no. – Recognized plate no. • country – Country. • channel – Channel. • time stamp – Time stamp. • zone rect – Zone rectangle. • weight – Weight of recognition. • zone state – Zone state. • zone status – Zone status. • speed – Speed in km/h • direction – Direction of the motion. • zone index – Zone index. • best – Current recognition is best. • plate width – Plate width. • plate height – Plate height. • plate angle – Plate angle. • symbol height – Symbol height. • type – Number type. 18.28 NPR recognition NPR recognition. • plate no. – Recognized plate no. • country – Country. • channel – Channel. • time stamp – Time stamp. • zone rect – Zone rectangle. • restriction – Restriction of recognized number. • category – Category of recognized number. • speed – Speed in km/h • direction – Direction of the motion. • zone index – Zone index. • type – Number type. • weight – Weight of recognition. 74 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.29 OBTRACK channel counter OBTRACK channel counter. • channel – Channel. • counter type – Counter type. • counter value – Counter value. • object direction – Object direction. • time stamp – Time stamp. • reset time stamp – Reset time stamp. 18.30 OBTRACK channel counter threshold OBTRACK channel counter threshold. • channel – Channel. • counter type – Counter type. • counter value – Counter value. • exceeding direction – Exceeding direction. • time stamp – Time stamp. 18.31 OBTRACK channel set counter OBTRACK channel set counter. • channel – Channel. • counter type – Counter type. • counter value – Counter value. • time stamp – Time stamp. 18.32 OBTRACK frame raw data OBTRACK frame raw data. • time stamp – Time stamp. • channel – Channel. • brightness – Brightness. • contrast – Contrast. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 75 GEUTEBRUCK 18.33 OBTRACK group counter OBTRACK group counter. • group ID – Group ID. • counter type – Counter type. • counter value – Counter value. • object direction – Object direction. • time stamp – Time stamp. • reset time stamp – Reset time stamp. • group name – Group name. 18.34 OBTRACK group counter threshold OBTRACK group counter threshold. • group ID – Group ID. • counter type – Counter type. • counter value – Counter value. • exceeding direction – Exceeding direction. • time stamp – Time stamp. • group name – Group name. 18.35 OBTRACK group set counter OBTRACK group set counter. • group ID – Group ID. • counter type – Counter type. • counter value – Counter value. • time stamp – Time stamp. • group name – Group name. 76 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.36 OBTRACK object raw data OBTRACK object raw data. • time stamp – Time stamp. • channel – Channel. • area no – Area no. • object ID – Object ID. • object status – Object status. • object class – Object class. • confidence – Confidence. • position – Position. • speed – Speed. • duration – Duration. • direction – Direction. • object size – Object size. • object width – Object width in meters. • object height – Object height in meters. • process size – Process size. • GSC net name – GeViScope network name. 18.37 OBTRACK tunnel alarm OBTRACK tunnel alarm notification. • channel – Channel. • time stamp – Time stamp. • alarm reason – Alarm reason. • object ID – Object ID. • alarm area ID – Alarm area ID. • object area – Object area. 18.38 Sensor alarm finished This action will be fired when the alarm is finished. • channel – Channel. • sensor type – Sensor type. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 77 GEUTEBRUCK 18.39 Sensor inhibit alarm finished This action will be fired when the inhibit alarm is finished. • channel – Channel. • sensor type – Sensor type. 18.40 Sensor inhibit video alarm This action will be fired when the motion in inhibit area is detected. • channel – Channel. • sensor type – Sensor type. • AD alarm area – AD alarm area. • AD cell – AD cell nr. • VMD alarm group – VMD alarm group. • VMD zone – VMD zone nr. • VMD cycle – VMD measure cycle. • alarm area – Alarm area. • object class – OBTRACK object class. 18.41 Sensor video alarm This action will be fired when video alarm is detected. • channel – Channel. • sensor type – Sensor type. • AD alarm area – AD alarm area. • AD cell – AD cell nr. • VMD alarm group – VMD alarm group. • VMD zone – VMD zone nr. • VMD cycle – VMD measure cycle. • alarm area – Alarm area. • object class – OBTRACK object class. 78 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.42 Set system time Set system time. • time stamp – Time stamp. 18.43 Set test picture mode Enable or disable test picture generator. • channel – Channel. • enable – Enable or disable test picture generator. 18.44 VCA set armed Send this action to notify VCA to be armed or disarmed. • Channel – Channel. • Sensor type – Sensor type. • Armed (true) or disarmed (false) – Armed (true) or disarmed (false) 18.45 VCA status answer This action will be sent in response to VCA status request. • Channel – Channel. • Sensor type – Sensor type. • Armed (true) or disarmed (false) – Armed (true) or disarmed (false) 18.46 VCA status request Send this action to request status of VCA. As response VCA will send VCA status answer. • Channel – Channel. • Sensor type – Sensor type. 18.47 Video contrast detected This action will be fired when the contrast is detected in the video signal. • channel – Channel. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 79 GEUTEBRUCK 18.48 Video contrast failed This action will be fired when the contrast is lost in the video signal. • channel – Channel. 18.49 Video set image brightness Video set image brightness. • channel – Channel. • sensor type – Sensor type. • brightness – Brightness. 18.50 Video set image contrast Video set image contrast. • channel – Channel. • sensor type – Sensor type. • contrast – Contrast. 18.51 Video set image saturation Video set image saturation. • channel – Channel. • sensor type – Sensor type. • saturation – Saturation. 18.52 Video source has changed This action indicates the changes on the video input source. • channel – Channel. • signal norm – New signal norm. • signal type – New signal type. • interlace type – New interlace type. 80 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 18.53 Video sync detected This action will be fired when the sync is detected in the video signal. • channel – Channel. 18.54 Video sync failed This action will be fired when the sync is lost in the video signal. • channel – Channel. 19 Viewer actions All actions for viewer customizing. 19.1 VC alarm queue confirm Confirm alarm from the queue on the viewer client. • viewer – Global viewer or viewer client no. • selection mode – Selection mode. 19.2 VC alarm queue confirm by instance Confirm alarm from the queue on the viewer client. • viewer – Global viewer or viewer client no. • instance ID – Instance ID of the alarm. 19.3 VC alarm queue confirm by type Confirm alarm of specific type from the queue on the viewer client. • viewer – Global viewer or viewer client no. • event type – Type of the event. • selection mode – Selection mode. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 81 GEUTEBRUCK 19.4 VC alarm queue remove Remove alarm from the queue on the viewer client. • viewer – Global viewer or viewer client no. • selection mode – Selection mode. 19.5 VC alarm queue remove by instance Remove alarm from the queue on the viewer client. • viewer – Global viewer or viewer client no. • instance ID – Instance ID of the alarm. 19.6 VC alarm queue remove by type Remove alarm of specific type from the queue on the viewer client. • viewer – Global viewer or viewer client no. • event type – Type of the event. • selection mode – Selection mode. 19.7 VC alarm queue select Select alarm from the queue on the viewer client. • viewer – Global viewer or viewer client no. • selection mode – Selection mode. 19.8 VC alarm queue select by instance Select alarm from the queue on the viewer client. • viewer – Global viewer or viewer client no. • instance ID – Instance ID of the alarm. 19.9 VC alarm queue select by type Select alarm of specific type from the queue on the viewer client. • viewer – Global viewer or viewer client no. • event type – Type of the event. • selection mode – Selection mode. 82 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 19.10 VC change scene by name Viewer client change scene by name. • viewer – Global viewer or viewer client no. • scene – Scene name. 19.11 VC clear scene by name Viewer client clear scene by name. • viewer – Global viewer or viewer client no. • scene – Scene name. 19.12 VC full mode Viewer client full mode. • viewer – Global viewer or viewer client no. • full mode – Switch viewer client in full mode. • sensitive area enabled – Sensitive area enabled. 19.13 VC set audio level Viewer client set audio level. • viewer – Global viewer or viewer client no. • audio level – Audio level in range 0 (audio off) till 100 (max. volume). 19.14 VC show viewer text Viewer client show viewer text. • viewer – Global viewer or viewer client no. • show text – Show text in viewer client. 19.15 VC stretch mode Viewer client stretch mode. • viewer – Global viewer or viewer client no. • stretch mode – Switch viewer client in stretch mode. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 83 GEUTEBRUCK 19.16 Viewer change scene Viewer change scene. • viewer – Global viewer or viewer client no. 19.17 Viewer change sync audio/video Viewer change sync audio/video. • viewer – Global viewer or viewer client no. • enable sync – Enable audio/video sync. 19.18 Viewer clear Clear viewer. • viewer – Global viewer or viewer client no. 19.19 Viewer clear scene Viewer clear scene. • viewer – Global viewer or viewer client no. 19.20 Viewer clear text output Clear text output in the given viewer. • viewer – Global viewer or viewer client no. 19.21 Viewer connect Connect camera to the viewer. • viewer – Global viewer or viewer client no. • channel – Channel. • play mode – Viewer play mode. 84 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 19.22 Viewer connect live Connect live camera to the viewer. • viewer – Global viewer or viewer client no. • channel – Channel. 19.23 Viewer export picture Viewer export picture. • viewer – Global viewer or viewer client no. • file path – File path (local or UNC). GSCView default path is used if left empty. 19.24 Viewer jump by time Viewer jump by time. • viewer – Global viewer or viewer client no. • channel – Channel. • play mode – Viewer play mode. • time in sec – Time to jump in seconds. Use negative values to jump in past. 19.25 Viewer maximize Viewer maximize. • viewer – Global viewer or viewer client no. • maximize – Maximize. 19.26 Viewer play from time Viewer play from time. • viewer – Global viewer or viewer client no. • channel – Channel. • play mode – Viewer play mode. • time – Time to play from. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 85 GEUTEBRUCK 19.27 Viewer print picture Viewer print picture. • viewer – Global viewer or viewer client no. 19.28 Viewer select Select viewer. • viewer – Global viewer or viewer client no. 19.29 Viewer set play mode Set play mode of the viewer. • viewer – Global viewer or viewer client no. • play mode – Viewer play mode. • play speed – Optional play speed parameter. 19.30 Viewer show alarm by instance Show alarm in viewer using alarm instance ID. • viewer – Global viewer or viewer client no. • instance ID – Instance ID of the alarm. • play mode – Viewer alarm’s play mode. 19.31 Viewer show alarm by key Show alarm in viewer using alarm foreign key. • viewer – Global viewer or viewer client no. • foreign key – Foreign key used to start the alarm. • play mode – Viewer alarm’s play mode. 86 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 19.32 Viewer show alarm by type Show alarm in viewer using alarm type and optional foreign key. • viewer – Global viewer or viewer client no. • alarm type – Type of the alarm. • foreign key – Foreign key used to start the alarm. • play mode – Viewer alarm’s play mode. 19.33 Viewer text output Display free string in the given viewer. • viewer – Global viewer or viewer client no. • text string – Text string to display. 20 Viewer notifications All viewer notifications. 20.1 Image export notification Notification on export or print of channel images. • user – Name of the user connected to the system. • destination – Destination. • destination type – Destination type. • time stamp – Time stamp. • end time – End time. • channels – Channels. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 87 GEUTEBRUCK 20.2 Scene store modification Scene store modification. • viewer – Global viewer or viewer client no. • scene store GUID – Scene store GUID. • scene store name – Scene store name. • time stamp – Time stamp. • modification type – Modification type. • user – Name of the user. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 20.3 VC alarm queue notification Alarm queue notification on the viewer client. • viewer – Global viewer or viewer client no. • notification – Alarm state notification. • instance ID – Instance ID of the alarm. • event type – Type of the event. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 20.4 VC scene changed Viewer client scene changed. • viewer – Global viewer or viewer client no. • scene – Scene name. 20.5 Viewer cleared Viewer cleared. • viewer – Global viewer or viewer client no. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 88 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK 20.6 Viewer connected Viewer connected to the camera. • viewer – Global viewer or viewer client no. • channel – Channel. • play mode – Viewer play mode. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 20.7 Viewer play mode changed Viewer play mode changed. • viewer – Global viewer or viewer client no. • channel – Channel. • play mode – Viewer play mode. • channel time – Channel time. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. 20.8 Viewer selection changed Viewer selection was changed. • viewer – Global viewer or viewer client no. • channel – Channel. • play mode – Viewer play mode. • client host – Host from where the connection is done. • client type – Client type. • client account – User account from where the connection is done. GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 89 GEUTEBRUCK A Examples The following list contains the example notation of all GEVISCOPE actions. If the action has some optional parameters, then the notation without them is also given in the third line. Following numeric values used in this: 64 for 64 bit integer numbers, 32 for 32 bit integer numbers, 1 for boolean values, and 0 for enumeration types. ABCConnect ("address") ABCDisconnect () ABCPlayFile (64, "file name", 1) AbortAllAutoBackups () AbortAutoBackup ("schedule") ACSAccessDenied ("ACS", ACSNo: 32, Account: 64, BancCode: 64, CardNo: "card no", TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", Reason: 32) ACSAccessDenied ("ACS") ACSAccessGranted ("ACS", ACSNo: 32, Account: 64, BancCode: 64, CardNo: "card no", TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00") ACSAccessGranted ("ACS") ACSRawAnswer ("ACS", "2013/09/05 14:59:59,999 GMT+02:00", "answer") ACSRawData ("ACS", "2013/09/05 14:59:59,999 GMT+02:00", "data") ActivateExternalProcess (32, "2013/09/05 14:59:59,999 GMT+02:00", 0) ATMRawAnswer ("ATM", "2013/09/05 14:59:59,999 GMT+02:00", "answer") ATMRawData ("ATM", "2013/09/05 14:59:59,999 GMT+02:00", "data") ATMTransaction ("ATM", 1, 32, ATMNo: 32, Account: 64, BancCode: 64, CardNo: "card no", TAN1: 64, TAN2: 64, TimeStamp1: "2013/09/05 14:59:59,999 GMT+02:00", TimeStamp2: "2013/09/05 14:59:59,999 GMT+02:00", Amount: 0.0, Currency: "currency") ATMTransaction ("ATM", 1, 32) AutoBackupCapacityMonitoringCapacityWarning (0, "destination", 64, 64, 64, 32, 32, 32) AutoBackupCapacityMonitoringFileAutoDeleted (0, "destination", 64, 64, 64, 32, 32, 32, 64, "file name") AutoBackupCapacityMonitoringOutOfDiskSpace (0, "destination", 64, 64, 64, 32, 32, 32) AutoBackupFileDone ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", 90 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, 32, "file name", 64) AutoBackupFileDone ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, 32, "file name", 64) AutoBackupFileProgress ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, 32, "file name", 64) AutoBackupFileProgress ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, 32, "file name", 64) AutoBackupFileStarted ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, 32, "file name") AutoBackupFileStarted ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, 32, "file name") AutoBackupOperationDone ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64, OperationErrorCode: 32) AutoBackupOperationDone ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64) AutoBackupOperationStarted ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64) AutoBackupOperationStarted ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1, 32, "2013/09/05 14:59:59,999 GMT+02:00", "source", "destination", 64, 64) AutoBackupScheduleDone ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1) AutoBackupScheduleDone ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1) AutoBackupScheduleStarted ("schedule", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1) AutoBackupScheduleStarted ("schedule", "2013/09/05 14:59:59,999 GMT+02:00", GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 91 GEUTEBRUCK 32, 1) AutoFocusOff (32) AutoFocusOn (32) BackupEvent (64, "event type", "destination", StartHintID: 64, StopHintID: 64, Subfolder: "sub folder") BackupEvent (64, "event type", "destination") BarcodeData ("scanner", "2013/09/05 14:59:59,999 GMT+02:00", "code") BlockingFilterActivate ("filter") BlockingFilterDeactivate ("filter") CameraApplyProfile (32, "profile") CameraBacklightCompensationMode (32, 0) CameraClearPrePosText (32, 32) CameraDayNightMode (32, 0) CameraLightOff (32) CameraLightOn (32) CameraManualIrisOff (32) CameraManualIrisOn (32) CameraOff (32) CameraOn (32) CameraPumpOff (32) CameraPumpOn (32) CameraRAWOutput (32, "output") CameraSelectCharMode (32, 32) CameraSetPrePosText (32, 32) CameraSpecFuncUOff (32) CameraSpecFuncUOn (32) CameraSpecFuncVOff (32) CameraSpecFuncVOn (32) CameraSpecFuncXOff (32) CameraSpecFuncXOn (32) CameraSpecFuncYOff (32) CameraSpecFuncYOn (32) CameraStopAll (32) CameraTextOff (32) CameraTextOn (32) CameraTourStart (32, 32, "tour name") CameraTourStop (32) 92 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK CameraVersionOff (32) CameraVersionOn (32) CameraWashOff (32) CameraWashOn (32) CancelExport ("00000000-0000-0000-0000-000000000000", 0) CaseClosed () CaseOpened () ChangeADParameterSet (32, "AD parameter set") ChangeCameraProfile ("hardware", "profile") ChangeCPAParameterSet (32, "CPA parameter set") ChangeGTectParameterSet (32, "GTect parameter set") ChangeObtrackParameterSet (32, "OBTRACK parameter set") ChangeVMDParameterSet (32, "VMD parameter set") ChannelError (32, SensorType: 0, 0, 0, WindowsError: 32, Description: "description", XMLInfo: "additional info") ChannelError (32, 0, 0) ChannelInfo (32, SensorType: 0, 0, 0, Description: "description", XMLInfo: "additional info") ChannelInfo (32, 0, 0) ChannelLiveCheck (32, 0, "2013/09/05 14:59:59,999 GMT+02:00") ChannelWarning (32, SensorType: 0, 0, 0, WindowsError: 32, Description: "description", XMLInfo: "additional info") ChannelWarning (32, 0, 0) CPAMeasurement (32, 32) CustomAction (64, "STRING parameter") DatabaseRecordingInfoRing (0, 1, 1, 1, 0.0, 0.0, 0.0, 0.0, 0.0, 64, "2013/09/05 14:59:59,999 GMT+02:00", RecordingDepth: 0.0, EstimatedRequiredCapacity: 64) DatabaseRecordingInfoRing (0, 1, 1, 1, 0.0, 0.0, 0.0, 0.0, 0.0, 64, "2013/09/05 14:59:59,999 GMT+02:00") DatabaseRecordingInfoTotal (1, 1, 1, 0.0, 0.0, 0.0, 0.0, 0.0, 64, 64, 64, OldestItem: "2013/09/05 14:59:59,999 GMT+02:00", RecordingDepth: 0.0, EstimatedRequiredCapacity: 64, RequiredCapacityFactor: 0.0, RequiredCapacityAvailable: 1) DatabaseRecordingInfoTotal (1, 1, 1, 0.0, 0.0, 0.0, 0.0, 0.0, 64, 64, 64) DatabaseStarted (0, 64) DefaultPosCallUp (32) DefaultPosClear (32) GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 93 GEUTEBRUCK DefaultPosSave (32) DeviceFound ("device type", "device name", "serial ID") DeviceNewFirmware ("device type", "device name", "serial ID", "firmware serial") DevicePluginError (32, "device type", SubType: "device subtype", "device name", "serial ID", 0, ErrorCode: 32, Description: "description") DevicePluginError (32, "device type", "device name", "serial ID", 0) DevicePluginState (32, "device type", SubType: "device subtype", "device name", "serial ID", 0, InternalState: 32, Description: "description") DevicePluginState (32, "device type", "device name", "serial ID", 0) DeviceReattached ("device type", "device name", "serial ID") DeviceRemoved ("device type", "device name", "serial ID") DigitalInput (32, 0) EventBackupDone ("00000000-0000-0000-0000-000000000000", "event type", 64, "destination", 64, 64, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", OperationErrorCode: 32) EventBackupDone ("00000000-0000-0000-0000-000000000000", "event type", 64, "destination", 64, 64, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00") EventBackupFileDone ("00000000-0000-0000-0000-000000000000", "event type", 64, "destination", 64, 64, "2013/09/05 14:59:59,999 GMT+02:00", 32, "file name", 64) EventBackupFileProgress ("00000000-0000-0000-0000-000000000000", "event type", 64, "destination", 64, 64, "2013/09/05 14:59:59,999 GMT+02:00", 32, "file name", 64) EventBackupFileStarted ("00000000-0000-0000-0000-000000000000", "event type", 64, "destination", 64, 64, "2013/09/05 14:59:59,999 GMT+02:00", 32, "file name") EventBackupStarted ("00000000-0000-0000-0000-000000000000", "event type", 64, "destination", 64, 64, "2013/09/05 14:59:59,999 GMT+02:00") EventRecordingChanged (64, "event type") EventStarted (64, "event type", ForeignKey: 64) EventStarted (64, "event type") EventStopped (64, "event type") ExportFinished ("00000000-0000-0000-0000-000000000000", 0) ExportProgress ("00000000-0000-0000-0000-000000000000", 32) 94 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK FastSpeedOff (32) FastSpeedOn (32) FillingPumpStatus ("terminal", "2013/09/05 14:59:59,999 GMT+02:00", 32, 0, Amount: 0.0, Price: 0.0, Details: "details") FillingPumpStatus ("terminal", "2013/09/05 14:59:59,999 GMT+02:00", 32, 0) FocusFar (32, 32) FocusNear (32, 32) FocusStop (32) FRCNotification (0, Param: 32, Description: "description", XMLInfo: "additional info") FRCNotification (0) GEMOSalarm (64, 32, "GEMOS str") GSCSVehicleAccessDenied (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory: "company category", CompanyName: "company name", Reason: "reason", TrafficLane: "traffic lane", Channel: 32, Direction: 0) GSCSVehicleAccessDenied (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00") GSCSVehicleAccessExpired (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory: "company category", CompanyName: "company name", Reason: "reason", TrafficLane: "traffic lane", Channel: 32, Direction: 0) GSCSVehicleAccessExpired (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00") GSCSVehicleAccessGranted (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory: "company category", CompanyName: "company name", Reason: "reason", TrafficLane: "traffic lane", Channel: 32, Direction: 0) GSCSVehicleAccessGranted (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00") GSCSVehicleAccessPending (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00", CompanyCategory: "company category", CompanyName: "company name", Reason: "reason", TrafficLane: "traffic lane", Channel: 32, Direction: 0) GSCSVehicleAccessPending (32, "plate no.", "2013/09/05 14:59:59,999 GMT+02:00") GTectAnalyticsLiveCheck () GTectDualSensorAlarm (32, SterileZoneNumber: 32, VirtualFenceNumber: 32, VMDGroup: 0, VMDZone: 32, VMDCycle: 0, AlarmArea: { 0, 0, 0, 0 }) GTectDualSensorAlarm (32) GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 95 GEUTEBRUCK GTectDualSensorAlarmFinished (32) GTectSceneAlarm (32, 0) GTectSceneAlarmFinished (32, 0) GTectVMXAlarm (32, SterileZoneNumber: 32, VirtualFenceNumber: 32, AlarmGroup: 32, TrackID: 32, AlarmArea: { 0, 0, 0, 0 }) GTectVMXAlarm (32) GTectVMXAlarmFinished (32) IASSettingsChanged (32, 0) ImageExportNotification ("user", "destination", 0, "2013/09/05 14:59:59,999 GMT+02:00", TimeEnd: "2013/09/05 14:59:59,999 GMT+02:00", "channels", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") ImageExportNotification ("user", "destination", 0, "2013/09/05 14:59:59,999 GMT+02:00", "channels") ImexCapacityFileAutoDeleted (0, "destination", 64, 64, 64, 32, 32, 32, 64, 32) ImexCapacityOutOfDiskSpace (0, "destination", 64, 64, 64, 32, 32, 32) ImexCapacityWarning (0, "destination", 64, 64, 64, 32, 32, 32) ImexExportEventImage (64, "event type", Destination: "destination", FilePath: "file name") ImexExportEventImage (64, "event type") ImexExportImageFromDB (32, Destination: "destination", FilePath: "file name", PictureTime: "2013/09/05 14:59:59,999 GMT+02:00") ImexExportImageFromDB (32) ImexExportImageFromLiveStream (32, Destination: "destination", FilePath: "file name") ImexExportImageFromLiveStream (32) InitializeRemoteExport (32, "00000000-0000-0000-0000-000000000000") InterfaceRawAnswer ("interface", "2013/09/05 14:59:59,999 GMT+02:00", "answer") InterfaceRawData ("interface", "2013/09/05 14:59:59,999 GMT+02:00", "data") IOI43ResetMainboard () IOI43Temperature ("ID", 32) IOI43WDActivate () IOI43WDDeactivate () IOI43WDTrigger () IPCameraRawCommand ("url", User: "user", Password: "password", POST: "post") 96 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK IPCameraRawCommand ("url") IPCamFailoverNotification ("primary server", "secondary server", 32, 32, CameraParameters: "camera parameters") IPCamFailoverNotification ("primary server", "secondary server", 32, 32) IPCamFailoverRestore ("primary server", "secondary server", 32, 32, CameraParameters: "camera parameters") IPCamFailoverRestore ("primary server", "secondary server", 32, 32) IPSwitchOperation (0, "port no", Param: 32) IPSwitchOperation (0, "port no") IrisClose (32) IrisOpen (32) IrisStop (32) KeyPressed (0) KeyReleased (0) KillAllEvents () KillEvent ("event type") KillEventByID (64) LenelAccessEvent (ID: 0, Panel: "panel", Device: "device", SecondaryDevice: 32, CardNumber: 64, AccessResult: 0, Type: 0, SubType: 32, "description", SerialNumber: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", AreaEnteredID: 32, AreaExitedID: 32, AssetID: "asset ID", CardholderEntered: 1, Duress: 1, ElevatorFloor: 32, FacilityCode: 32, IsReadableCard: 1, IssueCode: 32, CommServerHostName: "server host", EventText: "event text") LenelAccessEvent ("description") LenelFireEvent (ID: 0, Panel: "panel", Device: "device", SecondaryDevice: 32, TroubleCode: 32, Type: 0, SubType: 32, "description", SerialNumber: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", CommServerHostName: "server host", EventText: "event text") LenelFireEvent ("description") LenelIntercomEvent (ID: 0, Panel: "panel", Device: "device", SecondaryDevice: 32, IntercomData: 32, LineNumber: 32, Type: 0, SubType: 32, "description", SerialNumber: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", CommServerHostName: "server host", EventText: "event text") LenelIntercomEvent ("description") LenelRawData ("2013/09/05 14:59:59,999 GMT+02:00", "data") LenelRefreshNames () GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 97 GEUTEBRUCK LenelSecurityEvent (ID: 0, Panel: "panel", Device: "device", SecondaryDevice: 32, Type: 0, SubType: 32, "description", SerialNumber: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", CommServerHostName: "server host", EventText: "event text") LenelSecurityEvent ("description") LenelVideoEvent (ID: 0, Panel: "panel", Device: "device", SecondaryDevice: 32, Channel: 32, Type: 0, SubType: 32, "description", SerialNumber: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", StartTime: "2013/09/05 14:59:59,999 GMT+02:00", EndTime: "2013/09/05 14:59:59,999 GMT+02:00", CommServerHostName: "server host", EventText: "event text") LenelVideoEvent ("description") LiveCheck (64, "2013/09/05 14:59:59,999 GMT+02:00") LogBarcodeData ("barcode", Hash: 64, Scanner: "scanner name", AreaID: 64, AreaName: "area name", Channel: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", Order: "order number", Shipment: "shipment number", Item: "item number") LogBarcodeData ("barcode") LogBarcodeDataLPS ("barcode", Hash: 64, Scanner: "scanner name", AreaID: 64, AreaName: "area name", Channel: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", X: 0.0, Y: 0.0, Z: 0.0, LpsTagID: 32, LpsStatus: 0, LpsCellID: 32, LpsAreaID: 32, UserParam: 32, Order: "order number", Shipment: "shipment number", Item: "item number") LogBarcodeDataLPS ("barcode") LogNPRRecognition ("plate no.", Hash: 64, Country: "country", Channel: 32, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", Restriction: 0, Category: "category") LogNPRRecognition ("plate no.") LPSPositionData (32, ScannerID: "scanner ID", 64, 64, Z: 64, Latitude: 0.0, Longitude: 0.0, 32, CellID: 32, 0, TimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", Data: "data", AreaName: "area name") LPSPositionData (32, 64, 64, 32, 0) LPSQueryPosition (32, ScannerID: "scanner ID", Data: "data") LPSQueryPosition (32) MakeCPAReferenceImage (32) MediaChannelSetupInfo (32, "2013/09/05 14:59:59,999 GMT+02:00", "parameter") MoveToAbsolutePosition (32, 0.0, 0.0, 0.0, 0.0) MoveToBySpeed (32, 0.0, 0.0) 98 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK MoveToRelativePosition (32, 0.0, 0.0, 0.0, 0.0) NPRRawData ("plate no.", "country", 32, "2013/09/05 14:59:59,999 GMT+02:00", { 0, 0, 0, 0 }, 32, 32, 32, 32, 32, 32, 1, 32, 32, 32, 32, "type") NPRRecognition ("plate no.", "country", 32, "2013/09/05 14:59:59,999 GMT+02:00", { 0, 0, 0, 0 }, 0, "category", 32, 32, 32, "type", 32) ObtrackChannelCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00", ResetTimeStamp: "2013/09/05 14:59:59,999 GMT+02:00") ObtrackChannelCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00") ObtrackChannelCounterThreshold (32, 0, 64, 0, "2013/09/05 14:59:59,999 GMT+02:00") ObtrackChannelSetCounter (32, 0, 64, "2013/09/05 14:59:59,999 GMT+02:00") ObtrackFrameRawData ("2013/09/05 14:59:59,999 GMT+02:00", 32, 32, 32) ObtrackGroupCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00", ResetTimeStamp: "2013/09/05 14:59:59,999 GMT+02:00", GroupName: "group name") ObtrackGroupCounter (32, 0, 64, 32, "2013/09/05 14:59:59,999 GMT+02:00") ObtrackGroupCounterThreshold (32, 0, 64, 0, "2013/09/05 14:59:59,999 GMT+02:00", GroupName: "group name") ObtrackGroupCounterThreshold (32, 0, 64, 0, "2013/09/05 14:59:59,999 GMT+02:00") ObtrackGroupSetCounter (32, 0, 64, "2013/09/05 14:59:59,999 GMT+02:00", GroupName: "group name") ObtrackGroupSetCounter (32, 0, 64, "2013/09/05 14:59:59,999 GMT+02:00") ObtrackObjectRawData ("2013/09/05 14:59:59,999 GMT+02:00", 32, 32, 32, 0, 0, Confidence: 32, Position: { 0, 0, 0, 0 }, Speed: 0.0, Duration: 32, Direction: 32, Size: 0.0, ObjectWidth: 0.0, ObjectHeight: 0.0, ProcessSize: 0, GscNetName: "GSC net name") ObtrackObjectRawData ("2013/09/05 14:59:59,999 GMT+02:00", 32, 32, 32, 0, 0) ObtrackTunnelAlarm (32, "2013/09/05 14:59:59,999 GMT+02:00", 0, 32, 32, ObjectArea: { 0, 0, 0, 0 }) ObtrackTunnelAlarm (32, "2013/09/05 14:59:59,999 GMT+02:00", 0, 32, 32) PanAuto (32, 32) PanLeft (32, 32) PanRight (32, 32) PanStop (32) POSData ("POS", "2013/09/05 14:59:59,999 GMT+02:00", Article: "article", Price: 0.0, Units: 32, PricePerUnit: 0.0, Line1: "line 1", Line2: "line 2", Line3: "line 3", Line4: "line 4", Line5: "line 5") GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 99 GEUTEBRUCK POSData ("POS", "2013/09/05 14:59:59,999 GMT+02:00") POSStatus ("POS", "2013/09/05 14:59:59,999 GMT+02:00", 0, Details: "details") POSStatus ("POS", "2013/09/05 14:59:59,999 GMT+02:00", 0) PPDeviceAlarm ("interface id", 32, 0, 0) PPDeviceInput ("interface id", 32, 32, 0) PPDeviceOffline ("interface id", 32) PPDeviceOnline ("interface id", 32) PPInterfaceOffline ("interface id") PPInterfaceOnline ("interface id") PPQueryInterface ("interface id") PPSetDeviceOutput ("interface id", 32, 32, 0) PPSubcellAlarm ("interface id", 32, 0, 32, 0) PPZoneAlarm ("zone id", "interface id", 32, Cable: 0, Subcell: 32, 0) PPZoneAlarm ("zone id", "interface id", 32, 0) PrePosCallUp (32, 32) PrePosClear (32, 32) PrePosSave (32, 32) RedundantPowerFailure () RedundantPowerOk () ResetMainboard () SafebagClose (32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, Debit: 0.0, Total: 0.0, Difference: 0.0, HasDifference: 1, Notes: "notes", Coins: "coins", Cheques: "cheques") SafebagClose (32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0) SafebagData (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, Debit: 0.0, Total: 0.0, Difference: 0.0, HasDifference: 1, Notes: "notes", Coins: "coins", Cheques: "cheques") SafebagData (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0) SafebagOpen (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0) SafebagPassingOfRiskData (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, 32, 32, TourNumber: 32, TargetWorkingPlace: "target working place", PassingOfRiskType: "passing of risk type") SafebagPassingOfRiskData (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, 32, 32) 100 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK SafebagPassingOfRiskStart (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, 32, 32, TourNumber: 32, TargetWorkingPlace: "target working place", PassingOfRiskType: "passing of risk type") SafebagPassingOfRiskStart (32, "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, 32, 32) SafebagPassingOfRiskStop (32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, 32, 32, TourNumber: 32, TargetWorkingPlace: "target working place", PassingOfRiskType: "passing of risk type") SafebagPassingOfRiskStop (32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "safebag no.", "safebag info", 0, 32, 32) SceneStoreModification (32, "00000000-0000-0000-0000-000000000000", "scene store name", "2013/09/05 14:59:59,999 GMT+02:00", 0, "user", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") SceneStoreModification (32, "00000000-0000-0000-0000-000000000000", "scene store name", "2013/09/05 14:59:59,999 GMT+02:00", 0, "user") SensorAlarmFinished (32, 0) SensorAudioAlarm (32) SensorInhibitAlarmFinished (32, 0) SensorInhibitVideoAlarm (32, 0, ADArea: 0, ADCell: 32, VMDGroup: 0, VMDZone: 32, VMDCycle: 0, AlarmArea: { 0, 0, 0, 0 }, ObjectClass: 0) SensorInhibitVideoAlarm (32, 0) SensorVideoAlarm (32, 0, ADArea: 0, ADCell: 32, VMDGroup: 0, VMDZone: 32, VMDCycle: 0, AlarmArea: { 0, 0, 0, 0 }, ObjectClass: 0) SensorVideoAlarm (32, 0) SetCameraText (32, "text") SetClientVCA (32, 0, 1) SetClock ("2013/09/05 14:59:59,999 GMT+02:00") SetDigitalOutput (32, 0) SetExportMarker (32, 0) SetLED (0, 0) SetLEDBlink (0, 32, 32) SetSystemTime ("2013/09/05 14:59:59,999 GMT+02:00") SetTestPictureMode (32, 1) SetupChanged ("user name", "remote host", "2013/09/05 14:59:59,999 GMT+02:00", 0, "resource ID", 0, Details: "details", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") SetupChanged ("user name", "remote host", GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 101 GEUTEBRUCK "2013/09/05 14:59:59,999 GMT+02:00", 0, "resource ID", 0) SetupUploadProgress (User1: "first user", User2: "second user", Host: "remote host", 32, "2013/09/05 14:59:59,999 GMT+02:00") SetupUploadProgress (32, "2013/09/05 14:59:59,999 GMT+02:00") SetWatchdog (32) SkidataControl ("interface", 0) SkidataDeviceEvent ("interface", 32, 32) SkidataEntry ("interface", 0, "transaction", 32, 32) SkidataExit ("interface", 0, "transaction", 32, 32) SkidataTransaction ("interface", 0, "transaction", 32, 32) SMRPViewerCleared () SMRPViewerConnected ("server", 32) SMTPMailSend ("subject", "to", "cc", "body", Channel: 32) SMTPMailSend ("subject", "to", "cc", "body") StartAutoBackup ("schedule") StartEvent ("event type", ForeignKey: 64) StartEvent ("event type") StartRemoteExport ("00000000-0000-0000-0000-000000000000", "00000000-0000-0000-0000-000000000000", 0, 32, "2013/09/05 14:59:59,999 GMT+02:00", "2013/09/05 14:59:59,999 GMT+02:00", "job ID") StartSceneStore ("00000000-0000-0000-0000-000000000000", "cut-list", 64, 64) StopAllEvents () StopEvent ("event type") StopEventByID (64) SystemError (0, 0, WindowsError: 32, Description: "description", XMLInfo: "additional info") SystemError (0, 0) SystemInfo (0, 0, Description: "description", XMLInfo: "additional info") SystemInfo (0, 0) SystemSettingsChanged (1, User1: "first user", User2: "second user", Host: "remote host", 1, TimeRange: "current time range", 1, "2013/09/05 14:59:59,999 GMT+02:00") SystemSettingsChanged (1, 1, 1, "2013/09/05 14:59:59,999 GMT+02:00") SystemStarted ("2013/09/05 14:59:59,999 GMT+02:00") SystemTerminating ("2013/09/05 14:59:59,999 GMT+02:00", 1) SystemWarning (0, 0, WindowsError: 32, Description: "description", XMLInfo: "additional info") 102 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK SystemWarning (0, 0) Temperature (0, "ID", 32) TerminalArticleData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00", 32, PumpNo: 32, 1, Amount: 0.0, Price: 0.0, Details: "details") TerminalArticleData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1) TerminalPaymentData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00", 32, PumpNo: 32, 1, Amount: 0.0, Price: 0.0, Details: "details") TerminalPaymentData ("terminal", "2013/09/05 14:59:59,999 GMT+02:00", 32, 1) TiltDown (32, 32) TiltStop (32) TiltUp (32, 32) TransferBinaryBuffer ("00000000-0000-0000-0000-000000000000", "parameter") TransferBinaryChannelBuffer (32, "00000000-0000-0000-0000-000000000000", "parameter") UserLogin ("first user", User2: "second user", "remote host", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") UserLogin ("first user", "remote host") UserLoginFailed ("first user", User2: "second user", "remote host", 0, ClientHost: "client host", ClientType: 0, ClientAccount: "client account") UserLoginFailed ("first user", "remote host", 0) UserLogout ("first user", User2: "second user", "remote host", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") UserLogout ("first user", "remote host") VCAlarmQueueConfirm (32, 0) VCAlarmQueueConfirmByInstance (32, 64) VCAlarmQueueConfirmByType (32, "event type", 0) VCAlarmQueueNotification (32, 0, 64, "event type", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") VCAlarmQueueNotification (32, 0, 64, "event type") VCAlarmQueueRemove (32, 0) VCAlarmQueueRemoveByInstance (32, 64) VCAlarmQueueRemoveByType (32, "event type", 0) VCAlarmQueueSelect (32, 0) VCAlarmQueueSelectByInstance (32, 64) VCAlarmQueueSelectByType (32, "event type", 0) GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 103 GEUTEBRUCK VCASetArmed (32, 0, 1) VCAStatusAnswer (32, 0, 1) VCAStatusRequest (32, 0) VCChangeSceneByName (32, "scene") VCClearSceneByName (32, "scene") VCFullMode (32, 1, 1) VCSceneChanged (32, "scene") VCSetAudioLevel (32, 32) VCShowViewerText (32, 1) VCStretchMode (32, 1) VideoContrastDetected (32) VideoContrastFailed (32) VideoSetImageBrightness (32, 0, 32) VideoSetImageContrast (32, 0, 32) VideoSetImageSaturation (32, 0, 32) VideoSourceChanged (32, 0, 0, 0) VideoSyncDetected (32) VideoSyncFailed (32) ViewerChangeScene (32) ViewerClear (32) ViewerCleared (32, ClientHost: "client host", ClientType: 0, ClientAccount: "client account") ViewerCleared (32) ViewerClearScene (32) ViewerClearTextOutput (32) ViewerConnect (32, 32, 0) ViewerConnected (32, 32, 0, ClientHost: "client host", ClientType: 0, ClientAccount: "client account") ViewerConnected (32, 32, 0) ViewerConnectLive (32, 32) ViewerExportPicture (32, "file path") ViewerJumpByTime (32, 32, 0, 32) ViewerMaximize (32, 1) ViewerPlayFromTime (32, 32, 0, "2013/09/05 14:59:59,999 GMT+02:00") ViewerPlayModeChanged (32, 32, 0, ChannelTime: "2013/09/05 14:59:59,999 GMT+02:00", ClientHost: "client host", ClientType: 0, ClientAccount: "client account") ViewerPlayModeChanged (32, 32, 0) ViewerPrintPicture (32) 104 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK ViewerSelect (32) ViewerSelectionChanged (32, 32, 0, ClientHost: "client host", ClientType: 0, ClientAccount: "client account") ViewerSelectionChanged (32, 32, 0) ViewerSetPlayMode (32, 0, 32) ViewerShowAlarmByInstance (32, 64, 0) ViewerShowAlarmByKey (32, 64, 0) ViewerShowAlarmByType (32, "alarm type", ForeignKey: 64, 0) ViewerShowAlarmByType (32, "alarm type", 0) ViewerSyncAudioAndVideo (32, 1) ViewerTextOutput (32, "text string") WatchdogActivate () WatchdogDeactivate () WatchdogTrigger () ZoomIn (32, 32) ZoomOut (32, 32) ZoomStop (32) GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 105 GEUTEBRUCK 106 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK Index Action classes, 15 Activate external process, 68 ATM/ACS, 16 ATM raw answer, 17 Audio control, 18 ATM raw data, 17 Backup actions, 19 ATM transaction, 18 Camera control, 26 Auto backup capacity file auto deleted, 19 Cash management actions, 35 Auto backup capacity out of disk Device information, 38 space, 20 Digital contacts, 40 Auto backup capacity warning, 20 Imex, 42 Auto backup file done, 21 LPS, 44 Auto backup file progress, 21 Lenel, 45 Auto backup file started, 22 Supply chain security, 56 Auto backup operation done, 22 POS, 49 Auto backup operation started, 23 Perimeter protection, 51 Auto backup schedule done, 23 Remote export, 53 Auto backup schedule started, 23 SKIDATA, 55 Auto focus off, 26 System actions, 59 Auto focus on, 26 Video control, 68 Backup event, 24 Viewer notifications, 87 Barcode data, 49 Viewer actions, 81 Blocking filter activate, 59 Actions by name Blocking filter deactivate, 59 ABC connect, 18 Camera apply profile, 26 ABC disconnect, 18 Camera backlight compensation ABC play file, 19 mode, 26 Abort all auto backups, 19 Camera clear preset text, 27 Abort auto backup, 19 Camera day/night mode, 27 ACS access denied, 16 Camera light off, 27 ACS access granted, 17 Camera light on, 27 ACS raw answer, 17 Camera manual iris off, 27 ACS raw data, 17 Camera manual iris on, 27 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 107 GEUTEBRUCK Camera off, 27 Channel error, 69 Camera on, 28 Channel info, 70 Camera pump off, 28 Channel live check, 70 Camera pump on, 28 Channel warning, 70 Camera RAW output, 26 Clear default position, 31 Camera select char mode, 28 Clear preset position, 31 Camera set preset text, 28 CPA measurement, 68 Camera spec func U off, 28 Custom action, 59 Camera spec func U on, 28 Database recording info per ring, 60 Camera spec func V off, 29 Database recording info total, 60 Camera spec func V on, 29 Database started, 61 Camera spec func X off, 29 Device found, 38 Camera spec func X on, 29 Device plugin error, 38 Camera spec func Y off, 29 Device plugin state, 39 Camera spec func Y on, 29 Device reattached, 39 Camera stop all, 29 Device removed, 39 Camera text off, 30 Digital input, 40 Camera text on, 30 Enable client VCA, 71 Camera tour start, 30 Event backup done, 24 Camera tour stop, 30 Event backup file done, 24 Camera version off, 30 Event backup file progress, 25 Camera version on, 30 Event backup file started, 25 Camera wash-wipe off, 30 Event backup started, 25 Camera wash-wipe on, 31 Event recording changed, 61 Cancel export, 53 Event started, 61 Case has been closed, 40 Event stopped, 61 Case has been opened, 40 Export finished, 53 Change AD parameter set, 68 Export progress, 54 Change camera profile, 69 Fast speed off, 31 Change CPA parameter set, 69 Fast speed on, 31 Change GTectVMX parameter set, Filling pump status, 49 69 Focus far, 31 Change OBTRACK parameter set, 69 Focus near, 31 Change VMD parameter set, 69 Focus stop, 32 108 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK FRC notification, 61 Iris close, 32 G-Tect analytics live check, 71 Iris open, 32 G-Tect scene alarm, 71 Iris stop, 32 G-Tect scene alarm finished, 71 Key pressed, 41 G-Tect/Dual sensor alarm, 71 Key released, 41 G-Tect/Dual sensor alarm finished, Kill all events, 62 72 Kill event, 62 G-Tect/VMX alarm, 72 Kill event by instance, 62 G-Tect/VMX alarm finished, 72 Lenel access event, 45 GEMOS alarm, 62 Lenel fire event, 46 GSCS vehicle access denied, 56 Lenel intercom event, 47 GSCS vehicle access expired, 56 Lenel raw data, 47 GSCS vehicle access granted, 57 Lenel refresh names, 47 GSCS vehicle access pending, 57 Lenel security event, 48 IAS settings changed, 72 Lenel video event, 48 Image export notification, 87 Live check, 62 Imex capacity file auto deleted, 43 Log barcode data, 58 Imex capacity out of disk space., 43 Log barcode data LPS, 58 Imex capacity warning, 43 Log NPR recognition, 58 Imex export event image, 44 LPS position data, 44 Imex export image from DB, 44 LPS query position, 45 Imex export image from live stream, Make CPA reference image, 73 44 Media channel setup, 73 Initialize remote export, 54 Move by speed, 32 Interface raw answer, 49 Move to absolute position, 32 Interface raw data, 49 Move to default position, 33 IOI43 reset mainboard, 40 Move to preset position, 33 IOI43 temperature notification, 40 Move to relative position, 33 IOI43 watchdog activate, 40 New firmware received, 39 IOI43 watchdog deactivate, 41 NPR raw data, 74 IOI43 watchdog trigger, 41 NPR recognition, 74 IP camera failover notification, 72 OBTRACK channel counter, 75 IP camera failover restore, 73 OBTRACK channel counter thresh- IP camera raw command, 73 old, 75 IP switch operation, 62 OBTRACK channel set counter, 75 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 109 GEUTEBRUCK OBTRACK frame raw data, 75 Sensor alarm finished, 77 OBTRACK group counter, 76 Sensor audio alarm, 19 OBTRACK group counter thresh- Sensor inhibit alarm finished, 78 old, 76 Sensor inhibit video alarm, 78 OBTRACK group set counter, 76 Sensor video alarm, 78 OBTRACK object raw data, 77 Set camera text, 34 OBTRACK tunnel alarm, 77 Set clock, 63 Pan auto, 33 Set digital output, 41 Pan left, 33 Set export marker, 54 Pan right, 33 Set system LED, 41 Pan stop, 34 Set system LED to blink, 42 POS data, 50 Set system time, 79 POS status, 50 Set test picture mode, 79 PP device alarm, 51 Set watchdog, 64 PP device input, 51 Setup changed, 64 PP device offline, 52 Setup upload progress, 64 PP device online, 52 SKIDATA control, 55 PP interface offline, 52 SKIDATA device event, 55 PP interface online, 52 SKIDATA entry, 55 PP query interface, 52 SKIDATA exit, 55 PP set device output, 52 PP subcell alarm, 53 SKIDATA transaction, 56 PP zone alarm, 53 SMRP viewer cleared, 63 Redundant power failure, 63 SMRP viewer connected, 63 Redundant power ok, 63 SMTP mail, 63 Reset mainboard, 41 Start auto backup, 26 Safebag close, 35 Start event, 64 Safebag data, 36 Start remote export, 54 Safebag open, 36 Start scene store, 54 Safebag passing of risk data, 37 Stop all events, 65 Safebag passing of risk start, 37 Stop event, 65 Safebag passing of risk stop, 37 Stop event by instance, 65 Save default position, 34 System error, 65 Save preset position, 34 System info, 65 Scene store modification, 88 System settings changed, 66 110 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK System started, 66 VCA set armed, 79 System terminating, 66 VCA status answer, 79 System warning, 66 VCA status request, 79 Temperature notification, 42 Video contrast detected, 79 Terminal article data, 50 Video contrast failed, 80 Terminal payment data, 51 Video set image brightness, 80 Tilt down, 34 Video set image contrast, 80 Tilt stop, 34 Video set image saturation, 80 Tilt up, 35 Video source has changed, 80 Transfer binary buffer, 67 Video sync detected, 81 Transfer binary channel buffer, 67 Video sync failed, 81 User login, 67 Viewer change scene, 84 User login failed, 67 Viewer change sync audio/video, 84 User logout, 68 Viewer clear, 84 VC alarm queue confirm, 81 Viewer clear scene, 84 VC alarm queue confirm by in- stance, 81 Viewer clear text output, 84 VC alarm queue confirm by type, Viewer cleared, 88 81 Viewer connect, 84 VC alarm queue notification, 88 Viewer connect live, 85 VC alarm queue remove, 82 Viewer connected, 89 VC alarm queue remove by in- Viewer export picture, 85 stance, 82 Viewer jump by time, 85 VC alarm queue remove by type, 82 Viewer maximize, 85 VC alarm queue select, 82 Viewer play from time, 85 VC alarm queue select by instance, Viewer play mode changed, 89 82 Viewer print picture, 86 VC alarm queue select by type, 82 Viewer select, 86 VC change scene by name, 83 Viewer selection changed, 89 VC clear scene by name, 83 Viewer set play mode, 86 VC full mode, 83 Viewer show alarm by instance, 86 VC scene changed, 88 Viewer show alarm by key, 86 VC set audio level, 83 Viewer show alarm by type, 87 VC show viewer text, 83 Viewer text output, 87 VC stretch mode, 83 Watchdog activate, 42 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 111 GEUTEBRUCK Watchdog deactivate, 42 BlockingFilterActivate, 59 Watchdog trigger, 42 BlockingFilterDeactivate, 59 Zoom in, 35 CameraApplyProfile, 26 Zoom out, 35 CameraBacklightCompensation- Mode, 26 Zoom stop, 35 CameraClearPrePosText, 27 Actions by shortcut CameraDayNightMode, 27 ABCConnect, 18 CameraLightOff, 27 ABCDisconnect, 18 CameraLightOn, 27 ABCPlayFile, 19 CameraManualIrisOff, 27 AbortAllAutoBackups, 19 CameraManualIrisOn, 27 AbortAutoBackup, 19 CameraOff, 27 ACSAccessDenied, 16 ACSAccessGranted, 17 CameraOn, 28 ACSRawAnswer, 17 CameraPumpOff, 28 ACSRawData, 17 CameraPumpOn, 28 ActivateExternalProcess, 68 CameraRAWOutput, 26 ATMRawAnswer, 17 CameraSelectCharMode, 28 ATMRawData, 17 CameraSetPrePosText, 28 ATMTransaction, 18 CameraSpecFuncUOff, 28 AutoBackupCapacityMonitoringCa- CameraSpecFuncUOn, 28 pacityWarning, 20 CameraSpecFuncVOff, 29 AutoBackupCapacityMonitoring- CameraSpecFuncVOn, 29 FileAutoDeleted, 19 CameraSpecFuncXOff, 29 AutoBackupCapacityMoni- toringOutOfDiskSpace, 20 CameraSpecFuncXOn, 29 AutoBackupFileDone, 21 CameraSpecFuncYOff, 29 AutoBackupFileProgress, 21 CameraSpecFuncYOn, 29 AutoBackupFileStarted, 22 CameraStopAll, 29 AutoBackupOperationDone, 22 CameraTextOff, 30 AutoBackupOperationStarted, 23 CameraTextOn, 30 AutoBackupScheduleDone, 23 CameraTourStart, 30 AutoBackupScheduleStarted, 23 CameraTourStop, 30 AutoFocusOff, 26 CameraVersionOff, 30 AutoFocusOn, 26 CameraVersionOn, 30 BackupEvent, 24 CameraWashOff, 30 BarcodeData, 49 CameraWashOn, 31 112 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK CancelExport, 53 EventStarted, 61 CaseClosed, 40 EventStopped, 61 CaseOpened, 40 ExportFinished, 53 ChangeADParameterSet, 68 ExportProgress, 54 ChangeCameraProfile, 69 FastSpeedOff, 31 ChangeCPAParameterSet, 69 FastSpeedOn, 31 ChangeGTectParameterSet, 69 FillingPumpStatus, 49 ChangeObtrackParameterSet, 69 FocusFar, 31 ChangeVMDParameterSet, 69 FocusNear, 31 ChannelError, 69 FocusStop, 32 ChannelInfo, 70 FRCNotification, 61 ChannelLiveCheck, 70 GEMOSalarm, 62 ChannelWarning, 70 GSCSVehicleAccessDenied, 56 CPAMeasurement, 68 GSCSVehicleAccessExpired, 56 CustomAction, 59 GSCSVehicleAccessGranted, 57 DatabaseRecordingInfoRing, 60 GSCSVehicleAccessPending, 57 DatabaseRecordingInfoTotal, 60 GTectAnalyticsLiveCheck, 71 DatabaseStarted, 61 GTectDualSensorAlarm, 71 DefaultPosCallUp, 33 GTectDualSensorAlarmFinished, 72 DefaultPosClear, 31 GTectSceneAlarm, 71 DefaultPosSave, 34 GTectSceneAlarmFinished, 71 DeviceFound, 38 GTectVMXAlarm, 72 DeviceNewFirmware, 39 GTectVMXAlarmFinished, 72 DevicePluginError, 38 IASSettingsChanged, 72 DevicePluginState, 39 ImageExportNotification, 87 DeviceReattached, 39 ImexCapacityFileAutoDeleted, 43 DeviceRemoved, 39 ImexCapacityOutOfDiskSpace, 43 DigitalInput, 40 ImexCapacityWarning, 43 EventBackupDone, 24 ImexExportEventImage, 44 EventBackupFileDone, 24 ImexExportImageFromDB, 44 EventBackupFileProgress, 25 ImexExportImageFromLiveStream, EventBackupFileStarted, 25 44 EventBackupStarted, 25 InitializeRemoteExport, 54 EventRecordingChanged, 61 InterfaceRawAnswer, 49 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 113 GEUTEBRUCK InterfaceRawData, 49 MoveToBySpeed, 32 IOI43ResetMainboard, 40 MoveToRelativePosition, 33 IOI43Temperature, 40 NPRRawData, 74 IOI43WDActivate, 40 NPRRecognition, 74 IOI43WDDeactivate, 41 ObtrackChannelCounter, 75 IOI43WDTrigger, 41 ObtrackChannelCounterThreshold, 75 IPCameraRawCommand, 73 ObtrackChannelSetCounter, 75 IPCamFailoverNotification, 72 ObtrackFrameRawData, 75 IPCamFailoverRestore, 73 ObtrackGroupCounter, 76 IPSwitchOperation, 62 ObtrackGroupCounterThreshold, IrisClose, 32 76 IrisOpen, 32 ObtrackGroupSetCounter, 76 IrisStop, 32 ObtrackObjectRawData, 77 KeyPressed, 41 ObtrackTunnelAlarm, 77 KeyReleased, 41 PanAuto, 33 KillAllEvents, 62 PanLeft, 33 KillEvent, 62 PanRight, 33 KillEventByID, 62 PanStop, 34 LenelAccessEvent, 45 POSData, 50 LenelFireEvent, 46 POSStatus, 50 LenelIntercomEvent, 47 PPDeviceAlarm, 51 LenelRawData, 47 PPDeviceInput, 51 LenelRefreshNames, 47 PPDeviceOffline, 52 LenelSecurityEvent, 48 PPDeviceOnline, 52 LenelVideoEvent, 48 PPInterfaceOffline, 52 LiveCheck, 62 PPInterfaceOnline, 52 LogBarcodeData, 58 PPQueryInterface, 52 LogBarcodeDataLPS, 58 PPSetDeviceOutput, 52 LogNPRRecognition, 58 PPSubcellAlarm, 53 LPSPositionData, 44 PPZoneAlarm, 53 LPSQueryPosition, 45 PrePosCallUp, 33 MakeCPAReferenceImage, 73 PrePosClear, 31 MediaChannelSetupInfo, 73 PrePosSave, 34 MoveToAbsolutePosition, 32 RedundantPowerFailure, 63 114 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 GEUTEBRUCK RedundantPowerOk, 63 StartAutoBackup, 26 ResetMainboard, 41 StartEvent, 64 SafebagClose, 35 StartRemoteExport, 54 SafebagData, 36 StartSceneStore, 54 SafebagOpen, 36 StopAllEvents, 65 SafebagPassingOfRiskData, 37 StopEvent, 65 SafebagPassingOfRiskStart, 37 StopEventByID, 65 SafebagPassingOfRiskStop, 37 SystemError, 65 SceneStoreModification, 88 SystemInfo, 65 SensorAlarmFinished, 77 SystemSettingsChanged, 66 SensorAudioAlarm, 19 SystemStarted, 66 SensorInhibitAlarmFinished, 78 SystemTerminating, 66 SensorInhibitVideoAlarm, 78 SystemWarning, 66 SensorVideoAlarm, 78 Temperature, 42 SetCameraText, 34 TerminalArticleData, 50 SetClientVCA, 71 TerminalPaymentData, 51 SetClock, 63 TiltDown, 34 SetDigitalOutput, 41 TiltStop, 34 SetExportMarker, 54 TiltUp, 35 SetLED, 41 TransferBinaryBuffer, 67 SetLEDBlink, 42 TransferBinaryChannelBuffer, 67 SetSystemTime, 79 UserLogin, 67 SetTestPictureMode, 79 UserLoginFailed, 67 SetupChanged, 64 UserLogout, 68 SetupUploadProgress, 64 VCAlarmQueueConfirm, 81 SetWatchdog, 64 VCAlarmQueueConfirmByIn- stance, 81 SkidataControl, 55 VCAlarmQueueConfirmByType, 81 SkidataDeviceEvent, 55 VCAlarmQueueNotification, 88 SkidataEntry, 55 SkidataExit, 55 VCAlarmQueueRemove, 82 SkidataTransaction, 56 VCAlarmQueueRemoveByIn- stance, 82 SMRPViewerCleared, 63 VCAlarmQueueRemoveByType, SMRPViewerConnected, 63 82 SMTPMailSend, 63 VCAlarmQueueSelect, 82 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013 115 GEUTEBRUCK VCAlarmQueueSelectByInstance, ViewerSelect, 86 82 ViewerSelectionChanged, 89 VCAlarmQueueSelectByType, 82 ViewerSetPlayMode, 86 VCASetArmed, 79 ViewerShowAlarmByInstance, 86 VCAStatusAnswer, 79 ViewerShowAlarmByKey, 86 VCAStatusRequest, 79 ViewerShowAlarmByType, 87 VCChangeSceneByName, 83 ViewerSyncAudioAndVideo, 84 VCClearSceneByName, 83 ViewerTextOutput, 87 VCFullMode, 83 WatchdogActivate, 42 VCSceneChanged, 88 WatchdogDeactivate, 42 VCSetAudioLevel, 83 WatchdogTrigger, 42 VCShowViewerText, 83 ZoomIn, 35 VCStretchMode, 83 ZoomOut, 35 VideoContrastDetected, 79 ZoomStop, 35 VideoContrastFailed, 80 VideoSetImageBrightness, 80 VideoSetImageContrast, 80 VideoSetImageSaturation, 80 VideoSourceChanged, 80 VideoSyncDetected, 81 VideoSyncFailed, 81 ViewerChangeScene, 84 ViewerClear, 84 ViewerCleared, 88 ViewerClearScene, 84 ViewerClearTextOutput, 84 ViewerConnect, 84 ViewerConnected, 89 ViewerConnectLive, 85 ViewerExportPicture, 85 ViewerJumpByTime, 85 ViewerMaximize, 85 ViewerPlayFromTime, 85 ViewerPlayModeChanged, 89 ViewerPrintPicture, 86 116 GEVISCOPE actions – overview – v. 2.95 – September 5, 2013